Kada 936 Soldering Iron Handle for 852D+ & 2018D+ Stations

₨ 1,200

Kada 936 Handle for 852D+ and 2018D+

The Kada 936 soldering iron handle replaces the iron side of Kada 852D+ and 2018D+ rework stations, plus other 936-type stations that run a 24V, 5-pin iron. It ships with a 900M-T-I tip and uses a ceramic heating core, so your station heats up quickly and holds temperature during board-level work. A high-temperature silicone grip keeps your hand comfortable through long sessions on charging ports, connectors, jumper points, and shield removal. If your current iron is dead, intermittent, or throwing sensor errors, this handle puts the station back on your repair bench without a full station replacement. Mechanicpk supplies it for Pakistani repair shops and service centers.

In stock

12 People watching this product now!
Description

Kada 936 Soldering Iron Handle for Kada 852D+ and 2018D+ Stations

A dead iron stalls your whole bench, whether you reflow a charging port flex or lift a shield on a dead phone board. The Kada 936 soldering iron handle replaces the iron side of Kada 852D+ and 2018D+ rework stations and other 936-type stations that run a 24V, 5-pin iron. Mechanicpk supplies it with a 900M-T-I tip, so you swap the handle, plug it in, and get the station back in service without buying a new unit.

5-Pin Connection and Heater Format

The handle takes its 24V supply from the station and draws up to 50W. Its ceramic heating core reaches working temperature fast and recovers quickly when you drag across a large ground plane. Listings for this handle identify the heater as an A1322 format, the same 936-type heater family many technicians already stock as a spare. The 5-pin connector carries both the heater and the temperature sensor signal, so the station reads the tip temperature the same way it did with the original iron. The handle weighs about 90g and wears a high-temperature silicone grip, which keeps your fingers away from the hot metal body during extended hardware fault repairs.

Where It Sits on the Rework Bench

Most soldering work in a Pakistani mobile repair shop runs through this iron: IC change karna on small packages, pad cleaning after a chip lift, replacing charging port and battery connectors, and jumper lagana on broken tracks. It also handles the wire soldering that ISP and eMMC repair needs when you tap test points on a dead-after-flash board. Pair the iron with a hot air station for BGA and shield work, a microscope for pad inspection, a multimeter for continuity checks, and a PCB holder to keep the board steady. If you reball chips, a reballing kit covers the step the iron cannot. Together these tools form a complete soldering and rework workflow, with this handle as the daily-use touch point.

Fit Check Before You Order

This handle belongs to the soldering iron side of the station only. The hot air gun on a Kada 2018D+ uses its own separate handle with a different connector, so do not order this part for that job. Before you buy, confirm that your station feeds a 24V, 5-pin iron. If your station shows a sensor or “no iron” error with the old handle, check the old handle’s heater and cable first; if the station powers up normally with the new handle, the fault sat in the iron. Listings for this handle name Kada 852D+, 852AD+, 852, 952, 903D, and 2018D+ iron connections, along with 853D, 878AD, 898D, 936B, and 937D stations. Use the same 900M-T-I tip family for easy tip changes. When the station itself fails and not just the iron, a full soldering station upgrade makes more sense than another handle swap.

Additional information
Weight0.85 kg
Q & A
Please login to post questions

Key Features

  • 24V, 5-pin connection for 936-type stations
  • Ceramic heating core for fast heat-up
  • 50W maximum power draw
  • Includes 900M-T-I tip
  • High-temperature resistant silicone grip
  • Lightweight body, approx. 90g
  • Replaces the iron on Kada 852D+ and 2018D+ stations
  • Restores a station without replacing the whole unit

Specifications

BrandKada
Model936
CategorySoldering Iron Handle
CompatibilityKada 852D+, 852AD+, 852, 952, 903D, 2018D+ (soldering iron side); 936-type 24V stations
TechnologyCeramic heating core, 5-pin connector
MaterialHigh-temperature resistant silicone grip
Input Voltage24V (supplied by the station)
Power Rating50W maximum
WeightApprox. 90g

Common Repair Uses

  • Board-level soldering and rework on mobile phone PCBs
  • Charging port replacement
  • Battery connector replacement
  • Jumper wire soldering on broken tracks
  • Pad cleaning after IC removal
  • ISP and eMMC test point wire soldering
  • Shield and small component rework
  • Display and flex connector repair
  • Replacing a failed or intermittent station iron

Compatible Devices

  • Soldering stations with a 24V, 5-pin iron connection
  • Kada 852D+
  • Kada 852AD+
  • Kada 2018D+ (soldering iron side only)
  • Kada 903D
  • Kada 952
  • 853D
  • 898D
  • 936B and 937D stations

FAQ

What is the product name?
The product name is Kada 936 Soldering Iron Handle for Kada 852D+ and 2018D+ stations.
What is the brand of this product?
The brand of this product is Kada.
What is the model of this product?
The model of this product is 936.
What is this product used for?
This product is used as a replacement soldering iron handle for board-level soldering and rework on mobile phone PCBs.
Which devices are compatible with this product?
This product is compatible with Kada 852D+, 852AD+, 852, 952, 903D, and 2018D+ iron connections, plus 936-type 24V, 5-pin soldering stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this handle fit the hot air gun of the Kada 2018D+ station?
No. This handle replaces the soldering iron side only. The hot air gun on the 2018D+ uses a separate handle with its own connector.
Which tip comes with the Kada 936 soldering iron handle and what voltage does it run on?
The handle includes a 900M-T-I tip and runs on 24V supplied by the station, with a maximum draw of 50W.