2UUL DA32 Phone Mic Protective Sticker 500 Pcs

₨ 800

Phone Mic Protective Sticker for Repair Benches

The 2UUL DA32 is a phone mic protective sticker that ships as a 500-piece pack of ultra-thin 4 × 6 × 0.03 mm patches. You cover the microphone port with one patch while you solder, heat or clean a board. The patch resists heat up to 300°C, blocks dust and water, and peels away without sticky residue. Because the film is so thin, it does not alter sound pickup after reassembly. It suits smartphones, tablets, laptops and other devices with a microphone, so one pack serves your whole counter. Mechanicpk supplies the DA32 to Pakistani technicians, repair shops and service centers that want clean, consistent mic protection on every job.

In stock

17 People watching this product now!
Description

Phone Mic Protective Sticker for Repair Benches

A phone mic protective sticker looks like a minor consumable, yet it decides whether a repaired handset leaves your bench with a clean microphone or comes back with a muffled-voice complaint. The 2UUL DA32 gives your workshop a 500-piece pack of ultra-thin patches that cover the mic port while you solder, heat, clean or reassemble the board. Each patch measures about 4 × 6 × 0.03 mm, so it sits over the port without adding bulk. 2UUL rates the patch for heat up to 300°C and builds the adhesive to lift away without sticky residue. Mechanicpk stocks the DA32 for Pakistani repair shops that run high daily volumes and want one dependable cover for every job.

Technical Highlights of the DA32 Mic Sticker

The DA32 uses a thin film format instead of a mesh or foam plug. At 0.03 mm thick, the patch adds almost nothing around the mic opening, and the manufacturer designs it so it does not alter sound pickup once the phone returns to service. The pack lists dustproof and waterproof protection, which matters when you open a handset that already carries pocket lint, flux fumes or liquid exposure. The 300°C rating gives you headroom when your hot air station works near the mic area, and the residue-free adhesive spares you from scraping or wiping with solvent that could push dirt into a tiny port. The 500-piece count suits a bench that handles charging issue and display problem jobs every day, because both repairs expose the bottom mic area.

You get a measured, repeatable cover instead of improvising with tape. Tape leaves glue, softens under heat and often covers more area than the port needs. A pre-cut patch removes that guesswork and keeps your finished work clean.

Where the DA32 Fits in Your Repair Workflow

Place the sticker over the mic port before any job that sends heat, flux, dust or liquid toward the opening. During board-level work, you cover the port, run your hot air station and soldering station, and clean the surrounding area with alcohol without worrying about splatter reaching the mic. After liquid damage cleaning, the patch keeps moisture out of the port while you dry and test the board.

Under your microscope, you press the patch flat with tweezers, then secure the board in a PCB holder for the next step. Technicians who also run reballing kits and multimeters on the same bench keep the pack within reach, so covering the port becomes part of the routine before the first heat cycle. Shops that handle hardware fault repairs on handsets, tablets and laptops use the same patch across all of them, since the DA32 follows a universal approach instead of targeting one model.

The patch also helps after the repair. When you close a phone and hand it back, a cover that stays clean through reassembly reduces the chance of a customer calling to say the other side cannot hear them. That call costs you more time than the repair deserves.

Why Technicians Buy the DA32 in Bulk

Repair shops lose more time to repeat visits than to the repair itself. A bulk pack of 500 patches means you never skip the protection step because the box ran empty. The compact pack, which measures 87 × 150 × 8.5 mm and weighs about 19 g, fits in a bench drawer or a tool tray without taking space from your more expensive gear.

The DA32 suits smartphones, tablets, laptops, desktop computers and other devices with a microphone. If you service across those categories, one pack covers your whole counter. Pair it with your hot air station, soldering station and microscope, and you build a bench setup where every consumable has a clear job.

Mechanicpk supplies the 2UUL DA32 phone mic protective sticker to technicians, repair shops and service centers across Pakistan. Order it alongside your other repair accessories to keep your protective supplies stocked in one purchase.

Additional information
Weight0.20 kg
Q & A
Please login to post questions

Key Features

  • 500 pre-cut patches per pack for high-volume repair shops
  • Ultra-thin 0.03 mm film that does not alter mic sound pickup
  • Approx. 4 × 6 mm size that fits over a standard mic port
  • Heat resistant up to 300°C for use near soldering or hot air work
  • Residue-free adhesive that peels away cleanly
  • Dustproof and waterproof protection for the mic opening
  • Universal use across smartphones, tablets, laptops and other microphone devices
  • Compact pack at 87 × 150 × 8.5 mm and about 19 g

Specifications

Brand2UUL
ModelDA32
CategoryMobile Repair Accessories – Protective Stickers
CompatibilityUniversal – devices with a microphone (not device-specific)
Pack Quantity500 pcs per pack
Heat ResistanceUp to 300°C
DimensionsSticker approx. 4 × 6 × 0.03 mm; pack 87 × 150 × 8.5 mm
Weight19 g (gross, per pack)

Common Repair Uses

  • Microphone protection during and after handset repair
  • Covering the mic port during hot air rework
  • Shielding the mic opening while soldering nearby components
  • Keeping flux and dust out of the mic port during board cleaning
  • Blocking moisture from the mic port after liquid damage cleaning
  • Protecting the microphone after reassembly in a repair shop

Compatible Devices

  • Universal microphone-port cover, not tied to specific phone models
  • Smartphones
  • Tablets
  • Laptops
  • Desktop computers
  • Other electronic devices with a microphone

FAQ

What is the product name?
The product name is 2UUL DA32 Phone Mic Protective Sticker.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA32.
What is this product used for?
This product is used for protecting a phone microphone port from dust, moisture and heat during and after repair.
Which devices are compatible with this product?
This product suits smartphones, tablets, laptops, desktop computers and other devices with a microphone. It is universal and not tied to specific models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the 2UUL DA32 mic sticker stay on during hot air or soldering work?
Yes. The DA32 is rated for heat up to 300°C, so it stays in place when you work near the mic area with a hot air station or soldering iron.
Does the DA32 sticker leave residue or block the microphone?
The adhesive is residue-free and peels away cleanly. The patch is only 0.03 mm thick and is designed not to alter sound pickup.