2UUL SC10 CPU Fever Paste 50g Thermal Grease

₨ 1,500

2UUL SC10 Thermal Paste for Mobile CPU Repair

2UUL SC10 CPU Fever Paste cools a CPU after soldering repair as a 50 g silicone thermal conductive grease. Apply it as thermal paste for mobile repair after you reball or reflow a BGA chip. The same pack also covers GPU and microcontroller development board work. The manufacturer states it does not solidify at low temperatures or harden in high-temperature environments, and it targets the lag and frequent restarts that high chip temperature causes. The universal fit, compact 40 x 40 x 125 mm pack, and 2UUL brand make it a practical consumable for repair shops and service centers.

In stock

19 People watching this product now!
Description

Thermal Paste for Mobile Repair: 2UUL SC10 CPU Fever Paste

Thermal paste for mobile repair earns its place on the bench the moment a CPU goes through reflow or reballing, and the 2UUL SC10 CPU Fever Paste gives you a 50 g supply to cover that work. 2UUL positions this silicone-based thermal conductive grease for cooling a CPU after soldering repair, which targets the lag, game crashes, and frequent restarts that high chip temperature causes. Mechanicpk stocks it for technicians and repair shops that treat thermal management as part of the finished repair, not an afterthought.

Where the SC10 Fits in a CPU Repair Workflow

A typical BGA CPU job starts with a hot air station and a preheater, moves through pad cleaning and reballing, and finishes on a soldering station once the chip sits on the board. You hold the board in a PCB holder, inspect the joints under a microscope, and confirm the rails with a multimeter before you close the phone. The 2UUL SC10 CPU Fever Paste belongs at the end of that sequence. You apply it after the soldering stage, so the repaired CPU returns to service with a thermal interface already in place. That step suits phones that arrive with a hardware fault after earlier rework, where you want the repaired chip finished properly. Technicians who handle dead phone cases, hang on logo faults, or boot loop issues at chip level get a repeatable finishing step instead of improvising with leftover compound. Run a short stress test before handover, such as an extended game session or a long call, to confirm the phone no longer lags or restarts under load.

Material, Pack Size, and Handling

2UUL builds the SC10 from silicone-based thermal conductive grease and supplies it as a 50 g pack. The retail unit measures 40 x 40 x 125 mm and weighs 71 g net including the container, so it fits a bench drawer or tool tray without taking space. The manufacturer states the grease does not solidify at low temperatures and does not harden in high-temperature environments. That behavior keeps the paste workable across the temperature swings a workshop sees through the year. Apply a thin, even layer, because the paste needs contact area, not thickness. Wipe excess off the board edges before reassembly, so loose grease never reaches nearby pads or connectors. Buyers who compare consumables check the same details first: brand 2UUL, model SC10, a 50 g fill, and a universal fit across CPU, GPU, and development board work. The grease is not tied to a phone model, so you match it to the job, not to a handset.

Applications Beyond Phone CPUs

The SC10 serves more than one board type. 2UUL lists CPU, GPU, and microcontroller development board use, and the grease carries no device-specific limits, so the same pack covers a phone CPU repair today and a GPU or development board job tomorrow. Shops that already stock Reballing Kits, Hot Air Stations, and Soldering Stations add it to the same consumables shelf, and it completes a CPU rework setup alongside Microscopes and PCB Holders. Technicians who also repair dead phone eMMC or UFS faults through ISP Pinout Tools, eMMC Programmers, and UFS Adapters often return the same board for CPU rework, and Test Boxes confirm the phone boots cleanly before it leaves your bench. A 50 g pack lasts across many jobs, so you refill your bench supply less often than with small sachets. Keep one labeled pack beside your hot air station so the finishing step never gets skipped on a busy day. Mechanicpk supplies the SC10 alongside the tools above, so one order covers the full CPU repair bench. For a Pakistani repair shop that finishes several CPU jobs every week, that consistency keeps every repaired board on the same thermal standard.

Additional information
Weight0.71 kg
Q & A
Please login to post questions

Key Features

  • 50 g silicone thermal conductive grease pack
  • Designed for cooling a CPU after soldering repair
  • Targets lag, game crashes, and restarts from high CPU temperature
  • Manufacturer states it does not solidify at low temperatures or harden at high temperatures
  • Rapid heat dissipation, per the manufacturer
  • Multi-scenario use on CPU, GPU, and microcontroller development boards
  • Universal fit with no device-specific limits
  • Compact 40 x 40 x 125 mm retail pack, 71 g net

Specifications

Brand2UUL
ModelSC10
CategoryThermal Paste / Thermal Conductive Silicone Grease
CompatibilityUniversal (CPU, GPU, microcontroller development boards)
Supported DevicesUniversal, not device-specific
TechnologySilicone-based thermal conductive grease
MaterialSilicone
Dimensions40 x 40 x 125 mm
Weight71 g net, 83 g gross (50 g paste)

Common Repair Uses

  • Cooling a CPU after soldering repair
  • Finishing a BGA CPU job after reballing or reflow
  • Reducing lag caused by high CPU temperature
  • Reducing frequent restarts and game crashes caused by high CPU temperature
  • Thermal interface for GPU chip repairs
  • Thermal interface for microcontroller development board work

Compatible Devices

  • Universal scope, not device-specific
  • Mobile phone CPU chips after reballing or reflow
  • BGA CPU chips on mobile phone PCBs
  • GPU chips
  • Microcontroller development boards
  • General CPU cooling after soldering repair
  • Chip-level boards in repair shops and service centers

FAQ

What is the product name?
The product name is 2UUL SC10 CPU Fever Paste.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC10.
What is this product used for?
This product cools a CPU after soldering repair and reduces lag and frequent restarts caused by high CPU temperature.
Which devices are compatible with this product?
This product has a universal fit. It works on CPU, GPU, and microcontroller development boards and has no device-specific limits.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use 2UUL SC10 on a mobile phone CPU after BGA reballing?
Yes. 2UUL designs the SC10 for cooling a CPU after soldering repair, so you apply a thin layer once the reballed chip sits on the board.
Does 2UUL SC10 thermal grease solidify at high or low temperatures?
The manufacturer states the grease does not solidify at low temperatures and does not harden in high-temperature environments.