RF4 RF-FO26 360-Degree Rotating Arm Stand

₨ 10,500

RF4 RF-FO26 Microscope Arm Stand

The RF4 RF-FO26 360-Degree Rotating Arm Stand carries your repair microscope on an alloy structure with three adjustment axes: up and down, forward and backward, and a full 360-degree rotation. You position the optics over the board, then swing them clear when you pick up the hot air gun or soldering iron. It suits any microscope arm stand for mobile repair bench where you handle CPU reballing, charging IC work, and connector inspection every day. The stand comes as a single arm stand, and the microscope is a separate purchase. Mechanicpk lists it for Pakistani repair shops, service centers, and training labs.

In stock

14 People watching this product now!
Description

RF4 RF-FO26 360-Degree Rotating Arm Stand for Board-Level Microscope Work

The RF4 RF-FO26 360-Degree Rotating Arm Stand turns a fixed microscope setup into a movable inspection station. A microscope arm stand for mobile repair earns its place when you can reach the whole board and then clear the bench in one swing, and the RF-FO26 gives you that range of motion. You adjust it up and down, forward and backward, and through a full 360-degree rotation. The stand uses an alloy structure, so the arm holds your chosen position while you inspect fine-pitch components. Mechanicpk lists it for Pakistani repair shops, service centers, and training labs that run stereo microscopes every day.

Why This Microscope Arm Stand for Mobile Repair Moves in Three Axes

Board-level work never stays in one position. You inspect a charging IC, lift the board edge to check a flex connector, then move to the CPU area for reballing, all within a single repair. The RF-FO26 lets you raise or lower the microscope to set focus distance, extend or retract the arm to reach the target zone, and rotate the whole assembly through 360 degrees to park it out of the way. That rotation pays off during rework. You swing the microscope aside, bring in your hot air station or soldering station without the microscope body blocking your hands, and swing it back to check every joint under magnification. On a dead phone with a hardware fault, that cycle of inspect, rework, and re-inspect repeats many times, so a stand that moves smoothly saves real minutes per board. Display problem repairs benefit too, because you can check connector pins under magnification before you close the phone.

Alloy Structure and Stability at High Magnification

High magnification exaggerates every small shake. A stand that drifts forces you to refocus mid-joint, and a refocus in the middle of a micro-solder pass costs you accuracy. The RF-FO26 uses an alloy structure aimed at durability and steady positioning, which suits the precision demands of PCB repair. The swing arm design also frees bench space, because you fold the optics away instead of leaving a bulky pillar over your work area. Pair the stand with a solid PCB holder and a stable bench, and the whole setup holds still while you work on tiny pads. Check your microscope head’s mounting size against the stand before you order, since supplier listings describe the stand as compatible with most professional microscopes, not every model. The package contains one arm stand. You buy the microscope separately.

Where the RF-FO26 Fits in Your Repair Workflow

Place the RF-FO26 at the center of your microscope station and build the rest of the bench around it. It connects to the diagnostics and rework stages directly. You trace a boot loop issue or a charging issue with a multimeter under magnification, then move into IC removal, reballing, and reassembly with your reballing kits and soldering tools in reach. Technicians who start with a basic fixed stand often upgrade to a swing arm like this one once board work becomes daily, because the reach and rotation open up angles a fixed pillar cannot. Browse the Microscopes category to match the optics to this stand, and add PCB holders, hot air stations, and soldering stations to complete a full inspection and rework bench. Whether you handle a hang on logo case or a network issue traced to an RF section, a stand that places the optics exactly where you need them keeps the repair moving and cuts rework and return visits.

Additional information
Weight2.0 kg
Q & A
Please login to post questions

Key Features

  • 360-degree rotation to park the microscope away from the work zone
  • Up and down adjustment for focus distance
  • Forward and backward movement to reach the target area
  • Alloy structure built for durability
  • Steady positioning for high-precision work
  • Swing arm design that frees bench space
  • Fits most professional microscopes
  • Ships as 1 x arm stand

Specifications

BrandRF4
ModelRF-FO26
CategoryMicroscope Arm Stand (Microscope Accessories)
CompatibilityMost professional microscopes used in electronics and mobile phone repair
Technology360-degree rotating swing arm with up/down and forward/backward adjustment
MaterialAlloy structure

Common Repair Uses

  • Microscope positioning during board-level inspection and rework.
  • Inspecting charging ICs and charging port areas after repair
  • CPU and BGA reballing inspection
  • IC removal and replacement under magnification
  • Micro-soldering on small pads and traces
  • Checking flex and display connector pins for damage
  • Tracing hardware faults on dead phones
  • Post-rework joint inspection before reassembly
  • Clearing the bench quickly between inspection and hot air work

Compatible Devices

  • Universal microscope accessory. It holds repair microscopes, so it works with any phone brand you repair under the microscope. Compatibility depends on your microscope head, not the phone.
  • Most professional stereo microscopes used in mobile phone repair
  • Microscopes used for PCB inspection and micro-soldering
  • Welding and rework microscopes used at mobile repair benches
  • Standard microscope setups used in electronics repair
  • Microscopes used for precision soldering work
  • Repair-shop microscope stations that need a movable arm in place of a fixed pillar

FAQ

What is the product name?
The product name is RF4 RF-FO26 360-Degree Rotating Arm Stand.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-FO26.
What is this product used for?
This product holds and positions a repair microscope over the work area during mobile phone and PCB repair.
Which devices are compatible with this product?
This product is a microscope accessory, so it works with any phone brand you repair under the microscope. It holds most professional microscopes used in electronics repair.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which movements does the RF-FO26 microscope arm stand support?
It supports up and down adjustment, forward and backward movement, and 360-degree rotation.
Does the RF4 RF-FO26 include a microscope, and will it fit my microscope?
No, the package contains one arm stand only. Supplier listings describe it as compatible with most professional microscopes, so check your microscope head’s mounting size against the stand before you order.