2UUL SA12P Screen Sealing Adhesive for iPhone 12 Pro
₨ 900
2UUL SA12P Sealing Adhesive for iPhone 12 Pro
The 2UUL SA12P is a pre-cut, double-sided iPhone 12 Pro screen sealing adhesive that goes onto the cleaned frame before you seat a replacement display. Each pack holds 5 pieces, so you cover five screen jobs without measuring or trimming tape by hand. Pair it with a hot press station or another heating pressure press and you restore the airtightness the iPhone’s IP67 rating relies on. Mechanicpk supplies the SA12P to repair shops and service centers across Pakistan that handle iPhone 12 Pro display replacement and want a consistent, repeatable seal on every unit.
In stock
iPhone 12 Pro Screen Sealing Adhesive: 2UUL SA12P for Display Replacement
The 2UUL SA12P iPhone 12 Pro screen sealing adhesive is a pre-cut, double-sided frame seal. It bonds a replacement display to the iPhone 12 Pro chassis and closes the gap where dust and moisture get in. Opening the screen breaks the factory seal, and a fresh adhesive frame is what brings the airtightness back. Mechanicpk stocks the SA12P in a 5-piece pack, so one purchase covers several display replacements on your repair bench.
Pack Specifications That Matter at the Bench
Each adhesive measures 145 x 70 x 0.5 mm, and the 0.5 mm profile keeps the display flush with the frame once pressed. The pre-cut shape follows the iPhone 12 Pro frame outline, so you skip measuring, cutting and trimming. The full 5-piece pack weighs 100 g net and ships in 260 x 104 x 3.5 mm packaging. 2UUL sells this adhesive as a high-strength double-sided tape that gives long-lasting adhesion once cured under heat and pressure. 2UUL also publishes sister part numbers for the iPhone 12 (SA12) and iPhone 12 Mini (SA12M). Match the SA12P code to the iPhone 12 Pro on your bench before you open the pack.
Application Workflow for Display and Frame Repair
Start with a clean frame. Remove old adhesive residue, then inspect the frame for deformation, because a bent frame stops any tape from sealing evenly. Lay the SA12P onto the frame, seat the display, and press with heat. 2UUL’s own instructions point to its DA07 Mini Hot Press Station or any other heating pressure press to achieve a perfect fit and restore the iPhone’s IP67 airtightness. 2UUL also lists the DA62 thermal press plate for the iPhone 12 series, which positions the adhesive around the frame during lamination. A microscope helps you check the adhesive edge for gaps before you close the phone. A PCB holder keeps the frame steady while you press. Shops that already run hot air stations and soldering stations for board-level work can add this seal as the final step of a display replacement job.
Choosing This Seal for Your iPhone 12 Pro Repairs
A loose or lifted display edge brings repeat visits: dust under the glass, a display problem that returns, or a customer who asks why the phone no longer resists water. A matched, pre-cut adhesive removes the guesswork. The SA12P gives you one dedicated part number for the iPhone 12 Pro, so you stock exactly what the job needs and nothing generic. The 5-piece pack suits shops that replace iPhone 12 Pro screens regularly, and it keeps cost per job low without cutting corners on the seal. Technicians who sell screen replacement as a premium service can use the SA12P to restore airtightness on each unit they hand back.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Pre-cut double-sided adhesive for the iPhone 12 Pro frame
- ✓High-strength bond for long-lasting adhesion
- ✓0.5 mm thin profile for a flush display fit
- ✓5 pieces per pack for multiple repair jobs
- ✓Works with 2UUL DA07 Mini Hot Press Station or another heating pressure press
- ✓Restores the airtightness behind the iPhone’s IP67 rating
- ✓No measuring or trimming, which saves time on every screen installation
- ✓Dedicated 2UUL part number (SA12P) for the iPhone 12 Pro
Specifications
| Brand | 2UUL |
|---|---|
| Model | SA12P |
| Category | Screen Sealing Adhesive |
| Compatibility | iPhone 12 Pro |
| Dimensions | 145 x 70 x 0.5 mm |
| Weight | 100 g (net, 5-piece pack) |
| Packaging Dimensions | 260 x 104 x 3.5 mm |
| Pack Quantity | 5 pieces |
Common Repair Uses
- ✓Front display replacement and frame re-sealing on the iPhone 12 Pro
- ✓iPhone 12 Pro front display replacement
- ✓Re-sealing the screen frame after opening the phone
- ✓Restoring dust and water resistance (IP67 airtightness) after repair
- ✓Heat-press lamination of the display to the frame
- ✓Re-sealing the frame after battery or Face ID module work
Compatible Devices
- ✓iPhone 12 Pro (model-specific adhesive, matched to the iPhone 12 Pro frame)
- ✓iPhone 12 Pro
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Do I need a heat press to install the 2UUL SA12P adhesive?
Can I use the SA12P on iPhone 12, 12 Mini or 12 Pro Max?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock



