Back to products
RF4 RF-R6B Diagonal Air Gun Nozzle Set
RF4 RF-R6B Diagonal Air Gun Nozzle Set 6-Piece Original price was: ₨ 2,500.Current price is: ₨ 1,900.

Relife TB1 50mL Bottle With Needle | Antistatic Solvent

₨ 300

Antistatic Solvent Bottle with Needle

The Relife TB1 50mL Bottle With Needle is an antistatic solvent bottle with needle built for controlled liquid dosing on the repair bench. A double-cap design and threaded mouth seal the contents, and the removable stainless steel needle lets you place isopropyl alcohol, flux, or board cleaning solution exactly where the job needs it. The thickened plastic body resists deformation under repeated squeezing, and the raised bottom reduces the chance of bursting. Mechanicpk supplies the TB1 for technicians, repair shops, and service centers in Pakistan who clean PCBs, apply flux to joints, and keep liquids organized without spills.

In stock

12 People watching this product now!
Description

Relife TB1 50mL Bottle With Needle for Precision Solvent Dosing

The Relife TB1 50mL Bottle With Needle is an antistatic solvent bottle with needle that gives your repair bench controlled, drop-by-drop liquid delivery. It holds 50mL of isopropyl alcohol, liquid flux, or board cleaning solution and pairs that capacity with a removable stainless steel needle, so you dispense onto a joint, a connector, or a swab instead of pouring. Relife built the TB1 around the daily habits of a phone repair workshop: small volumes, frequent refills, and liquids that evaporate or spill when they sit in open containers. If your bench handles dead phone boards, charging issue repairs, and hardware fault diagnosis every day, a dedicated dosing bottle removes a small but constant source of mess and wasted solvent.

Antistatic Body and Sealed Construction

Board-level work puts sensitive components under your tools, so the TB1 uses an antistatic plastic body instead of a generic bottle. That matters whenever a liquid applicator comes close to exposed PCB pads, ICs, and connectors. The double-cap design adds a second layer of closure over the needle, and the threaded bottle mouth screws shut with clear thread lines, so you can invert the bottle without leaks. A tight seal also slows evaporation, which protects the alcohol or flux you load between jobs. Relife thickened the plastic wall and raised the base of the bottle to reduce pressure stress, so the bottle resists bursting when you fill it. The ergonomic body keeps its shape after repeated squeezing, and dosing stays predictable from the first fill to the last. Relife offers the TB1 in two colors, blue and yellow, which helps you separate liquids on a busy bench.

Needle Dosing in the Repair Workflow

The stainless steel needle plugs onto the bottle mouth, and you can swap it when a tip clogs or bends. Squeeze gently and the needle places a controlled drop, so you cover a single IC edge, a charging port solder joint, or a patch of flux residue without flooding the surrounding board. In a typical workflow, you apply flux before a hot air station pass, clean residue with isopropyl alcohol after soldering, and wet the area again before you inspect it under a microscope. The TB1 supports each of those steps with one tool format. Technicians who run an ISP pinout job, reflow an eMMC, or fit a UFS adapter also clean flux off pads before and after the operation, and a needle bottle gives that cleaning step the same precision as the soldering work itself. Many shops keep one TB1 filled with alcohol and a second filled with flux, which prevents cross-contamination and keeps every pass clean.

Choosing the TB1 for Your Bench

The TB1 suits shops that want one consistent dispensing format across the whole station. Pair it with soldering stations, hot air stations, test boxes, multimeters, microscopes, reballing kits, and PCB holders from the Mechanicpk range, and you build a board-repair setup where every liquid stays controlled. Fill it only with liquids you have confirmed as compatible with plastic, and check the label of any aggressive solvent before you load it. Label each bottle by content when you run several, because the needle tips look identical. At 50mL, the bottle stays small enough for one-handed use and light enough to move between stations. The size also suits a service center that issues one bottle per technician bench, because refills stay quick and a single bottle lasts through many board cleaning jobs. Buyers who stock a repair counter in Pakistan get a low-cost consumable accessory that every technician uses daily, from display problem jobs to network issue board work, and it pairs naturally with the cleaning liquids they already buy. Shops that move from basic board cleaning into volume reballing or mask and glue work usually add syringe-based dispensing next, and the TB1 stays useful as the everyday solvent bottle beside it.

Additional information
Weight0.8 kg
Q & A
Please login to post questions

Key Features

  • Antistatic plastic body for electronics repair benches
  • Double-cap design for strong sealing
  • Removable stainless steel needle for precise dosing
  • Threaded bottle mouth that opens and closes easily and seals without leaks when inverted
  • Thickened, recyclable plastic material
  • Streamlined ergonomic body that keeps its shape after repeated squeezing
  • Raised bottle base to reduce bursting when you fill it
  • 50mL capacity in blue or yellow

Specifications

BrandRelife
ModelTB1
CategorySolvent Bottle / Liquid Dispenser (Repair Consumables)
CompatibilityLiquid solvents, alcohol, and flux (universal — not device-specific)
TechnologyAntistatic plastic body, double-cap seal, removable needle
MaterialPlastic body with stainless steel needle
Capacity50mL

Common Repair Uses

  • Dispensing alcohol, flux, and cleaning liquids during board-level mobile repair.
  • Cleaning flux residue around ICs after soldering
  • Applying liquid flux before hot air rework
  • PCB cleaning after liquid damage work
  • Cleaning charging port and connector pads
  • Wetting a swab or brush with precise alcohol amounts
  • Cleaning pads before and after ISP, eMMC, or UFS operations
  • Pre-cleaning boards before reballing
  • Organizing solvents and flux at the repair bench

Compatible Devices

  • Universal — not device-specific. The TB1 holds and dispenses liquids, so it supports board work on any phone brand or chipset family.
  • Samsung motherboards
  • Oppo and Vivo motherboards
  • Infinix and Tecno motherboards
  • iPhone logic boards
  • Xiaomi and Realme motherboards
  • Qualcomm and MediaTek based boards
  • Tablet and laptop PCBs
  • General electronics PCBs

FAQ

What is the product name?
The product name is Relife TB1 50mL Bottle With Needle.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is TB1.
What is this product used for?
This product is used for dispensing alcohol, flux, and cleaning liquids in precise drops during PCB cleaning and mobile repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It holds liquids for board work on any phone brand or chipset family.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Relife TB1 bottle have a replaceable needle?
Yes. The stainless steel needle is removable and plugs onto the bottle mouth, so you can replace it when it clogs or bends.
Which liquids can I put in the Relife TB1 solvent bottle?
The TB1 suits isopropyl alcohol, liquid flux, and board cleaning solutions used in PCB cleaning. Check that any aggressive solvent is compatible with plastic before you fill the bottle.