Relife RL-070 Rosin Flux for Tip Cleaning & Soldering
₨ 99
RL-070 Rosin Flux for Tip Cleaning and Clean Solder Joints
The Relife RL-070 is a solid, high-purity rosin flux built for keeping soldering iron tips clean so solder flows where it should. Rub a warm tip across the block and it strips off oxidation, so tin bonds again on your next joint. Technicians use it on mobile phone motherboards, CPU and BGA rework, and general SMT work, where a dull tip causes cold joints and wasted time. The rosin is compact and portable, so it fits on any bench beside your station. It is a surface preparation flux, not a substitute for solder paste.
In stock
Relife RL-070 Rosin Flux for Mobile Repair Workbenches
The RL-070 rosin flux for mobile repair is a solid block of high-purity rosin made for one job on your bench: keeping the soldering iron tip clean and the joint ready for tin. When a tip oxidizes, solder refuses to bond and every pad you touch looks dull. Rubbing the tip across this rosin removes the oxide and lets fresh solder wet the surface again. Technicians working on motherboards, CPUs and BGA chips will recognize the workflow immediately, because this step comes before most tinning and component changes. Relife packages it as a small, portable piece, so it sits beside your station without taking up space. Think of it as the cheapest step that protects your tips and keeps your joints clean.
Keeping Your Soldering Tips Clean Between Joints
A tip that has started to oxidize will not carry heat into the pad properly, and the first symptom is usually solder that balls up instead of spreading. Warm the tip, then touch it to the rosin block and wipe it across the surface until the oxide lifts and the tip takes tin again. Repeat this between joints during a long session, especially after heavy use on a single component. Keep the block dry and clean, since dust or debris stuck to the surface will transfer onto the tip. Once the tip is bright, tin it with fresh solder before you move to the next pad. Regular tip cleaning extends the life of the tip and makes every joint more predictable.
Flux Action on Mobile PCBs and Chip Pins
Rosin flux works by removing oxidation from metal surfaces and reducing surface tension, which helps molten solder spread evenly over pads and component legs. On a phone board, this matters most when you tin the pins of a chip before lifting it, or when you prepare a pad for a new part. Sellers describe the RL-070 as having few impurities and a clean colour, which points to a flux that leaves less debris behind on the board. Apply a small amount to the area, then heat the joint until the solder flows and wets the surface. After the work, clean any remaining residue with isopropyl alcohol so the board stays free of corrosion-prone deposits. Keep in mind that rosin is a flux, not a solder paste, so you still need solder for the actual joint.
Working Practice on Your Repair Bench
Solid rosin is simple to store, but it needs a few habits to stay clean and effective. Keep the block covered when you are not using it, so dust and moisture do not settle on the surface. Use a clean tool or the tip itself to take material from the block, rather than touching it with bare fingers that leave oils behind. Heated rosin produces smoke, so work with a fume extractor or good ventilation, especially during long sessions on CPU and BGA work. Label the block with the product model so you can tell it apart from paste and other flux types on a crowded bench. Consistent habits make the RL-070 a reliable part of your routine.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Solid high-purity rosin block
- ✓Prevents oxidation on soldering iron tips
- ✓Low impurities for cleaner flux action
- ✓Reduces surface tension to help tin flow
- ✓Removes oxidation from tips and pads
- ✓Suitable for mobile phone PCB and CPU work
- ✓Small, portable form for any bench
Specifications
| Brand | Relife |
|---|---|
| Model | RL-070 |
| Category | Soldering Flux |
| Compatibility | Universal, not device-specific |
| Technology | Solid rosin flux |
| Material | High-purity natural rosin |
Common Repair Uses
- ✓Cleaning and tinning soldering iron tips, and preparing pads and chip pins for soldering during board-level repair.
- ✓Cleaning oxidized iron tips before tinning
- ✓Refreshing a tip between joints during IC replacement
- ✓Applying flux to pads before tinning chip legs
- ✓Preparing CPU and BGA pads before reballing or reheating
- ✓Improving tin flow on pins of small SMT parts
- ✓Cleaning tips at the start of a board-level session
- ✓Supporting soldering of connectors on mobile PCBs
- ✓Keeping joints bright and clean for inspection
Compatible Devices
- ✓Universal, not device-specific. Applies to any soldering iron tip or rework bit used on mobile phone PCBs, CPUs and BGA chips.
- ✓Soldering iron tips on standard rework stations (universal, not device-specific)
- ✓Rework bits used on mobile phone motherboards
- ✓CPU and BGA rework tips
- ✓Chip-level soldering irons for SMT components
- ✓Fine-tip irons used for IC pin tinning
- ✓Mobile phone PCB soldering workstations
- ✓General electronics repair irons with replaceable tips
- ✓Tip maintenance on any iron with a replaceable tip
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the RL-070 clean a soldering iron tip?
Is the RL-070 a solder paste or solid rosin?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



