Haina H-7007 180W Die Grinder with Flexible Shaft

₨ 6,000

Haina H-7007 180W Die Grinder with Flexible Shaft

The Haina H-7007 is a corded 180W rotary tool kit for technicians who need control on small parts. It runs on 220–240V supply and reaches a no-load speed of 8000 to 30000 rpm, so you can move from light polishing to faster cutting. The collet accepts bits up to 3.2mm. The flexible shaft lets you work at angles a fixed handpiece cannot reach. It suits shaping, grinding and cleaning small metal components where a larger grinder would remove too much material.

In stock

12 People watching this product now!
Description

Haina H-7007 Die Grinder for Precision Work on the Repair Bench

The Haina H-7007 die grinder gives your repair bench a compact corded rotary tool for detailed work. A 180W motor drives a collet rated for bits up to 3.2mm, which suits polishing and grinding jobs where an angle grinder would remove too much material. Your workflow benefits most when the job needs control rather than raw power. The speed range runs from 8000 to 30000 rpm, so you set a slow speed for delicate surfaces and a faster one for cutting. This tool fits casing trim, small bracket shaping and surface cleaning on phone components.

Power and Speed Range

The unit has a rated input of 180W at 220–240V. No-load speed spans 8000 to 30000 rpm. A lower speed keeps heat down on thin metal, while a higher speed suits cutting. Start at a moderate setting with each new bit and increase only when the material holds its shape. Confirm your supply voltage before connecting, because the rated range covers 220–240V only.

Collet Capacity and Bit Selection

The maximum shank diameter is 3.2mm. Match each bit shank to the collet before tightening. An undersized shank causes wobble and reduces accuracy on fine work. Polishing points and small burrs are the usual choice for phone component work. Replace any bit that shows chatter, because it leaves uneven marks on the surface.

Flexible Shaft Handling at the Bench

The kit includes a flexible shaft, which lets you hold the handpiece like a pen while the motor sits on the bench. Keep the shaft in gentle curves, since sharp bends stress the cable and slow rotation. Let the tool reach full speed before touching the work. Keep your grip light so the bit does the cutting.

Where This Tool Fits in Your Workflow

Use this die grinder for trimming plastic housing edges, shaping small metal brackets, polishing contact surfaces and cleaning oxidation off small parts. It does not replace a soldering station or hot air rework setup, so keep those tools in your workflow for component-level repair.

Additional information
Weight2.0 kg
Q & A
Please login to post questions

Key Features

  • 180W rated input power
  • No-load speed range of 8000–30000 rpm
  • 3.2mm maximum collet capacity
  • Flexible shaft included
  • Corded 220–240V operation

Specifications

BrandHAINA
ModelH-7007
CategoryPower Tools, Grinders
CompatibilityUniversal, not device-specific
TechnologyCorded electric, flexible shaft
Input Voltage220–240V
Power Rating180W

Common Repair Uses

  • Trimming plastic casing edges on phone housings
  • Shaping small metal brackets and frames
  • Polishing contact surfaces and metal trims
  • Cleaning oxidation off small metal parts

Compatible Devices

  • Universal, general-purpose rotary tool, not device-specific
  • Bits with shank up to 3.2mm (collet capacity)
  • Flexible shaft handpiece (included in kit)

FAQ

What is the product name?
The product name is Haina H-7007 Die Grinder.
What is the brand of this product?
The brand of this product is HAINA.
What is the model of this product?
The model of this product is H-7007.
What is this product used for?
This product is used for trimming, shaping, polishing and cleaning small metal and plastic parts.
Which devices are compatible with this product?
This product is a universal rotary tool and is not device-specific. It accepts bits with shanks up to 3.2mm.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the maximum bit size for the Haina H-7007?
The Haina H-7007 accepts bits with a maximum shank diameter of 3.2mm.
What speed range does the Haina H-7007 run at?
The Haina H-7007 runs at a no-load speed of 8000 to 30000 rpm.