RELIFE RL-717 IP17 Rocket Head Screwdriver for iPhone 17
₨ 1,500
iPhone 17 Rocket Head Screwdriver for Repair Benches
The RELIFE RL-717 IP17 Rocket Head Screwdriver gives your bench a dedicated driver for the iPhone 17 series. Its S2 steel bit fits the IP17 screw profile, so you turn fasteners without rounding the head or marking the housing. A rotating rocket-head crown on a silent bearing keeps the shaft steady under light downward pressure, and the built-in magnet holds each micro screw until you place it. The sandblasted, textured handle keeps your grip controlled through long teardown sessions. Mechanicpk supplies this iPhone 17 rocket head screwdriver to repair shops, service centers, and technicians across Pakistan who open new Apple models every day.
In stock
RELIFE RL-717 IP17 Rocket Head Screwdriver for iPhone 17 Teardowns
Every new iPhone generation changes what your bench needs to open it. The RELIFE RL-717 IP17 Rocket Head Screwdriver is the IP17 tip in the RL-717 rocket head range, cut for the screw profile on the iPhone 17, iPhone 17 Pro, and iPhone 17 Pro Max. If you need an iPhone 17 rocket head screwdriver, this driver does that one job precisely, instead of a general-purpose bit that almost fits. A bit that almost fits strips a screw head in seconds, and a stripped screw turns a ten-minute battery swap into a salvage job.
Why an iPhone 17 Rocket Head Screwdriver Beats a Generic Bit
The bit is S2 alloy steel, which one distributor lists as vacuum-hardened. Hardness decides how long the tip keeps its profile. Soft steel wears against micro screws, then cams out and chews the screw head. S2 holds its shape through repeated teardowns, so the tenth phone of the week still gets a clean engagement.
The crown rotates on a micro-ball bearing built to reduce wobble and noise. Supplier documentation states the bearings passed more than 10,000 test cycles. In practice, you rest your index finger on the crown, press down along the screw axis, and spin the shaft with your thumb and middle finger. All the force goes into the screw instead of sideways into the tip.
A magnet sits in the drive head and holds each screw on the bit as you lift it out. You stop chasing loose screws across the mat, and you stop dropping them onto an open board where a stray fastener can short a rail.
Where It Fits in an iPhone 17 Repair Workflow
A typical iPhone 17 teardown runs in a fixed order: separate the display, disconnect the battery, remove the brackets, then lift the logic board for board-level work. The RL-717 IP17 handles the fasteners on that path that match its profile. You reach for it on battery replacements, display swaps, charging port jobs, and any hardware fault that needs the board out of the chassis.
Pair it with the rest of your bench. Hot Air Stations loosen adhesive before you open the frame. Microscopes confirm what you see on the board once the shield comes off. PCB Holders keep the board steady while you work, and Multimeters and Test Boxes let you check a dead phone or a charging issue before you close the device. Tracking screws in order and returning each one to its own position matters on a phone this dense, and the magnetic tip makes that routine faster.
The handle uses a sandblasted, textured, non-slip surface and a lightweight corrosion-resistant build, so it stays controlled when your fingers carry flux residue or isopropyl alcohol.
Choosing the IP17 Tip Within the RL-717 Range
The RL-717 family sells in several tip models: IP17, +1.5, Y0.6, *0.8, and PCB+. Each model targets a different fastener, and the IP17 tip is the one made for the iPhone 17 series. Keep it as a dedicated driver beside your other RL-717 tips instead of swapping one tool across every job. Using the right tip for each screw protects the board, the housing, and your repair time.
For shop owners, this is a low-cost way to keep new-model readiness on every technician’s bench. If you plan to move from teardown into board work, the natural upgrade path runs through Soldering Stations, Reballing Kits, and Microscopes. The RELIFE RL-717 IP17 Rocket Head Screwdriver covers the step before all of those: opening the phone cleanly and closing it without damage.
| Weight | 0.3 kg |
|---|
Key Features
- ✓IP17 tip cut for the iPhone 17 series screw profile (LP17)
- ✓S2 alloy steel bit for wear resistance on micro screws
- ✓Rotating rocket-head crown for steady, axial pressure
- ✓Micro-ball silent bearing that reduces wobble and noise
- ✓Built-in magnet that holds screws on the bit during removal
- ✓Sandblasted, textured non-slip handle
- ✓Lightweight, corrosion-resistant handle body
- ✓Part of the RL-717 rocket head range alongside +1.5, Y0.6, *0.8, and PCB+ tips
Specifications
| Brand Entity | RELIFE |
|---|---|
| Product Entity | RELIFE RL-717 IP17 Rocket Head Screwdriver |
| Technology Entity | S2 alloy steel bit, rotating rocket-head crown with micro-ball silent bearing, magnetic drive head |
| Compatible Device Entities | iPhone 17, iPhone 17 Pro, iPhone 17 Pro Max |
| Repair Process Entity | iPhone disassembly, battery replacement, display replacement, logic board removal |
| Industry Entity | Mobile repair industry, Pakistan |
Common Repair Uses
- ✓Verified scope is iPhone 17 series disassembly and reassembly
- ✓Opening the iPhone 17 series for internal repair
- ✓Display replacement and screen separation
- ✓Battery replacement
- ✓Charging issue and charging port repair access
- ✓Removing brackets and shields to reach the logic board
- ✓Logic board removal for board-level repair
- ✓Reassembly with magnetic screw holding
- ✓New-model teardown work in repair shops and service centers
Compatible Devices
- ✓Verified scope is the iPhone 17 series (IP17 / LP17 screw profile)
- ✓iPhone 17
- ✓iPhone 17 Pro
- ✓iPhone 17 Pro Max
- ✓iPhone 17 series fasteners matching the IP17 / LP17 profile
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the RELIFE RL-717 IP17 hold screws magnetically?
Can the IP17 tip replace the other RL-717 screwdrivers?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



