Mijing MJ-17N Auto Range True-RMS Digital Multimeter
₨ 6,200
MJ-17N Auto Range Multimeter
The Mijing MJ-17N digital multimeter gives your repair bench an auto-ranging, True-RMS meter with a 6000-count LCD. You test AC/DC voltage, AC/DC current, resistance, capacitance, diode, continuity, and frequency from one compact unit, so you trace a hardware fault on a mobile motherboard or PCB without swapping meters. Auto range selects the correct measurement range for you, which speeds up battery line, charging path, and short-circuit checks on a dead phone. The kit includes the meter with its battery and two test leads (red and black), so you start testing the moment it arrives at your workshop.
In stock
Mijing MJ-17N Digital Multimeter for Board-Level Fault Finding
The Mijing MJ-17N digital multimeter gives technicians an auto-ranging, True-RMS meter built around a 6000-count LCD. Mechanicpk supplies it to repair professionals who isolate dead phone boards, charging issue faults, and short circuits and need a compact instrument that picks the measurement range on its own. You connect the red and black leads, select the function, and the meter handles the range. That removes the manual range switching that slows down a busy workshop and cuts the risk of selecting the wrong range on a live board.
Measurement Functions on the MJ-17N
The MJ-17N covers AC voltage, DC voltage, AC current, DC current, resistance, capacitance, diode testing, continuity testing, and frequency. That list matches the first-line checks a technician runs on a motherboard: battery voltage, charging line voltage, shorted rails, filter capacitors, and protection diodes. The 6000-count display resolves small DC values more finely than a basic 2000-count meter, which matters when you compare a healthy rail against a suspect one. True-RMS measurement reads AC signals accurately even when the waveform departs from a clean sine wave. Auto range then keeps every reading on the correct scale without extra knob work, which makes this auto range multimeter for mobile repair a practical daily-carry tool.
Where the MJ-17N Fits in Your Repair Workflow
A multimeter sits at the start of almost every hardware fault diagnosis. You probe the battery connector and charging port first, check continuity on a suspect line, and switch to diode mode to compare readings across a rail that you suspect has a shorted IC or capacitor. Once the meter points you to the faulty section, you move to the next stage of the repair. A microscope helps you inspect the area, a hot air station or soldering station handles the IC change or component replacement, and reballing kits and PCB holders keep the board stable while you work.
The MJ-17N also earns its place before you reach for programmer tools. When a phone shows dead after flash or hangs on logo, a quick voltage and continuity check separates a power or hardware problem from a software problem. You confirm the rails first, and only then connect ISP pinout tools, eMMC programmers, UFS adapters, or a test box. That order saves hours of box chalana on boards that never had a software fault. This True-RMS multimeter for PCB testing supports that decision point in the PCB repair process.
What You Get With the MJ-17N
Each unit ships as the MiJing MJ-17N digital multimeter with its battery installed and two test leads, one red and one black. You do not hunt for a battery before your first measurement. Shop owners who equip several benches choose a compact, auto-ranging meter like this because every technician on the team reads the same display and follows the same measurement steps. As your repair work grows, you keep the MJ-17N as your fast first-check meter and add specialised microscopes, hot air stations, and programmers around it.
| Weight | 0.7 kg |
|---|
Key Features
- ✓True-RMS measurement for accurate AC readings
- ✓Auto range selection removes manual range switching
- ✓6000-count LCD display
- ✓AC and DC voltage measurement
- ✓AC and DC current measurement
- ✓Resistance, capacitance, diode, and continuity testing
- ✓Frequency measurement
- ✓Includes battery and two test leads (red and black)
Specifications
| Brand | MiJing |
|---|---|
| Model | MJ-17N |
| Category | Digital Multimeter |
| Compatibility | Universal — measures any mobile phone motherboard or electronic circuit board (not device-specific) |
| Supported Devices | Mobile phone motherboards, PCBs, and electronic circuit boards |
| Technology | True-RMS, auto-ranging, 6000-count LCD display |
Common Repair Uses
- ✓Board-level voltage, continuity, and component checks during mobile phone and PCB diagnostics
- ✓Charging issue diagnosis at the charging port and charging line
- ✓Dead phone power rail checks
- ✓Short circuit tracing with continuity and resistance modes
- ✓Diode-mode testing on protection diodes and suspect ICs
- ✓Capacitor checks on filter and decoupling components
- ✓Battery voltage and battery connector testing
- ✓Hardware fault confirmation before flashing or box work
- ✓General electronics diagnostics and troubleshooting
Compatible Devices
- ✓Universal measurement scope — not device-specific; the meter tests any phone motherboard or circuit board you probe
- ✓Samsung smartphone motherboards
- ✓Oppo and Realme motherboards
- ✓Vivo motherboards
- ✓Infinix and Tecno motherboards
- ✓Xiaomi and Redmi motherboards
- ✓iPhone logic boards
- ✓Qualcomm and MediaTek based phone boards
- ✓General electronic circuit boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which measurements does the MJ-17N digital multimeter support?
Can I use the MJ-17N to find a short circuit on a dead phone board?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



