JCID V1SE 13-15 Series Face ID Adaptor

₨ 999

JCID Face ID Adaptor for iPhone 13-15

The JCID Face ID adaptor 13-15 series gives your V1SE or V1S Pro programmer a dedicated data path for Face ID work on iPhone 13, 14 and 15 models. You buckle the converter onto the 13 socket of the Face ID adaptor or module, read the original Face ID data, and write it to the 15 series Face ID FPC. JCID designed it for its own programmer ecosystem, so you stay inside one workflow instead of swapping between unrelated boards. Mechanicpk supplies it to Pakistani repair shops and service centers that handle Face ID faults after screen swaps, dot projector damage, or board-level repair.

In stock

13 People watching this product now!
Description

JCID Face ID Adaptor 13-15 Series for V1SE and V1S Pro Programmers

The JCID Face ID adaptor 13-15 series extends your programmer’s Face ID capability to the newer iPhone generations. The converter buckles onto the 13 socket of the Face ID adaptors and modules in your JCID kit. From that point you read Face ID data and write it to the 15 series Face ID FPC, which turns a generation-specific job into one repeatable connection path. You run it with the V1SE or the V1S Pro. Workshops that already use JCID programmers for True Tone, battery and Face ID jobs add iPhone 13, 14 and 15 coverage without rebuilding the bench.

Where the Adaptor Fits in a Face ID Repair

Face ID complaints reach the bench in several forms: Face ID stops working after a screen or flex replacement, a drop damages the dot projector, or a module change leaves the new part unmatched to the phone. The adaptor handles the data stage of that repair. The dot projector data lives with the original module, and a replacement Face ID FPC needs that data before it works. You read the data from the original, then write it to the 15 series Face ID FPC through the converter.

The adaptor covers data transfer only. A hardware fault such as a torn flex, a damaged component or a short on the board still needs diagnosis first. Put the board under a microscope, check the lines with a multimeter, and fix the fault with a soldering station or hot air station before you reach the programmer step. Hold the board in a PCB holder while you work so the Face ID area stays steady under magnification.

Programmer Pairing and Compatibility Scope

JCID pairs its newer Face ID adaptors with the V1SE and the V1S Pro, and it lists the original V1S as unmatched. Confirm your programmer model before you order, because the V1S will not drive this adaptor. The supported device range runs from the iPhone 13 series through the iPhone 15 series, including the standard, Plus, Pro and Pro Max variants where the series offers them.

If your repair queue also includes iPhone 16 devices, JCID offers a separate 13-16PM Face ID adaptor that extends the same read and write approach to that series. That gives you a clear upgrade path: start with the 13-15 converter for current volume, then move to the wider adaptor when 16 series jobs justify it. Pair either adaptor with JCID tag-on Face ID repair FPCs when the job calls for a non-removal repair route.

Why Technicians Choose This Adaptor

You keep Face ID work inside the programmer you already own. You avoid a separate standalone Face ID machine, and you avoid learning a new software environment for each iPhone generation. For a shop that sees iPhone 13 to 15 volume every week, the converter means one connection method across three generations of devices.

The adaptor also suits a workshop that separates hardware and software roles. A hardware technician fixes the board, then hands the phone to the software desk, where the programmer finishes the Face ID data step. Both stages stay in the same JCID workflow, which keeps handover simple.

Mechanicpk stocks JCID programmer accessories for Pakistani repair shops, service centers and training institutes. Match this adaptor with your V1SE or V1S Pro, and review the rest of the JCID range for True Tone, battery and camera adaptors that share the same programmer.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Converter design buckles onto the 13 socket of JCID Face ID adaptors and modules
  • Reads original Face ID data and writes it to the 15 series Face ID FPC
  • Covers iPhone 13, 14 and 15 series Face ID repair
  • Works with JCID V1SE and V1S Pro programmers
  • One connection path across three iPhone generations
  • Fits inside the existing JCID programmer workflow
  • Pairs with JCID tag-on Face ID repair FPCs
  • Clear upgrade route to JCID’s 13-16PM adaptor for iPhone 16 series

Specifications

BrandJCID
ModelConvert 13-15 Series Face ID R&W Adaptor
CategoryiPhone Face ID Repair Adaptor / Programmer Accessory
CompatibilityJCID V1SE, JCID V1S Pro
Supported DevicesiPhone 13, iPhone 14 and iPhone 15 series
TechnologyFace ID dot projector data read and write

Common Repair Uses

  • Face ID data transfer and repair on iPhone 13 to 15 series through a JCID programmer
  • Reading original Face ID data from an iPhone 13-15 module
  • Writing Face ID data to a 15 series Face ID FPC
  • Repairing Face ID after a dot projector fault
  • Restoring Face ID after a module or flex replacement
  • Handling Face ID jobs after screen replacement
  • Running Face ID repair on iPhone 13 series devices through the 13 socket
  • Supporting the software stage after board-level Face ID hardware repair
  • Standardizing Face ID workflow across iPhone 13, 14 and 15 jobs

Compatible Devices

  • iPhone 13 to iPhone 15 series, used with JCID V1SE or V1S Pro (JCID lists the original V1S as unmatched)
  • iPhone 13 and iPhone 13 mini
  • iPhone 13 Pro and iPhone 13 Pro Max
  • iPhone 14 and iPhone 14 Plus
  • iPhone 14 Pro and iPhone 14 Pro Max
  • iPhone 15 and iPhone 15 Plus
  • iPhone 15 Pro
  • iPhone 15 Pro Max
  • JCID V1SE and V1S Pro programmers

FAQ

What is the product name?
The product name is JCID V1SE 13-15 Series Face ID Adaptor.
What is the brand of this product?
The brand of this product is JCID.
What is the model of this product?
The model of this product is Convert 13-15 Series Face ID R&W Adaptor.
What is this product used for?
This product is used for reading and writing Face ID data on iPhone 13 to 15 series devices through a JCID V1SE or V1S Pro programmer.
Which devices are compatible with this product?
This product is compatible with the iPhone 13, iPhone 14 and iPhone 15 series, used with a JCID V1SE or V1S Pro programmer.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the JCID 13-15 Face ID adaptor work with the original V1S programmer?
No. JCID pairs its newer Face ID adaptors with the V1SE and V1S Pro and lists the original V1S as unmatched, so use a V1SE or V1S Pro.
Does this adaptor cover iPhone 16 Face ID repair?
This adaptor covers the iPhone 13 to 15 series. For iPhone 16 series Face ID work, JCID offers a separate 13-16PM Face ID adaptor.