2UUL DA46 Mr. Glue Max 60ml White Frame Adhesive
₨ 650
2UUL Mr. Glue Max 60ml White Adhesive
The 2UUL Mr. Glue Max 60ml (DA46, white) gives your repair bench a quick-drying, high-strength adhesive for mobile phone frame and housing work. You apply it straight from the tube to refit back covers, middle frames, LCD frames and touch screen assemblies. The 60ml volume lasts through far more jobs than the 25ml tubes in the same 2UUL Mr. Glue range. A white bead blends into light-coloured frames, and the same tube also handles bonding on toys and small electronic products. Mechanicpk supplies it to Pakistani repair shops and technicians.
In stock
2UUL Mr. Glue Max 60ml for Phone Frame and Back Cover Repair
The 2UUL Mr. Glue Max 60ml in white, model DA46, gives your bench a fast-drying adhesive built for mobile phone housing work. When a back cover, middle frame or LCD frame needs a fresh bond, this tube delivers the adhesive in a controlled bead. The 60ml volume outlasts the 25ml DA41 and DA42 tubes in the same 2UUL Mr. Glue range, so a busy shop refills less often. Mechanicpk stocks it for technicians who want a dependable mobile phone frame adhesive without moving to a specialty system.
What the DA46 Adhesive Brings to the Bench
2UUL positions the Mr. Glue Max range as quick-drying, high-strength adhesive for mobile phone maintenance. Distributor listings describe the DA46 as a frame-bonding adhesive that leaves no trace, which matches the clean seam you want when a customer’s phone goes back out the door. The white colour keeps the bead unobtrusive along light-coloured frames and housings, where a dark adhesive would show at the edge. Tube dispensing lets you lay a thin, even line instead of flooding the channel, and that control matters when you align a back glass or a screen frame on a tight chassis. Test-fit the part dry, apply the bead, press the part into place, and give the bond time to set before you handle the phone.
Where It Fits in Your Repair Workflow
Most frame and cover jobs follow the same sequence. You warm the glass or frame with a hot air station or heater, separate the part, scrape out the old adhesive, and clean the seat. A microscope helps you check the channel for leftover residue before you lay the new bead. The DA46 enters at the refit stage, after the hardware fault is fixed. That might be a charging issue repair, a display problem fix, or a board-level job where you changed an IC and closed the phone again. A PCB holder keeps the chassis steady while you work, and the tube lets you finish the bond in one pass. Because this glue is a general-purpose product, you also reach for it on toys and small electronic products that come into the shop.
Why Technicians Pick the 60ml DA46 Size
Volume decides cost per job in a shop that closes phones all day, and the 60ml tube gives you plenty of material per purchase. 2UUL sells the same capacity in black as the DA45, so you can stock both colours and match the bead to the phone in front of you. Each order ships as one DA46 tube in white. Keep the cap tight between jobs, store the tube upright, and wipe the nozzle before you close it so the next bead flows cleanly. For a workshop that handles frame and back cover repairs daily, this tube covers a long run of refits with consistent results.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Quick-drying adhesive formula
- ✓High-strength bond for phone repair work
- ✓Large 60ml tube volume
- ✓White colour for light-coloured frames
- ✓Tube dispensing for controlled bead application
- ✓Frame bonding that leaves no trace
- ✓Multipurpose use on phones, toys and small electronics
- ✓Model DA46 in the 2UUL Mr. Glue range
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA46 (Mr. Glue Max) |
| Category | Adhesives & Glue |
| Compatibility | Mobile phone frames, back covers, middle frames, LCD screen frames, and touch screen assemblies |
| Supported Devices | Universal — not device-specific |
| Colour | White |
| Volume | 60ml |
| Packaging | Tube |
Common Repair Uses
- ✓Frame, cover and screen bonding in mobile phone repair
- ✓Back cover refitting after glass replacement
- ✓Middle frame bonding
- ✓LCD frame bonding after screen service
- ✓Touch screen assembly bonding
- ✓Housing repair and re-sealing
- ✓Closing the phone after charging issue repair
- ✓Closing the phone after IC change and board repair
- ✓Toy and small electronics repair
Compatible Devices
- ✓Universal — not device-specific; suited to general mobile phone frame, cover and screen bonding
- ✓Mobile phone back covers and rear glass
- ✓Mobile phone middle frames
- ✓Mobile phone housings
- ✓LCD screen frames
- ✓Touch screen assemblies
- ✓Toys
- ✓Small electronic products
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is 2UUL DA46 Mr. Glue Max suitable for mobile phone back cover and middle frame bonding?
What is the difference between 2UUL DA45 and DA46 Mr. Glue Max?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



