RELIFE RL-066A Back Glass Blasting Pen for iPhone & Huawei
₨ 1
RL-066A Back Glass Blasting Pen for Rear Glass Removal
The RELIFE RL-066A back glass blasting pen gives your repair bench a controlled way to separate rear glass from the frame on iPhone 8 through iPhone 14 Pro Max and Huawei P and Mate series phones. Its tungsten steel tip delivers adjustable impact, and a rotating rear section lets you match the force to each model so the back cover stays intact. The sandblasted body provides a secure grip during long sessions, while a protective cap covers the tip when the pen is idle. The package contains one pen, a focused tool for the glass separation stage of a back cover repair.
Out of stock
Back Glass Blasting Pen RL-066A for Controlled Rear Glass Removal
The back glass blasting pen RL-066A is a manual hand tool that separates rear glass from the frame of iPhone and Huawei handsets, giving your repair bench a controlled alternative to heat-based removal. Instead of relying on heat, the tip delivers a series of focused impacts along the glass edge, which breaks down the adhesive while the rest of the body stays intact. On your bench, the rear glass comes away cleanly once the impact force matches the model in your hand, so matching the setting is always the first step. The tool sits early in the back cover workflow, before you move on to the camera lens module, the housing assembly, or any board-level work. It suits technicians handling rear glass swaps, where the frame paint and the wireless charging coil must remain undamaged. This guide covers the design, the verified compatibility scope, and the adjustment method that protects the back cover during removal, so you can apply the pen with confidence on every job.
Adjustable Impact Force for Each Phone Model
The strike force of this back glass blasting pen is not fixed, because the rear section rotates to change the impact level for each model. You set a lighter force for smaller or more delicate covers and a stronger setting for glass that sits firmly in the frame. With the RL-066A blasting pen, start at the lowest setting, make a few light strikes along one edge, and increase only when the glass has not released. Working up from a gentle setting protects the glass from cracking mid-removal and keeps the frame paint around the edge in good condition. Each phone family can need a different setting, so check the force on a practice unit when you switch between iPhone and Huawei work. Test the chosen setting on a practice unit before you work on a customer device, especially when you handle a model for the first time at your bench.
Tungsten Steel Tip and Sandblasted Grip
The tungsten steel tip, hand-polished for precision, gives you the hardness needed for repeated impacts along rear glass edges. The sandblasted body adds friction, so your fingers stay secure through a long session at the bench. Smooth corners and an ergonomic grip reduce hand fatigue when you work through several phones in a single shift. Its compact size fits easily into a tool roll or a drawer, which keeps it within reach on a busy repair bench. When the pen is idle, the protective cap covers the sharp tip and lowers the risk of accidental injury in a crowded workshop. Store the pen with the cap on and keep it separate from loose tools, so the tip stays protected between jobs.
iPhone Back Glass Removal Tool Workflow
Before you strike, remove the parts that sit close to the rear glass and keep the wireless charging coil clear of the tip. Work the tip along one edge at a time, applying light and repeated impacts rather than a single heavy strike that risks cracking the cover. Once the glass releases, lift it free carefully, because the lens module remains bonded within the rear glass assembly. Pair the pen with a stable holder so both hands stay free for controlled strikes and precise tip placement along the edge. Treat the pen as a separation step only, and move on to the housing after the rear glass has come away completely. Following this order keeps each job predictable from start to finish, whether you handle one phone or a full batch.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Adjustable impact force through the rotating rear section
- ✓Tungsten steel tip, hand-polished for precise strikes
- ✓Sandblasted surface for friction and secure grip
- ✓Ergonomic body with smooth corners for comfortable hold
- ✓Protective cap covers the sharp tip when idle
- ✓Compact and portable for mobile repair benches
- ✓Designed for back cover lens module separation
- ✓Supplied as a single blasting pen
Specifications
| Brand | RELIFE |
|---|---|
| Model | RL-066A |
| Category | Mobile Repair Tools, Back Glass Removal |
| Compatibility | iPhone 8 to iPhone 14 Pro Max series, Huawei P and Mate series |
| Supported Devices | Rear glass removal on the verified iPhone and Huawei models above |
| Technology | Adjustable impact force via rotating rear section |
| Material | Tungsten steel tip, sandblasted body |
Common Repair Uses
- ✓Rear glass separation as the first step of a back cover replacement.
- ✓Rear glass removal on iPhone 8 to iPhone 14 Pro Max series before a back glass replacement
- ✓Huawei P and Mate series back cover glass removal
- ✓Separating the glass back cover from the camera lens module assembly
- ✓Rear glass removal on other glass-back phones using a light impact setting
Compatible Devices
- ✓Verified scope is iPhone 8 to 14 Pro Max and Huawei P/Mate series rear glass.
- ✓iPhone 8 to iPhone 14 Pro Max series rear glass
- ✓Huawei P series rear glass
- ✓Huawei Mate series rear glass
- ✓Other glass-back mobile phones, with the impact set for each model
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which iPhone models does the RL-066A support?
Does the RL-066A work on Huawei P and Mate series phones?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



