JCID 15 Series Rear Camera Adaptor for V1SE / V1S Pro

₨ 4,000

iPhone 15 Rear Camera Adaptor

The JCID 15 Series Rear Camera Adaptor links the rear camera data of an iPhone 15 series handset to your JCID V1SE or V1S Pro programmer. You use it when a non-original rear camera triggers a pop-up warning or fails to pair after replacement. The board gives your programmer a direct read and write path to the camera data, so you work from verified information instead of trial and error. It covers the iPhone 15, 15 Plus, 15 Pro, and 15 Pro Max, and it slots into a bench that already runs JCID modules. Mobile repair shops in Pakistan add it to handle rear camera swaps on current-generation iPhones with a repeatable process.

In stock

17 People watching this product now!
Description

iPhone 15 Rear Camera Adaptor for JCID V1SE and V1S Pro

The iPhone 15 rear camera adaptor from JCID connects the rear camera data path of a 15 series handset to your V1SE or V1S Pro programmer. You reach for it after a rear camera swap, when iOS flags a non-original module with a pop-up or the new camera refuses to pair. Instead of guessing which part causes the warning, you read the camera data and write it where the system expects it. If your bench already runs a JCID programmer, this adaptor extends the same workflow to iPhone 15 rear cameras.

Camera Data Handling on the 15 Series

Every iPhone 15 series rear camera carries identity data that the logic board checks at boot. When a third-party or donor camera goes in, that data no longer matches, and the phone raises a non-genuine part warning. Some units also fail to pair the module inside the camera system. The JCID 15 Series Rear Camera R&W Adaptor gives your programmer a dedicated connection for reading and writing this data on the iPhone 15, 15 Plus, 15 Pro, and 15 Pro Max.

JCID also lists a soldering-type 15 series rear camera repair FPC that replaces the original camera flex by soldering, and the company positions it against the same pop-up and pairing faults. Pair the adaptor with that FPC and you cover both the data side and the flex side of the repair. This approach keeps the job on the camera path and leaves the logic board untouched.

Where It Sits in Your Repair Workflow

Place this adaptor at the verification stage of a camera job. Start with the mechanical work: open the handset, disconnect the battery, and swap the rear camera module. Use a stable PCB holder and a microscope when you handle the camera connector area, because the 15 series flex connections sit tight against neighboring components. If your job includes soldering on the camera flex, a controlled soldering station and a hot air station set to a safe profile protect the surrounding ICs and connectors. Keep a multimeter nearby to check for shorts on the camera power lines before you power the board up.

Once the hardware is stable, connect the adaptor to your programmer and run the rear camera read and write routine. Customers who bring in a hardware fault after a bad camera replacement usually describe the same symptoms: a pop-up on the home screen, a camera that lags, or a module that stays unrecognized. The adaptor addresses the data mismatch behind those symptoms, so you separate a data issue from a true board-level fault early. If the problem persists after a clean data write, you move on to board diagnostics and reballing work with confidence that the camera data is not the cause.

Programmer Compatibility and Setup Fit

JCID states that its 15 series rear camera repair products support the V1S Pro and V1SE, and it excludes the original V1S. The V1S Plus kit also lists this adaptor among its included modules. Check your programmer model and firmware before you order, because older units cannot run this module. Keep your programmer software updated through JCID’s release channel so the camera function stays available.

The adaptor is a small board, so it adds no bench footprint and travels easily between a workstation and a customer counter. Mechanicpk supplies it as a standalone module for shops that already own a V1SE or V1S Pro and need iPhone 15 rear camera coverage without buying a full combo set. Pair it with the front camera adaptor, true tone board, and battery board from the same JCID range, and you build a complete iPhone 15 service station around one programmer.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Dedicated rear camera read and write board for the iPhone 15 series
  • Works with JCID V1SE and V1S Pro programmers
  • Covers iPhone 15, 15 Plus, 15 Pro, and 15 Pro Max
  • Targets non-original rear camera pop-up warnings
  • Targets rear camera pairing faults after replacement
  • Pairs with JCID’s soldering-type 15 series rear camera repair FPC
  • Compact board that adds no bench footprint
  • Fits into the wider JCID adaptor range for front camera, battery, and true tone work

Specifications

BrandJCID
Model15 Series Rear Camera R&W Adaptor
CategoryiPhone Programmer Adaptors
CompatibilityJCID V1SE and V1S Pro programmers (also included in the V1S Plus kit); original V1S not supported
Supported DevicesiPhone 15, iPhone 15 Plus, iPhone 15 Pro, iPhone 15 Pro Max
TechnologyRear camera data read and write through a JCID programmer

Common Repair Uses

  • Rear camera data and pairing repair on iPhone 15 series handsets
  • Clearing the non-genuine rear camera pop-up after a camera replacement
  • Fixing rear camera pairing faults on a swapped module
  • Reading original rear camera data before a camera change
  • Writing camera data to the replacement camera path
  • Supporting soldering-type rear camera FPC repair jobs
  • Separating data faults from board-level faults during diagnosis

Compatible Devices

  • iPhone 15 series rear camera repair, used with JCID V1SE and V1S Pro programmers
  • iPhone 15
  • iPhone 15 Plus
  • iPhone 15 Pro
  • iPhone 15 Pro Max
  • JCID V1SE programmer
  • JCID V1S Pro programmer
  • JCID V1S Plus programmer (module included in the kit)

FAQ

What is the product name?
The product name is JCID 15 Series Rear Camera Adaptor for V1SE / V1S Pro.
What is the brand of this product?
The brand of this product is JCID.
What is the model of this product?
The model of this product is the 15 Series Rear Camera R&W Adaptor.
What is this product used for?
This product is used for reading and writing rear camera data on iPhone 15 series handsets to fix non-original camera pop-up and pairing problems.
Which devices are compatible with this product?
This product is compatible with the iPhone 15, iPhone 15 Plus, iPhone 15 Pro, and iPhone 15 Pro Max, and it runs on JCID V1SE and V1S Pro programmers.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this adaptor work with the original JCID V1S programmer?
No. JCID lists support for the V1S Pro and V1SE, and it excludes the original V1S. The V1S Plus kit also includes this module.
Will this adaptor remove the pop-up after I change the rear camera on an iPhone 15?
The adaptor reads and writes rear camera data to address the pop-up and pairing problems that a non-original camera causes. JCID also offers a soldering-type 15 series rear camera repair FPC for jobs that replace the original camera flex.