Mega-idea JJ-003 Ultra-thin Fixture for PCB Repair

₨ 1

Ultra-Thin PCB Fixture for Mainboard Repair

The Mega-idea JJ-003 Ultra-thin Fixture holds phone mainboards and small chips steady on your repair bench. Its slim body sits low under a microscope, so your focus distance stays the same from board to board. An adjustable clamp range, a wheel-driven clamp control, and multiple clamp notches let you secure boards of different widths without stressing components. A dedicated chip area and a component parking zone keep your workspace organized during chip-level jobs. If you run hot air and soldering workflows, you get a stable, high-temperature-resistant platform built for mobile PCB repair.

Out of stock

10 People watching this product now!
Description

Mega-idea JJ-003 Ultra-thin Fixture for Chip-Level Mobile Repair

The Mega-idea JJ-003 Ultra-thin Fixture gives chip-level technicians a low-profile platform for holding phone mainboards and small chips during board repair. Every hardware fault job starts with a stable board, and a stable board decides how clean your rework turns out. The JJ-003 targets that first step. Its slim body, adjustable clamping range, and dedicated work zones suit technicians who handle IC replacement, CPU rework, and diagnostics every day. This page covers what the fixture does, where it fits in your workflow, and which verified details matter before you buy.

Low-Profile Body That Works With Your Microscope

Most PCB holders sit tall on the bench, which forces you to refocus the microscope whenever you swap fixtures. The JJ-003 uses an ultra-thin body that keeps the board close to the work surface, so your microscope objective distance stays consistent from one board to the next. You skip the constant refocusing, and your eyes stay on the chip instead of the controls. Notches cut into the contact surface reduce how much of the mainboard touches the fixture. Less contact means the fixture pulls less heat from the board during hot air work, which protects nearby components while you reflow a chip.

Adjustable Clamp Range and Zoned Work Areas

Mainboards differ in width, and a fixed jaw forces compromises. The JJ-003 solves this with an adjustable clamp range. The left side of the fixture extends, so one holder covers a wider spread of phone mainboards. A wheel controls the clamp travel, which lets you tighten the grip gradually until the board holds firm without pressure on components. Multiple clamp notches give you more than one holding position, and the fixture’s high-temperature resistance and anti-static properties suit soldering and rework sessions.

Separate zones cover each task. One area fixes the phone mainboard. A second area fixes small chips, with adjustable sizing for most phone chips. A third area parks removed components, so small parts stay put while you work. The listed size is 147.7 x 88.7 mm, a compact footprint that fits beside a hot air station and soldering station.

Where the JJ-003 Fits in Your Repair Workflow

Place the JJ-003 at the start of any board-level job. Clamp the mainboard, set the fixture under the microscope, then work through your diagnosis: check rails with a multimeter, trace the shorted line, and mark the suspect IC. When you remove a chip for an IC change, drop the part into the component area so you track it through reballing or reflow. Small chips stay fixed in the chip area while you clean pads, apply flux, or prepare a reballing session.

Dead phone cases, charging issue boards, and display problem boards after a drop all pass through this kind of workflow, and a steady fixture shortens each step. Pair the JJ-003 with a hot air station, a soldering station, and your microscope setup, then browse our PCB holders, reballing kits, and multimeters to complete the bench around it. Distributors list the fixture as universal, so it does not lock you into a single phone brand or model.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Ultra-thin body that suits microscope use without constant refocusing
  • Adjustable clamp range with an extendable left side
  • Wheel control for gradual, firm clamping
  • Multiple clamp notches for different holding positions
  • Surface notches that reduce contact area and heat absorption
  • Dedicated area to fix the phone mainboard
  • Adjustable area to fix small chips
  • Component storage area plus high-temperature resistance and anti-static properties

Specifications

BrandMega-idea
ModelJJ-003
CategoryPCB Holder / Repair Fixture
CompatibilityUniversal
Supported DevicesUniversal phone mainboards
Dimensions147.7 x 88.7 mm

Common Repair Uses

  • Board-level holding, chip fixing, and component handling during mobile PCB repair
  • Holding a mainboard steady during chip-level diagnostics
  • IC removal and replacement with hot air
  • CPU and motherboard IC repair
  • Fixing small chips for pad cleaning and preparation
  • Reballing and reflow preparation
  • Soldering work on mainboard components
  • Temporary storage of removed components during a repair
  • Microscope-based board inspection

Compatible Devices

  • Universal phone mainboard and chip fixing scope (not limited to one brand)
  • Universal smartphone mainboards
  • Apple iPhone mainboards
  • Samsung mainboards
  • Huawei mainboards
  • Xiaomi mainboards
  • Mainboards of varying widths (extendable left side)
  • Small phone chips and CPUs held in the chip-fixing area
  • Compact logic boards worked on under a microscope

FAQ

What is the product name?
The product name is Mega-idea JJ-003 Ultra-thin Fixture.
What is the brand of this product?
The brand of this product is Mega-idea.
What is the model of this product?
The model of this product is JJ-003.
What is this product used for?
This product is used for holding phone mainboards and small chips steady during chip-level repair, rework, and inspection.
Which devices are compatible with this product?
This product is compatible with universal phone mainboards, and distributors list it for Apple, Huawei, Samsung, and Xiaomi boards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the JJ-003 hold mainboards of different widths?
Yes. The left side of the fixture extends, and a wheel controls the clamp range, so you can adjust the grip to fit different mainboard widths.
Is the JJ-003 suitable for hot air rework?
The manufacturer lists the fixture as high-temperature resistant, and its surface notches reduce the contact area with the board. No exact temperature rating is published, so set your hot air station according to your usual board-level practice.