2UUL DA12 MicroFix Hook – PCB Underfill Removal Blade Set
₨ 1,699
2UUL DA12 MicroFix Hook Blade Set
The 2UUL DA12 MicroFix hook is a PCB underfill removal tool built around an ultralight carbon fiber handle and three hand-forged blades. You use it to pry, scrape, and clean cured adhesive around CPU packages, BGA ICs, diodes, and other small components on smartphone logic boards. The blades reach narrow gaps between components, so you clear underfill and glue residue before IC change karna, reballing, or pad cleaning. The lightweight handle keeps your hand steady during long board-level sessions. Mechanicpk stocks the DA12 for technicians and service centers across Pakistan who need a precise, universal cleaning blade set at the repair bench.
In stock
2UUL DA12 MicroFix Hook for Precise Underfill and IC Glue Removal
The 2UUL DA12 MicroFix hook gives board-level technicians a dedicated blade set for one of the slowest steps in chip-off repair: clearing cured underfill and adhesive from around ICs. 2UUL pairs a carbon fiber handle with three hand-forged blades, and the geometry targets narrow gaps where generic scrapers and picks fail. If you separate CPU, eMMC, or power ICs on a regular basis, this PCB underfill removal tool replaces improvised blades with a purpose-built set.
Blade Design and Handle Construction
2UUL forges each blade by hand and rates the metal for high ductility, so the tip holds its shape under prying pressure instead of snapping. The three blades give you different edge profiles for lifting, scraping, and cleaning, so you pick the shape that fits the gap in front of you. The carbon fiber handle stays ultralight, which cuts hand fatigue and gives you finer control when you work under a microscope. A light handle also lets you feel the resistance of the adhesive, so you stop before you stress a pad or lift a trace.
Where the DA12 Fits in a Board-Level Repair Workflow
Underfill and corner glue sit between a hot air station and a clean reball. You soften the adhesive with controlled heat from your hot air station or preheater, then use the DA12 to pry and scrape around the chip edge. After the chip comes off, the same blades clean residue from the pads and the surrounding PCB so your stencil sits flat and your solder joints form cleanly. That sequence matters on dead phone cases, hardware fault diagnosis, and any repair that ends with reballing a CPU or storage IC. Pair the blade set with a PCB holder for stability, a microscope for depth control, and a quality soldering station for the rework that follows.
Universal Use Across Phone Boards
The DA12 is not tied to one brand or chipset family. The tool works on any board where underfill, edge glue, or sealant surrounds a component, so it serves iPhone, Samsung, Oppo, Vivo, Infinix, and Tecno boards equally in the sense that the blades act on the adhesive, not on the device. Technicians also use it for diodes, small ICs, and other miniature components that need gentle separation before replacement. Because the set includes three blades, you keep a spare edge ready and swap quickly when one blade dulls. 2UUL also sells BL01 replacement MicroFix blades in a four-piece set, which extends the life of the handle.
Why Technicians Pick This Set for Daily Bench Work
Repair shops that handle volume want consistent results at a fair cost per job. The DA12 delivers a controlled, repeatable cleaning step that protects pads and reduces rework after IC change karna. The compact handle fits a standard tool tray, and the blades slide into tight corners that larger scrapers cannot enter. If you run a service center or train junior technicians, the set also teaches proper underfill handling: heat first, lift gently, and clean the pad before you tin it.
| Weight | 0.1 kg |
|---|
Key Features
- ✓3 interchangeable hand-forged blades included in one set
- ✓Ultralight carbon fiber handle for steady control
- ✓High-ductility blade metal resists snapping under pry pressure
- ✓Narrow blade profiles reach tight gaps between components
- ✓Suits underfill removal, glue scraping, and pad cleaning
- ✓Universal use across phone and electronics PCBs
- ✓Compact size fits standard tool trays and microscope work
- ✓Replacement BL01 MicroFix blades available separately from 2UUL
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA12 |
| Category | PCB Repair Tool / Underfill Removal Blade Set |
| Compatibility | Universal |
| Technology | Hand-forged blades with ultralight carbon fiber handle |
| Material | Carbon fiber handle |
Common Repair Uses
- ✓Underfill removal, adhesive scraping, and pad cleaning before and after chip replacement
- ✓Prying CPU chips after heating
- ✓Removing underfill around BGA ICs
- ✓Scraping IC edge glue
- ✓Cleaning PCB pads before reballing
- ✓Preparing boards for IC replacement
- ✓Clearing glue residue in narrow gaps
- ✓Separating small components such as diodes
- ✓Smartphone motherboard repair on dead phone and hardware fault jobs
Compatible Devices
- ✓Universal underfill and adhesive removal tool — works on any phone or electronics PCB with glued or underfilled components
- ✓Smartphone logic boards (iPhone and Android)
- ✓CPU and SoC packages
- ✓BGA ICs
- ✓eMMC and storage ICs
- ✓Power management ICs
- ✓Diodes and small surface-mount components
- ✓Tablet motherboards
- ✓General electronics PCBs with adhesive-sealed chips
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many blades come with the 2UUL DA12 and can I replace them?
Do I need to heat the board before using the DA12 on underfill?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



