2UUL DA02 Third Gen. Oversize Press Clamp
₨ 6,500
Oversize Press Clamp for Mobile Repair
The 2UUL DA02 Third Gen. Oversize Press Clamp holds large phone and tablet screens flat while adhesive cures after glass replacement. Each set includes two clamps with an oversize metal frame measuring 342 mm by 35 mm by 57 mm, plus foam inserts that protect the device surface. The wide, flat pressure bar spreads force across the panel, which helps you get an even bond on iPads, tablets and bigger phones. Mechanicpk supplies the DA02 to repair shops across Pakistan that want a dependable oversize press clamp for mobile repair, so your bench keeps moving while the screen cures.
In stock
2UUL DA02 Oversize Press Clamp for Mobile Repair Benches
The 2UUL DA02 Third Gen. Oversize Press Clamp is a purpose-built oversize press clamp for mobile repair benches that handle tablets, iPads and large-format phones. You get a set of two clamps that hold a freshly seated screen or back glass flat while the adhesive cures. Mechanicpk supplies the DA02 to technicians and service centers in Pakistan who run steady screen replacement volume and cannot afford lifting edges, uneven bonds or dust trapped under the glass.
Frame, Pressure Bar and Foam Protection
2UUL builds the DA02 around an oversize metal frame that measures 342 mm long, 35 mm wide and 57 mm high per clamp. A wide, flat pressure bar spreads force across the glass instead of concentrating it at one point. That matters on large panels, where a narrow jaw bends the frame or stresses the LCD. Foam inserts sit between the clamp and the device, so the contact surface protects the glass and housing for the whole curing period.
The Third Gen. set ships two clamps, which lets you hold two points along a long tablet or a bigger phone at the same time. Two clamps also give you a practical way to balance pressure across the length of the panel, so no single edge carries the full load while the adhesive sets.
Where the DA02 Fits in the Screen Repair Workflow
A screen replacement does not end when the new display seats in the frame. You separate the old panel with a hot air station or LCD separator, clear the leftover adhesive, apply fresh adhesive and seat the new glass. The bond then needs steady, even pressure until it sets. The DA02 takes that job off your hands. Clamp the device, set it aside and move to the next repair while you work under the microscope or fit the next board into a PCB holder.
Most display problems after replacement, such as lifting corners, gaps along the frame or dust lines under the glass, trace back to uneven pressure during curing. A press clamp removes that variable. The DA02 also suits iPhone back glass jobs, where the new glass needs the same flat, even hold after re-bonding. Tablet and iPad screen replacement is where the oversize format earns its place on the bench.
Build a simple routine around it. Seat the screen, check the alignment of the edges, then clamp and leave the device untouched for the full cure time of your adhesive. Resist the urge to lift the clamp early to check the bond. A repair shop that follows this routine sees fewer comebacks and fewer warranty claims on display jobs, and that saves more time than any other single step in the screen workflow.
Choosing the DA02 Over a Compact Clamp
2UUL also makes the smaller DA03 Lite clamp at 199 mm by 80.5 mm by 52 mm, which suits standard phones and back covers. The DA02 steps up when your workload includes tablets, iPad screens and larger glass, because its 342 mm bar covers far more of the panel edge. Many shops run one compact clamp for phone work and add DA02 sets as tablet volume grows.
If you repair iPads and Android tablets in a busy workshop, the oversize set lets you cure several jobs in parallel instead of waiting on a single fixture. That keeps your bench turning over repairs and keeps your finished screens sitting flat. Before you order, check the size of the devices you repair most. The DA02 targets large-format work, so a shop that only handles small phones gets better value from the compact model.
| Weight | 1.3 kg |
|---|
Key Features
- ✓Set of two oversize clamps for large phone and tablet panels
- ✓Third Gen. design from 2UUL
- ✓Metal frame measuring 342 mm x 35 mm x 57 mm per clamp
- ✓Wide, flat pressure bar spreads force evenly across the glass
- ✓Foam inserts protect the glass and housing during curing
- ✓Suits iPhone, iPad and tablet screen and glass replacement
- ✓Frees your bench while the adhesive sets
- ✓Fits workflows that use hot air stations, microscopes and PCB holders
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA02 (Third Gen., set of 2 clamps) |
| Category | Press Clamps / Screen Repair Tools |
| Compatibility | Universal — phone and tablet screen and glass replacement |
| Supported Devices | iPhone, iPad, tablets and large-format phones |
| Material | Metal frame with foam inserts |
| Dimensions | 342 mm x 35 mm x 57 mm per clamp |
Common Repair Uses
- ✓Pressing and holding glass or screens flat while adhesive cures
- ✓Holding a new LCD or glass flat after a tablet screen replacement
- ✓Pressing iPad screen glass after re-bonding
- ✓Setting iPhone back cover glass after replacement
- ✓Curing the bond after fresh adhesive application
- ✓Preventing lifting corners and frame gaps after a display job
- ✓Holding two points along a long panel with the two-clamp set
- ✓Freeing bench time while the adhesive sets
- ✓Keeping the screen flat during the full curing period
Compatible Devices
- ✓Universal press clamp for phones and tablets (not device-specific)
- ✓Apple iPhone LCD screen replacements
- ✓Apple iPhone back cover glass re-bonding
- ✓Apple iPad screen glass replacement
- ✓Android tablet screen replacement
- ✓Samsung phones and tablets
- ✓Huawei, Xiaomi and Lenovo tablets
- ✓Large-format phones that fit the 342 mm clamp bar
- ✓Any phone or tablet that needs flat, even pressure during adhesive cure
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What are the dimensions of the 2UUL DA02 press clamp?
Can the 2UUL DA02 press iPhone back glass and iPad screens?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



