Mechanic 223 BGA Flux Paste 100g No-Clean Soldering

₨ 1

BGA Flux Paste 100g for Phone and Computer Chip Rework

The Mechanic 223 BGA flux paste comes in a 100g pack for BGA, SMD and PGA soldering. Its high viscosity suits reballing and reprocessing of phone and computer chips, where the paste must stay in place on the pads. The mix of alloyed powder and resinous paste is built to limit pale yellow residue, which keeps the board easier to clean. Keep this jar on your rework station for motherboard repairs and high-volume bench work.

Out of stock

19 People watching this product now!
Description

BGA Flux Paste 100g for Mechanic 223 Reballing and Rework

A BGA flux paste 100g jar is a bench consumable that sits between your chip and your solder, so the formula you choose affects every joint. The Mechanic 223 is built for BGA, SMD and PGA soldering, and technicians use it to reball and reprocess phone and computer chips. Unlike thin liquid flux, this paste has a high viscosity that holds its shape on the pad during heating. Your workflow starts with cleaning the pads, applying a controlled layer, and reflowing with a hot air station or soldering iron. The paste then helps solder wet the pads evenly and protects them during heating.

Where This Flux Fits in Your Repair Workflow

Most BGA jobs follow the same sequence: lift the chip, clean the pads, apply the flux, place the balls, and reflow. This paste belongs at the flux step, and it performs best when the pads are already clean and flat. Old solder and oxidation on the pads will weaken the joint no matter how good the flux is, so remove them with braid and isopropyl alcohol first. Apply the paste with a stencil or a needle tip so the layer stays thin and even across the pad field. Fine-pitch packages leave little room for excess paste, so check the chip edges before you heat. The same jar serves reballing, SMD touch-ups, and PGA rework, which keeps your consumables simple across different jobs.

Application Tips for Clean, Reliable Joints

Start with a small amount, because too much paste can bridge fine-pitch pads and leave more residue than you need. Warm the board slightly before reflow so the flux activates evenly across the whole chip rather than only at the hot spot. Watch the paste during heating; it should spread into a smooth, shiny joint instead of balling up or going dull. If the joint looks grainy, check your temperature profile and dwell time before you add more flux. Work in short passes, let the board cool, and inspect under magnification before you move to the next chip. This approach gives you consistent results across phone motherboards and laptop boards alike.

Storage, Residue, and Cleanup After Soldering

Keep the jar sealed and away from heat, because exposure to air and warmth thickens the paste and reduces its workability. Replace the lid straight after each session so the paste stays usable for longer on your bench. The formula is designed to leave low residue, so most boards need only a light wipe after soldering. A cleaning pass with isopropyl alcohol and a soft brush removes most leftover traces from the board surface. Check the pads and surrounding components under a microscope before you power the device on. Label the jar with the date you opened it so you can track how long it stays in service.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Formulated for BGA, SMD and PGA soldering
  • High-viscosity paste that stays in place during application
  • Mix of alloyed powder and resinous paste
  • Designed to limit pale yellow residue after soldering
  • 100g bulk pack for high-volume bench use
  • Suitable for PCB, phone and computer chip reprocessing

Specifications

BrandMechanic
ModelUV-223
CategorySoldering Flux Paste
CompatibilityUniversal, not device-specific
TechnologyHigh-viscosity no-clean flux paste
Net Weight100g

Common Repair Uses

  • BGA chip reballing for CPU, GPU and IC replacement
  • Reprocessing BGA chips on phone mainboards
  • SMD component soldering and touch-ups on PCB boards
  • Fine-pitch joint repair during IC replacement
  • Motherboard rework on phones and computers

Compatible Devices

  • Universal, not device-specific. Verified scope covers BGA chips, SMD components, and PGA packages on phone and computer boards.
  • BGA chips on mobile phone motherboards
  • BGA chips on laptop and computer motherboards
  • SMD components on PCB boards
  • PGA packages on computer boards
  • Fine-pitch IC pads during rework

FAQ

What is the product name?
The product name is Mechanic 223 BGA Flux Paste 100g.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is UV-223.
What is this product used for?
This product is used for BGA, SMD and PGA soldering, including reballing and reprocessing of phone and computer chips.
Which devices are compatible with this product?
This product is compatible with BGA chips, SMD components and PGA packages on mobile phone and computer motherboards, and it is universal rather than device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can this flux be used for BGA reballing?
Yes, the paste is used for soldering and reballing computer and phone chips, so it fits standard BGA reballing workflows when the pads are clean.
Does this flux leave residue after soldering?
The paste is formulated to leave low residue, so most boards need only a light wipe with isopropyl alcohol after soldering.