Mechanic TP01 Dispenser Bottle – ESD Alcohol Pump Bottle
₨ 350
Mechanic TP01 ESD Pump Bottle
The Mechanic TP01 Dispenser Bottle gives you a controlled, static-safe way to apply IPA, flux cleaner or thinner on your repair bench. A one-touch pump releases a measured amount onto your wipe or swab, so you stop pouring, dripping and wasting alcohol. The anti-static HDPE body sits safely beside exposed boards, soldering stations and hot air stations. Use it for PCB cleaning after rework, flux residue removal, stencil wiping and screen prep before reassembly. Repair shops and service centers across Pakistan rely on this compact bench accessory because it keeps cleaning fast, tidy and consistent from the first board of the day to the last.
In stock
ESD Alcohol Dispenser Bottle for Daily PCB Cleaning
The Mechanic TP01 Dispenser Bottle is an ESD alcohol dispenser bottle for technicians who clean boards all day and cannot risk static near a live repair. It holds isopropyl alcohol (IPA), flux cleaner or thinner and releases a measured amount through a one-touch pump, so you wet a wipe or swab without tilting, pouring or unscrewing a cap. Mechanic builds the TP01 as a bench accessory for phone and PCB cleaning, and it fits the daily routine of any mobile repair workshop in Pakistan that handles board-level work.
How the One-Touch Pump Controls Your Liquid
Pouring alcohol from an open bottle wastes liquid and drips onto your bench mat, your microscope stage and the next board in the queue. The TP01 replaces that habit with a pump top. You press once, the liquid wicks onto the wipe, and you release. One hand stays on the board holder while the other works the wipe or brush, which speeds up repeated cleaning passes. The closed pump also limits evaporation, so your IPA keeps its strength longer between refills, and the anti-backflow design keeps liquid from creeping back through the nozzle after each press.
Technicians who chase boot loop and hang on logo faults often open and clean the same board several times in one day. Each cycle needs only a few drops, and the pump delivers that dose every time instead of a splash.
ESD-Safe Construction Near Sensitive Boards
Static discharge damages ICs without any visible sign. When you handle a dead phone with a charging issue, a plastic bottle that holds charge adds risk you do not need. The TP01 uses anti-static, ESD-protective HDPE, so the bottle can sit beside your soldering station, hot air station and exposed boards without acting as a static source. Pair it with an ESD mat and a wrist strap and you cover the liquid-handling side of your protection plan. HDPE also stands up to everyday bench solvents such as IPA, so the body keeps its shape through daily refills. Label the bottle with its contents so nobody on your team confuses IPA with flux remover.
Where the TP01 Fits in Your Rework Workflow
Cleaning sits at both ends of board-level work. Before a repair, you clear flux residue, glue and dust from the board so you can read component markings and spot corrosion from a hardware fault or liquid damage. After an IC change, a connector swap or reballing, you wipe the flux off the pads so your microscope shows clean joints during inspection. A clean pad also helps solder wet evenly, which cuts rework time on your next attempt.
The TP01 handles both jobs with the same pump. Use it for PCB cleaning after rework, stencil wiping with lint-free wipes, and screen or camera-glass prep before reassembly. Build the full bench around it with hot air stations and soldering stations for rework, a microscope for inspection, PCB holders to steady the board and a reballing kit for BGA work.
Capacity and cap style vary between TP01 batches in the market, so confirm the size you want before you order for a service center. Shops with several benches usually keep one TP01 per station and a separate labeled bottle for each liquid, so IPA and flux cleaner never mix. As your cleaning setup grows, multimeters and test boxes complete the diagnostic side of the same bench. Mechanicpk stocks the TP01 alongside these categories, so you can build a full workstation in one order.
| Weight | 0.2 kg |
|---|
Key Features
- ✓One-touch pump releases a measured amount of liquid per press
- ✓Anti-static, ESD-protective HDPE body for use beside exposed boards
- ✓Anti-backflow design keeps liquid out of the nozzle after each press
- ✓Suits IPA, flux cleaner, thinner and similar cleaning liquids
- ✓Closed pump limits evaporation between uses
- ✓Hands-free dosing: one hand stays on the board holder
- ✓Compact bench size that fits next to soldering and hot air stations
- ✓Refillable body for daily workshop use
Specifications
| Brand | Mechanic |
|---|---|
| Model | TP01 |
| Category | Mobile Repair Accessories – Cleaning and Liquid Dispensers |
| Compatibility | Universal – not device-specific |
| Supported Devices | Universal – not device-specific |
| Technology | One-touch pump dispensing with anti-backflow design, ESD-safe construction |
| Material | Anti-static (ESD-protective) HDPE |
Common Repair Uses
- ✓PCB cleaning after rework or reflow
- ✓Flux residue removal after IC change
- ✓Cleaning pads before reballing
- ✓Stencil wiping between reballing jobs
- ✓Removing dust, glue and grime before board inspection
- ✓Cleaning corrosion traces after liquid damage
- ✓Screen and camera-glass prep before reassembly
- ✓Cleaning charging port and connector areas
Compatible Devices
- ✓Universal bench accessory – works with any liquid-compatible cleaning task, not tied to specific phone models
- ✓Android smartphone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno and other brands)
- ✓iPhone logic boards and sub-boards
- ✓Tablet and laptop PCBs
- ✓Charging port and connector pads
- ✓Phone screens and camera glass (with lint-free wipes)
- ✓BGA IC pads after reballing
- ✓Stencils and reballing fixtures
- ✓General electronics repair benches and lab kits
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Mechanic TP01 ESD safe to use near exposed PCBs?
Can I use the TP01 for IPA and flux cleaner after IC reballing?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



