2UUL DA16 Model X Hand Finish Blades 4Pcs (No Handle)
₨ 1,200
2UUL DA16 Model X Edge Glue Blades
The 2UUL DA16 Model X blades give your bench a dedicated edge glue removal tool in a four-blade refill pack. Each blade uses double-sided uniform trimming and a bent-blade design that reduces damage to the motherboard, chip and screen. The tip measures 0.06 mm, so it enters tight gaps around CPUs, screen ICs and small parts on phone boards. A nano-coating protects the flexible, thin and elastic blade body against rust. The pack ships without a handle, so you pair it with your existing 2UUL hand finish handle. Mechanicpk supplies these hand finish blades for mobile repair Pakistan shops, service centers and independent technicians.
In stock
2UUL DA16 Model X Blades for Precise Edge Glue Removal
The 2UUL DA16 Model X blades give your repair bench a dedicated edge glue removal tool in a four-blade refill pack. 2UUL builds Model X for work around CPUs, screen ICs, chips and small parts on phone motherboards, where a wrong angle lifts pads and a thick blade jams in tight gaps. If you already run the 2UUL Hand Finish S-E-X-Y system, this pack restocks your Model X edges without the cost of another handle. If you do IC change karna jobs every day, a fresh edge keeps every cut controlled.
Blade Geometry and Technical Highlights
Every DA16 blade uses double-sided uniform trimming, which 2UUL covers under a utility model patent. The body tapers from thin to thick, so pressure spreads evenly along the edge instead of concentrating at one point. The tip measures 0.06 mm and the tail measures about 0.3 mm. The thin leading edge slides into the gap between a chip and the board, and the thicker tail gives you leverage to push through. 2UUL also bends the blade, an upgrade over flat designs, to reduce damage to the motherboard, chip and screen and to improve your repair yield. A nano-coating protects the blade against rust. The body stays flexible, thin and elastic, so it follows the surface you work on instead of digging into it.
2UUL DA16 Model X Blades in Your Repair Workflow
The 2UUL S-E-X-Y range splits the glue and lift work into four blade types. Model S separates the CPU and Nand flash. Model E removes glue from the board, IC and CPU. Model X handles professional edge glue removal. Model Y cuts black underfill glue without hurting the motherboard. Reach for Model X when you need to clear glue along the edges of a chip or screen part before you lift it.
The stated Model X scope covers glue removal from screens, CPU and screen IC removal, and lifting small parts such as separators and chips. On a typical hardware fault job, you pre-heat the area with your hot air station, hold the board in a PCB holder and work under your microscope. Then you run the Model X edge along the glue line with light, steady pressure. After the part lifts, you clean the pads and move to your reballing kit. The blade rests between your soldering station and your microscope in the workflow, and it saves time when glue blocks the next step.
Refill Pack Details for Shop Owners
The DA16 pack contains four Model X blades and no handle. Confirm that you own a 2UUL hand finish handle before you order, because the handle does not come in this box. Workshops with several technicians usually keep one handle per bench and stock refill packs in bulk, so nobody waits for a replacement edge mid-job.
Mechanicpk supplies the 2UUL DA16 pack to repair shops and service centers across Pakistan, alongside soldering stations, microscopes, reballing kits and hot air stations.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Four Model X blades per pack
- ✓Sold without a handle as a refill pack
- ✓Double-sided uniform trimming with utility model patent
- ✓Thin-to-thick blade body for even force
- ✓Bent-blade design reduces damage to board, chip and screen
- ✓0.06 mm tip and about 0.3 mm tail
- ✓Nano-coating protects against rust
- ✓Flexible, thin, elastic blade body
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA16 (Model X), 4 blades per pack, without handle |
| Category | Glue Removal Blades / Cutting and Prying Tools |
| Compatibility | Refill blades for the 2UUL Hand Finish S-E-X-Y blade series |
| Technology | Double-sided uniform trimming (utility model patent), bent-blade design, nano-coating |
| Dimensions | Blade thickness 0.06 mm at the tip, about 0.3 mm at the tail |
Common Repair Uses
- ✓Edge glue removal and part lifting on phone boards and screens
- ✓Edge glue removal around chips and ICs
- ✓CPU removal
- ✓Screen IC removal
- ✓Glue removal from screens
- ✓Lifting small parts such as separators and chips
- ✓IC change karna prep work
- ✓Hardware fault board teardown
- ✓Pad cleanup prep before reballing
Compatible Devices
- ✓Universal, not device-specific. Works on phone motherboards, ICs, CPUs and screens that need edge glue removal
- ✓Mobile phone motherboards
- ✓CPU packages on phone boards
- ✓Screen ICs
- ✓Screen assemblies needing glue removal
- ✓Separators and other small board parts
- ✓Chips and ICs glued at the edges
- ✓Phone PCBs across brands (universal, not device-specific)
- ✓2UUL Hand Finish S-E-X-Y handle system (refill)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the 2UUL DA16 pack include a handle?
What is the difference between 2UUL Model X and Model S, E and Y blades?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



