YCS Y-101 2D 5-in-1 Magnetic Screwdriver Set

₨ 2,800

YCS Y-101 Five-Bit Driver Set

The YCS Y-101 2D screwdriver set puts five single-bit screwdrivers in one box: Phillips 1.2 mm, tri-point Y0.6 mm, pentalobe 0.8 mm, center-plate 2.5 mm, and Torx T2. Each bit uses a hardened alloy tip with a magnetized head that holds micro screws in place, and noise-reducing bearings keep the rotation smooth. You open iPhone and Android housings, release shield and mid-plate screws, and reassemble without rounding the heads. Mechanicpk supplies the Y-101 to Pakistani repair shops and service centers that need a compact, repeatable screw-access set for daily disassembly.

In stock

11 People watching this product now!
Description

Y-101 Five-Bit Screwdriver Set for Phone Disassembly

The YCS Y-101 2D screwdriver set solves the first problem every repair job throws at you: getting into the phone without damaging the screws that hold it shut. YCS packs five screwdrivers into one box, and each screwdriver carries a hardened alloy bit for a screw type you meet daily on iPhone and Android handsets: Phillips 1.2 mm, tri-point Y0.6 mm, pentalobe 0.8 mm, center-plate 2.5 mm, and Torx T2. If your shop opens dozens of phones a day, this set gives every technician the same consistent entry tools instead of a drawer of mixed, worn bits.

YCS Y-101 Bit Coverage and Build Quality

Each bit profile maps to a specific screw family. The Phillips 1.2 mm bit handles the small cross screws on shields, brackets, and connector covers. The Y0.6 tri-point bit reaches the tri-point screws inside iPhone-class handsets, and the 0.8 mm pentalobe bit opens the bottom screws on iPhone housings. The 2.5 mm center-plate bit targets mid-plate screws, while the T2 bit turns Torx-headed screws that appear on several Android models. Because each bit sits on its own screwdriver, you grab the correct profile in one move and skip tip swapping mid-job.

YCS builds the bits from a special hard alloy and magnetizes the entire bit head, so a micro screw stays on the tip while you carry it from the board to your screw tray. Wear-resistant, noise-reducing bearings keep the rotation smooth, which matters when you work slowly under a microscope and cannot afford a slipped driver. Seat the bit fully in the screw head before you apply pressure; a fully seated bit turns cleanly and keeps the head intact.

Where the Y-101 Fits in Your Mobile Repair Workflow

Screw access starts every job: screen replacement, battery swap, charging port repair, and board-level work all begin with housing and shield screws. You reach for the Y-101 before heat, before probes, and before any hot air station touches a board. Once the phone is open and the shield is off, you move to your multimeter for a dead phone check, then to your PCB holder and microscope for IC-level inspection. If the fault sits on the board, your soldering station or reballing kit takes over, and your test box handles the software side after you close the phone.

A clean teardown protects the screw posts and the board, so the Y-101 does its most important work before IC change karna or jumper lagana even begins. For a charging issue or display problem, the same five bits cover most of the screws between you and the faulty part.

Why Technicians Pick the YCS Y-101 for Mobile Repair

The Y-101 is a manual 2D precision set, so you get dependable screw access without a power unit. If your bench later needs fixed-torque control for delicate assemblies, torque screwdrivers form the natural upgrade path from this set. Mechanicpk supplies the Y-101 to shops and service centers across Pakistan that want to standardize their teardown kit: every technician carries the same five profiles, and when a bit wears out you replace that one screwdriver with the same model instead of re-sorting a mixed collection. Keep the set beside your soldering stations, hot air stations, and microscope so the first and last steps of every repair stay within arm’s reach.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Five screwdrivers in one box, one per bit profile
  • Phillips 1.2 mm, Y0.6, pentalobe 0.8 mm, center-plate 2.5 mm, and Torx T2 coverage
  • Special hard alloy bits for wear resistance
  • Fully magnetized bit head that holds micro screws
  • Strong, long-lasting magnetism for easy screw pickup
  • Wear-resistant, noise-reducing bearings for smooth rotation
  • 2D precision design for phone and small-electronics disassembly
  • Standardizes teardown tools across multiple technicians

Specifications

BrandYCS
ModelY-101
CategoryMobile Repair Screwdrivers
CompatibilityUniversal by screw type (not device-specific)
Technology2D precision screwdriver with magnetized bit heads and noise-reducing bearings
MaterialHigh-hardness alloy bits
Bit SizesPhillips 1.2 mm, Tri-point Y0.6 mm, Pentalobe 0.8 mm, Center-plate 2.5 mm, Torx T2
Package Contents5 x Screwdrivers

Common Repair Uses

  • Screw access and teardown across phone and small-electronics repair.
  • Opening iPhone housings by removing bottom pentalobe screws
  • Screen replacement teardown
  • Battery replacement
  • Charging port repair access
  • Shield and bracket removal before board-level repair
  • Mid-plate screw removal
  • Connector cover removal
  • Final reassembly after IC change karna or jumper lagana work

Compatible Devices

  • Universal by screw type. The set fits any device that uses these five screw profiles; it is not tied to specific models.
  • iPhone models with pentalobe 0.8 mm bottom screws
  • iPhone-class handsets with tri-point Y0.6 internal screws
  • Android phones with Phillips 1.2 mm cross screws
  • Android models with Torx T2 screws
  • Handsets with 2.5 mm center-plate (mid-plate) screws
  • Tablets, laptops, and cameras with matching micro screws

FAQ

What is the product name?
The product name is YCS Y-101 2D 5-in-1 Magnetic Screwdriver Set.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is Y-101.
What is this product used for?
This product is used for opening and reassembling phones and small electronics by removing and fitting micro screws.
Which devices are compatible with this product?
This product fits any device that uses Phillips 1.2 mm, tri-point Y0.6 mm, pentalobe 0.8 mm, center-plate 2.5 mm, or Torx T2 screws, including many iPhone and Android handsets.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which bit sizes come in the YCS Y-101 5-in-1 set?
The set includes Phillips 1.2 mm, tri-point Y0.6 mm, pentalobe 0.8 mm, center-plate 2.5 mm, and Torx T2, one per screwdriver.
Is the YCS Y-101 a torque screwdriver?
The Y-101 is a magnetic 2D precision set. Fixed-torque control comes from separate YCS torque models.