2UUL SA13 Screen Sealing Adhesive for iP13 (5pcs/Pack)
₨ 900
iPhone 13 Frame Seal, 5-Piece Pack
The 2UUL SA13 is an iPhone 13 screen sealing adhesive that gives your bench a pre-cut, double-sided frame seal for display reassembly. Each pack holds five pieces, so one purchase covers five screen jobs. You lay the adhesive on a cleaned frame, seat the display, and apply heat and pressure with a compatible hot press to restore the sealed fit around the bezel. Mechanicpk supplies the SA13 to Pakistani repair shops and service centers that handle iPhone 13 screen replacements, battery swaps, and Face ID repairs every week.
In stock
2UUL SA13 iPhone 13 Screen Sealing Adhesive for Controlled Display Reassembly
Every iPhone 13 that leaves your bench after a display job needs a proper seal between the screen and the frame. The 2UUL SA13 is an iPhone 13 screen sealing adhesive that gives you a pre-cut, double-sided frame seal for exactly that step. 2UUL cuts it to the iPhone 13 frame outline, so you skip measuring, trimming, and the guesswork that comes with generic tape. Mechanicpk supplies the SA13 in a five-piece pack to repair shops and service centers across Pakistan that run iPhone 13 screen jobs as daily work.
Technical Profile of the SA13
The SA13 is a pre-cut, double-sided adhesive sized for the iPhone 13 screen frame. 2UUL sells it as a sealing adhesive, not a general-purpose tape, and its instructions describe a heat-and-pressure application. You clean and inspect the frame for deformation, lay the adhesive on the frame, then press the display down with heat using a 2UUL DA07 Mini Hot Press Station or another heating pressure press. 2UUL describes this process as restoring the phone’s IP67 airtightness. Final sealing performance still depends on frame condition, installation quality, and the pressure you apply, so treat the adhesive as one controlled step in the reassembly rather than a standalone guarantee. The pieces arrive pre-cut, which gives you identical placement on every job and no blade work near the display edge.
Where It Fits in the iPhone 13 Repair Workflow
The seal goes on last. You open the phone, lift the old display, clear the old adhesive from the frame, straighten any bend, and test the new display before you commit to sealing. Then you place the SA13 and press. A microscope helps you inspect the frame edges for leftover residue and small deformations, and a PCB holder keeps the frame steady while you clean it. After the press, a quick multimeter check on the charging and battery lines gives you a final confirmation that the job left nothing disturbed. Skip the seal and you send out a phone that looks finished but lets dust in around the bezel. That turns into a display problem or a touch complaint a week later, and the customer walks back to your counter.
Repair Jobs That Use This Adhesive
Any iPhone 13 job that opens the display breaks the original seal. Screen replacement is the obvious case. Battery replacement, charging issue repairs that need the display lifted to reach the charging port flex, and Face ID component work all start with display removal, so each one ends with a fresh seal. Reseal on every reopening: once you lift the screen again, the seal from the previous job no longer holds, so use a new piece each time. Five pieces per pack covers five of these jobs, which suits a busy counter and keeps a spare ready for the day a phone returns for a second opening.
Buying iPhone Screen Sealing Adhesive in Pakistan
Match the part number to the model before you order. The SA13 fits the iPhone 13. The other 13-series models use their own 2UUL numbers: SA13M for the Mini, SA13P for the Pro, and SA13PM for the Pro Max. Pair the adhesive with a compatible heat press. 2UUL also lists its DA63 sealant thermal press plate for the iPhone 13 series. Keep tweezers on the bench so you place each piece on the frame without stretching it. Buy several packs if your shop handles iPhone 13 volume every week, because the adhesive costs far less than a comeback for an unsealed screen. You can browse the Hot Air Stations, Microscopes, and PCB Holders categories to build out the rest of your iPhone display bench.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Pre-cut to the iPhone 13 screen frame outline
- ✓Double-sided adhesive for display-to-frame sealing
- ✓Five pieces per pack for five screen jobs
- ✓Heat-and-pressure application for a sealed fit
- ✓Works with the 2UUL DA07 Mini Hot Press Station or another heating pressure press
- ✓Compatible with the 2UUL DA63 sealant thermal press plate lineup for the iPhone 13 series
- ✓Model-specific part number (SA13) for easy stock matching
- ✓Made for professional screen replacement and reassembly
Specifications
| Brand | 2UUL |
|---|---|
| Model | SA13 |
| Category | Screen Sealing Adhesive |
| Compatibility | iPhone 13 |
| Supported Devices | iPhone 13 |
| Technology | Pre-cut double-sided adhesive, heat-press application |
Common Repair Uses
- ✓Resealing the iPhone 13 display to the frame after any repair that opens the screen
- ✓iPhone 13 screen replacement
- ✓iPhone 13 battery replacement
- ✓Charging port repair that needs display removal
- ✓Face ID component repair
- ✓Frame resealing after cleaning old adhesive residue
- ✓Display reassembly with a hot press or thermal press plate
Compatible Devices
- ✓iPhone 13 only (model-specific part, not universal)
- ✓iPhone 13
- ✓Other 13-series models need their own 2UUL part numbers: SA13M (Mini), SA13P (Pro), SA13PM (Pro Max)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the 2UUL SA13 need a hot press to install?
Can I use the SA13 on iPhone 13 Mini, Pro, or Pro Max?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



