2UUL BT02 Double Sided Power Boot Battery Connector

₨ 1,500

2UUL BT02 Battery Connector for Power Boot

The 2UUL BT02 battery connector gives your repair bench a detachable, double-sided power boot solution for iPhone 8 to iPhone 15 Pro Max and selected Android models. When a board refuses to power on because the battery data is missing, you solder the BT02 onto the board and bring it up without the original battery. The double-sided buckle works from either face, and the 80 x 18 x 1 mm body weighs only 2 g, so it fits tight board layouts. Mechanicpk supplies the BT02 for technicians and repair shops across Pakistan who need a reliable battery-less boot connector.

Out of stock

12 People watching this product now!
Description

2UUL BT02 Battery Connector: Boot a Board Without the Original Battery

The 2UUL BT02 battery connector solves one specific bench problem: a motherboard that refuses to boot because the battery data it expects never arrives. 2UUL designed the BT02 as a detachable, double-sided power boot connector for iPhone 8 through iPhone 15 Pro Max and partial Android models. You solder it to the board, connect your power source, and test the logic board without the original battery in the loop. Pakistani technicians who run dead phone, charging issue, and boot loop issue jobs every day get a repeatable battery-less test lead, and Mechanicpk supplies it with the specification detail a buyer needs before ordering.

Double-Sided Buckle Design and Physical Build

The BT02 carries a double-sided buckle, so you can use either face of the connector. You skip the orientation re-check that slows down microscope work on tiny pads. The connector detaches, which means you solder the lead in place once and clip it on and off through repeated test cycles instead of reworking wires each time. The body measures 80 x 18 x 1 mm and weighs 2 g net, so the lead stays thin and light on a crowded board. You must solder it, so tin the pads cleanly, hold the board in a PCB holder, and check polarity with a multimeter before you apply any power. Keep your iron temperature controlled and avoid heating the pads longer than needed so the pad copper stays intact. A wrong connection on a live board costs you far more than the few seconds a polarity check takes.

Supported iPhone and Android Models

2UUL lists the BT02 for iPhone 8, X, 11, 12, 13, 14, and 15 series boards up to the Pro Max, and for partial Android models such as Huawei, Xiaomi Redmi, and Meizu. One model number covers a long run of iPhone generations, so a shop that sees mixed iPhone traffic works from a single connector model. The Android scope stays partial. Match your exact board and its battery connector layout before you order, and treat the iPhone range as the confirmed core of this tool. If a model sits outside the listed range, verify fit first rather than assuming it.

Where the BT02 Fits in Your Repair Workflow

In the PCB repair process, the BT02 belongs to the diagnostics and testing stage. After an IC change, a charging port repair, or a hardware fault fix, you power the board without the original battery and check whether it boots, instead of rebuilding the whole phone first. Boot loop issue and hang on logo cases need a stable power connection while you probe the board, and a soldered, detachable lead holds that connection in place.

Build the rest of the bench around it. A soldering station or hot air station handles the rework, a multimeter confirms polarity and voltage, a microscope lets you inspect each pad, and a PCB holder keeps the board steady while you solder. Reballing kits, test boxes, and ISP pinout tools cover the stages the BT02 does not touch. The BT02 stays a small accessory in the larger repair setup, but it removes one common blocker from your diagnostics: a board that stays dead only because the battery data is missing.

When you buy for a service center, check the iPhone range against your daily intake first. If your queue skews toward iPhone 11 through 15 boards, the BT02 matches that profile directly, and the partial Android support adds coverage for Huawei, Xiaomi Redmi, and Meizu jobs. The package contains one battery connector, so order enough units for the number of benches or technicians who test boards at the same time.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Detachable double-sided power boot battery connector
  • Double-sided buckle for use from either face
  • Solves boot failure caused by missing battery data
  • Covers iPhone 8 through iPhone 15 Pro Max
  • Partial Android coverage including Huawei, Xiaomi Redmi, and Meizu
  • Slim 80 x 18 x 1 mm body
  • Lightweight 2 g net weight
  • Solder-on installation for a firm connection to the board

Specifications

Brand2UUL
ModelBT02
CategoryTest Tools / Battery Boot Connector
CompatibilityiPhone 8 to iPhone 15 Pro Max and partial Android models
Supported DevicesiPhone 8, X, 11, 12, 13, 14, 15 series; partial Android models including Huawei, Xiaomi Redmi, Meizu
TechnologyDetachable double-sided buckle, solder-on installation
Dimensions80 x 18 x 1 mm
Weight2 g (net)

Common Repair Uses

  • Battery-less power-up and boot testing of iPhone and selected Android boards
  • Booting a board that stays dead without battery data
  • Battery-less power-up testing on the repair bench
  • Boot testing after an IC change
  • Boot testing after a charging port repair
  • Diagnosing boot loop issue on a bare board
  • Diagnosing hang on logo cases without the battery
  • Separating battery-related faults from hardware fault on the board
  • Repeated test cycles using the detachable connector

Compatible Devices

  • Devices: iPhone 8 to iPhone 15 Pro Max, plus partial Android models (verify the exact model before ordering)
  • iPhone 8 series
  • iPhone X
  • iPhone 11 series
  • iPhone 12 series
  • iPhone 13 series
  • iPhone 14 series
  • iPhone 15 series up to Pro Max
  • Partial Android models: Huawei, Xiaomi Redmi, Meizu

FAQ

What is the product name?
The product name is 2UUL BT02 Double Sided Power Boot Battery Connector.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is BT02.
What is this product used for?
This product is used for booting a phone motherboard that cannot power on because battery data is missing, so you can test the board without the original battery.
Which devices are compatible with this product?
This product is compatible with iPhone 8 to iPhone 15 Pro Max and partial Android models, including Huawei, Xiaomi Redmi, and Meizu.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the 2UUL BT02 need soldering?
Yes. You solder the BT02 to the board. The connector itself is detachable and has a double-sided buckle, so you can connect and disconnect it between tests after soldering.
Does the 2UUL BT02 work on all Android phones?
No. The BT02 supports partial Android models, including Huawei, Xiaomi Redmi, and Meizu. Check your exact model and battery connector layout before you order. The iPhone 8 to iPhone 15 Pro Max range is the confirmed core compatibility.