RF4 RF-R6B Diagonal Air Gun Nozzle Set 6-Piece
₨ 2,500 Original price was: ₨ 2,500.₨ 1,900Current price is: ₨ 1,900.
RF-R6B Diagonal Air Gun Nozzle Set for Clear-View Rework
The RF4 RF-R6B Diagonal Air Gun Nozzle Set gives your hot air gun a curved, rotating outlet, so you aim heat at a board without hiding the component under the nozzle. The set contains six nozzles, and each one rotates 360° for fine control over airflow direction. The curved body keeps your line of sight open under the microscope, which also helps during teaching sessions and live streaming. RF4 designs the RF-R6B for Quick hot air guns, and distributor listings also pair it with 861DW and 861Pro rework stations. Choose it when straight nozzles block your view during IC removal and board-level rework.
In stock
RF-R6B Diagonal Air Gun Nozzle Set for Clear-View Hot Air Rework
The RF-R6B diagonal air gun nozzle set from RF4 changes one thing on your rework bench: the direction the hot air arrives from. A straight nozzle points down at the board and hides the very component you need to watch. The RF4 RF-R6B Diagonal Air Gun Nozzle Set replaces that vertical outlet with a curved one that rotates through 360°, so you steer the heat from the side and keep the chip, flux and solder in view. The package contains six nozzles. RF4 designs the RF-R6B as an accessory for Quick hot air guns, and distributor listings also pair it with 861DW and 861Pro rework stations. Mechanicpk supplies it to technicians who spend long hours under the microscope on mobile phone boards, and to shop owners who want a clear-view heating option on every bench without replacing the station.
How 360° Rotation Controls Heat Direction
Rotation is the core of this set. You turn each nozzle to point the airflow at the target component and away from its neighbours, which gives you finer temperature control around shields, connectors and plastic parts that sit close to an IC. On a crowded phone motherboard, that directional control matters more than any single nozzle opening. You place the heat on the solder joints you want to flow, and you stop tilting the whole hot air handle into an awkward wrist angle to reach them. You get a steadier wrist during long jobs and a heating angle you can repeat from one board to the next. Pair the nozzles with a hot air station that holds its temperature and airflow settings, and clamp the board in a PCB holder so your chosen angle stays fixed through the job.
Unobstructed View Under the Microscope
The curved body keeps your sight line open. During IC removal you watch the solder turn glossy and release, and a straight barrel often blocks that moment. With the diagonal outlet, your microscope sees the chip while the heat comes in from the side, so you lift the part at the right moment instead of guessing. The same clear view helps repair trainers who demonstrate a rework step to a class, and anyone who records or streams a live repair, because the audience sees what you see. If your bench already runs a microscope for board-level work, this set slots into that setup without changing your routine.
Where It Fits in the Repair Workflow and What to Check Before You Buy
Use the set at the hot air stage of board-level repair: IC removal, reflow and component replacement after you trace a hardware fault with a multimeter or test box. Typical cases include a charging issue that ends in a charging IC swap, a display problem that traces to connector or IC work, and a dead phone with a failed chip on the board. Before you reseat or reball a chip, you clean the pads with your soldering station and a reballing kit, and the nozzle then delivers the heat step. For ISP, eMMC or UFS work on a hang on logo or boot loop case, you still need the correct programmer and adapter. This accessory makes the heating part of that job easier to control, and angle control reduces the guesswork when you work near neighbouring parts. Check compatibility before you order. RF4 names Quick models for the RF-R6B, and distributor listings name the 861DW and 861Pro, so match the set to your station model and confirm with Mechanicpk if your gun is a different one.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Six-nozzle set in one package
- ✓360° flexible rotation for precise airflow direction
- ✓Curved diagonal nozzle design
- ✓Unobstructed view of the component during rework
- ✓Suited to microscope-based board repair
- ✓Works for teaching and live-streaming repair demos
- ✓Installs quickly on a compatible hot air gun
- ✓RF4 designs it for Quick models, with 861DW and 861Pro also listed by distributors
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-R6B |
| Category | Hot Air Gun Nozzle |
| Compatibility | Hot air gun rework stations. RF4 specifies Quick models, and distributor listings also name 861DW and 861Pro |
| Technology | Curved diagonal nozzle with 360° rotation |
| Package Contents | 6 x air gun nozzles |
Common Repair Uses
- ✓Hot air steps in board-level mobile repair
- ✓IC removal and replacement on phone motherboards
- ✓Reflow of chips while watching the solder under a microscope
- ✓Charging IC replacement on charging issue boards
- ✓Connector and component rework on display problem boards
- ✓Chip lifting on dead phone boards with a failed IC
- ✓Heating a chip before reseating or reballing
- ✓Rework near shields and neighbouring parts, where side airflow gives more control
- ✓Repair training demos and live-stream rework sessions
Compatible Devices
- ✓Hot air gun rework stations, scope as verified from RF4 and distributor listings (the set fits stations, not phone models)
- ✓Quick-series hot air guns (RF4 manufacturer scope)
- ✓861DW hot air gun rework station (distributor listing)
- ✓861Pro hot air gun rework station (distributor listing)
- ✓Hot air rework benches used for mobile phone board repair
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which hot air guns does the RF-R6B nozzle set fit?
Does the RF-R6B nozzle rotate, and how does it help during IC removal?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



