Sunshine SS-001A Pro (7.5inches) Storage Box Pakistan
₨ 500
Double-Layer Mobile Repair Storage Box
The Sunshine SS-001A Pro (7.5inches) Storage Box gives each repair ticket its own double-layer container. The lower layer holds up to two large-screen phones within 7.5 inches, while the upper layer stores motherboards, chips and screws in a numbered screw storage area. Each layer locks independently, so parts stay put when you carry a job between the soldering bench and the testing table. Sunshine builds the case from thickened, high-hardness PVC that stays light on the bench. Technicians and repair shops across Pakistan use it to keep dead phone, charging issue and display problem jobs organised from teardown to reassembly.
Out of stock
Sunshine SS-001A Pro (7.5inches) Storage Box: Technical Overview for Repair Benches
The Sunshine SS-001A Pro (7.5inches) Storage Box is a double layer mobile repair storage box that follows one rule: one box per repair job. Sunshine builds the case from thickened, high-hardness PVC and splits it into two locking layers, so large phone assemblies and loose board-level parts never share the same space. Mechanicpk supplies it as a bench-organisation product, and its value comes from what the layout prevents: mixed-up screws, scratched screens and boards sliding around mid-teardown. You get a physical container that matches how professional repair workflows actually run, from first teardown to final reassembly.
Double Layer Mobile Repair Storage Box: How the Two Layers Work
The lower layer holds up to two large-screen phones within 7.5 inches, which covers iPhone Pro Max and Ultra series handsets. The upper layer takes the small parts: motherboards, chips and screws. That vertical split keeps screens away from sharp board edges and solder residue, a real risk when you open a hardware fault case and strip a phone down to the mainboard. Each layer carries its own lock, and the buckles close tightly enough to stop components falling out when you lift the box.
Thickened, high-hardness PVC keeps the box light and impact resistant, so you can carry a job between the soldering bench and the testing table without worrying about knocks. The compact footprint stacks cleanly, which lets a busy workshop keep a row of pending jobs on one shelf and open any single box without disturbing the rest. Technicians who currently sort parts into loose trays or plastic bags gain a fixed layout that works the same way on every job.
Numbered Screw Storage for Ticket-Based Repair Workflows
The box includes a screw storage area with digital prompts. Each compartment carries a number, so you drop screws in sequence during teardown and pull them back in the same order at reassembly. That discipline matters on phones where screw lengths differ by position, because a wrong screw in the wrong hole can crack a board or press on a flex cable. Pair the box with a job ticket and you build a repeatable intake step: phone and display in the lower layer, board and screws in the upper layer, ticket number on the lid.
Shops that handle boot loop issue, hang on logo and dead after flash jobs often keep several phones waiting for software or part arrivals. A labelled box per phone keeps that queue readable. The upper layer also takes chips you remove during IC change work, so a charging IC or PMIC stays with the job it came from instead of disappearing into a shared parts tray.
Where This Mobile Phone Motherboard Storage Box Fits in Your Workflow
Use this mobile phone motherboard storage box at the start and end of every job. At intake, strip the phone, sort parts into the layers and close both locks. During board work, pull only the motherboard onto a PCB holder under your microscope, then move it to a soldering station or hot air station for IC change or reballing, while the screen and back glass stay locked below. After the repair, check the board with a multimeter or test box, return it to the upper layer and rebuild the phone with every screw back in sequence. The box does not replace a PCB holder or a reballing kit. It protects the parts those tools work on.
Check size before you buy. The lower layer suits phones within 7.5 inches, and larger devices will not fit. As a double layer mobile repair storage box, the SS-001A Pro suits shop owners who want ticket-based storage across the whole bench, trainers at technical institutes who want students to keep work organised, and technicians who move jobs between a service counter and a repair bench.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Double-layer design separates screens from board-level parts
- ✓Lower layer holds two large-screen phones within 7.5 inches
- ✓Upper layer stores motherboards, chips and screws
- ✓Independent lock on each layer
- ✓Numbered screw storage area with digital prompts
- ✓Thickened, high-hardness PVC build
- ✓Lightweight and portable for moving jobs around the shop
- ✓Stackable layout for shelf storage of pending jobs
Specifications
| Brand | Sunshine |
|---|---|
| Model | SS-001A Pro |
| Category | Storage Boxes |
| Compatibility | Smartphones up to 7.5 inches; motherboards, chips, screws and small repair components |
| Supported Devices | Large-screen mobile phones within 7.5 inches, including iPhone Pro Max and Ultra series |
| Technology | Double-layer construction with an independent lock on each layer and a numbered screw storage area |
| Material | Thickened, high-hardness PVC |
Common Repair Uses
- ✓Job-by-job storage across teardown, board repair and reassembly
- ✓Mobile phone teardown and reassembly
- ✓Motherboard storage during board repair
- ✓Screw sorting by numbered compartment
- ✓Holding removed ICs and chips during IC change work
- ✓Separating screens from boards on display problem jobs
- ✓Parking dead phone and charging issue jobs awaiting parts
- ✓Queueing boot loop issue and hang on logo jobs awaiting software
- ✓Ticket-based storage in repair shops and training labs
Compatible Devices
- ✓Smartphones up to 7.5 inches in the lower layer, and board-level parts in the upper layer
- ✓Large-screen smartphones within 7.5 inches (two per lower layer)
- ✓iPhone Pro Max series
- ✓Samsung Ultra series
- ✓Android phones within 7.5 inches
- ✓Mobile phone motherboards
- ✓LCD screens
- ✓IC chips
- ✓Screws and other small components
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many phones fit in the lower layer of the SS-001A Pro?
Can I keep the motherboard and screws separate from the phone screen in this box?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



