2UUL SA12PM iPhone 12 Pro Max Screen Sealing Adhesive
₨ 900
iPhone 12 Pro Max Screen Sealing Adhesive
The 2UUL SA12PM is a pre-cut, double-sided iPhone 12 Pro Max screen sealing adhesive that goes onto the frame before you set the display back in. Each pack holds 5 pieces, so one purchase covers five screen jobs on your bench. The cut matches the 12 Pro Max frame, so you skip trimming strips by hand and keep the same seal line on every repair. Clean the frame, lay the adhesive, then press it with a heat press such as the 2UUL DA07 Mini Hot Press Station to bond the display and restore the phone’s IP67 airtightness.
Out of stock
2UUL SA12PM iPhone 12 Pro Max Screen Sealing Adhesive for Display Resealing
Every iPhone 12 Pro Max that leaves your bench after a screen change needs a fresh seal around the display frame. The 2UUL SA12PM iPhone 12 Pro Max screen sealing adhesive gives you that seal as a pre-cut, double-sided film. 2UUL builds its SA series for iPhone 12 through 17 models, and the SA12PM covers the 12 Pro Max in that range. Each pack holds 5 pieces, so you stock it as a repair consumable instead of a one-off accessory. Shops and service centers across Pakistan that handle iPhone display jobs reach for this film on every front-assembly reinstall.
Why Pre-Cut Geometry Matters on the 12 Pro Max Frame
Hand-cut tape drifts. It leaves gaps at the corners, overlaps in places it should not, and changes from one job to the next. A pre-cut film removes that variable. The SA12PM follows the iPhone 12 Pro Max frame outline, so you lay it down once and move on without measuring, trimming, or shaping strips.
The film bonds on both faces. One side grips the frame and the other grips the display assembly, and 2UUL describes the adhesive as high-strength with long-lasting hold. That matters on a large device like the Pro Max, where a weak edge lets the panel lift under pocket pressure and lets dust into the display cavity. A consistent seal also protects the finished repair from the return visit that costs you time and customer trust.
Application Workflow on Your Repair Bench
Start with a clean frame. Strip the old adhesive, wipe the residue away, and check the frame for deformation, because a bent frame stops any adhesive from sealing evenly. A hot air station at low temperature softens stubborn old film, and a microscope shows you leftover residue along the edges before you apply anything new.
Peel the SA12PM from its backing, lay it on the frame, and seat the display. The final step decides the quality of the seal. 2UUL’s instructions call for a heat press such as the 2UUL DA07 Mini Hot Press Station, or another heating pressure press, to bond the film and restore the iPhone’s IP67 airtightness. For positioning, 2UUL also makes the DA62 sealant thermal press plate for the iPhone 12 series, which keeps the frame adhesive aligned during lamination. Follow that sequence and you close up a screen change cleanly instead of sending out a display that floats on the frame.
Where It Fits in Your iPhone Screen Repair Stock
The SA12PM belongs in the front-assembly side of your iPhone workflow: screen replacement, LCD frame repair, and any job where you open the display and reseal it. Suppliers also list battery and Face ID replacements among the jobs that need a renewed seal, since each of those jobs breaks the factory film. For a customer who walks in with a display problem on a 12 Pro Max, this film is part of the job, not an optional extra.
Pick the right variant for each model. 2UUL lists separate adhesives for the iPhone 12 Pro (SA12P) and the iPhone 12 Mini (SA12M), so the Pro Max needs the SA12PM specifically. A 5-piece pack suits a busy bench. Pair it with related tools from the same workflow, such as hot air stations, microscopes, and PCB holders from the Mechanicpk catalog, plus the heat press and thermal plate named above.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Pre-cut to fit the iPhone 12 Pro Max frame
- ✓Double-sided high-strength adhesive for long-lasting hold
- ✓No manual measuring or cutting
- ✓Works with heat-press sealing to restore the iPhone’s IP67 airtightness
- ✓Suits front screen replacement and frame repair
- ✓5 pieces per pack for repeat jobs
- ✓Pairs with 2UUL DA07 Mini Hot Press Station and DA62 thermal press plate
- ✓Built for repair shops and professional technicians
Specifications
| Brand | 2UUL |
|---|---|
| Model | SA12PM |
| Category | Screen Sealing Adhesive |
| Compatibility | Apple iPhone 12 Pro Max |
| Supported Devices | iPhone 12 Pro Max |
| Technology | Pre-cut double-sided adhesive, heat-press application |
| Pack Quantity | 5 pcs per pack |
Common Repair Uses
- ✓Display resealing and airtightness restoration on iPhone 12 Pro Max repairs
- ✓Front screen replacement on the iPhone 12 Pro Max
- ✓LCD or frame repair where the display comes off the frame
- ✓Resealing after battery replacement
- ✓Resealing after Face ID repair
- ✓Restoring dust and moisture resistance after any repair that opens the display
- ✓Batch screen jobs on a repair bench, using the 5-piece pack
Compatible Devices
- ✓Apple iPhone 12 Pro Max only (model-specific, not universal)
- ✓Apple iPhone 12 Pro Max front display frame
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the SA12PM on an iPhone 12 Pro or iPhone 12 Mini?
Do I need a heat press to apply the SA12PM?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



