Qianli iCopy Plus Battery Detection Board iPhone 5-XS Max
₨ 1,500
Qianli iCopy Plus Battery Board for iPhone 5-XS Max
Qianli iCopy Plus battery detection board connects your iCopy Plus programmer to the battery data of iPhone 5 through XS Max. You read stored battery health values, check the cycle count and adjust battery efficiency without guessing. The board handles the battery side of the job, so you can service batteries on the same iCopy Plus setup you already use for display and baseband work. Read the original values before you swap a battery, then verify the readings once the new battery is fitted. It suits repair shops, service centers and technicians who handle battery warning messages every day.
In stock
iCopy Plus Battery Detection Board for iPhone 5 to XS Max
The iCopy Plus battery detection board is the battery-side accessory for the Qianli iCopy Plus programmer. You connect it when the job involves battery data rather than display or baseband work. Once the board is seated and linked to the programmer, the iCopy menu reads the battery’s stored data, so you see what the phone recorded before you touch anything. That matters on iPhone 5 through XS Max, where a battery swap often triggers a health warning or resets values the customer expects to remain. Treat this board as a dedicated battery service tool with one clear job and a clear result on your bench. It works alongside the rest of your iCopy kit rather than replacing it.
Using the iPhone 5-XS Max Battery Board in Sequence
Start with the original battery still in place. Connect the board to the iCopy Plus, then read the stored data through the menu before you remove anything. Record the health percentage and cycle count, because these values show what the customer’s device actually holds. After you fit the new battery, return to the same menu and correct the efficiency or cycle values if the warning persists. Keep the battery connector clean and seated firmly, since a loose contact produces unreliable reads and wastes time. Log every reading in your job card so the next visit starts from facts rather than memory. Following this order protects the original reading and gives you a clear before-and-after record for the customer.
What the Board Unlocks Across iPhone 5 to XS Max
The iCopy Plus battery functions cover reading and writing battery data, checking battery health, modifying battery efficiency, clearing battery cycle life, and backing up battery data. These functions apply across the iPhone 5 family, 6 and 6 Plus, 6S and 6S Plus, 7 and 7 Plus, 8 and 8 Plus, and the X, XR, XS and XS Max. Each model behaves a little differently, so confirm the exact function on the programmer before you promise a result. The service serial number function sits in the same workflow, which helps when you need battery records tied to one specific device. Backing up the battery data first gives you a safety copy to restore if something goes wrong. Use the cycle reset for a battery you have already replaced, not to hide a worn cell from the customer. Honest reporting builds trust with repeat customers and protects your shop’s reputation.
Setup Notes Before Your First Battery Job
Confirm your iCopy Plus unit runs its latest software before you start, so the battery menu behaves as documented. Keep the battery board, the connection cable and the programmer leads organized so nothing gets pulled during a read. Work on a stable bench with good light and an anti-static mat, since a bent pin on a small connector costs more than the board itself. Label each battery with the customer’s job number before it leaves the bench. When a read fails, reseat the connector and retry once before you change any setting. These habits keep the board productive across hundreds of jobs instead of becoming a source of avoidable repairs.
| Weight | 0.2 kg |
|---|
Key Features
- ✓Works with the iCopy Plus programmer on iPhone 5 through XS Max
- ✓Reads and writes battery data
- ✓Checks battery health values
- ✓Modifies battery efficiency
- ✓Clears battery cycle life
- ✓Services the battery serial number
- ✓Backs up battery data
- ✓Uses the battery-side connection path of the iCopy Plus system
Specifications
| Brand | Qianli |
|---|---|
| Model | iCopy Plus Battery Detection Board (iPhone 5-XS Max) |
| Category | Tools |
| Compatibility | iCopy Plus programmer |
| Supported Devices | iPhone 5 through iPhone XS Max |
| Technology | iCopy Plus battery data read, write and correction |
Common Repair Uses
- ✓Reading original battery health before a battery replacement
- ✓Backing up stored battery data before any change
- ✓Restoring battery data after a new battery is installed
- ✓Correcting battery efficiency when a battery warning persists
- ✓Clearing the battery cycle count on a replaced battery
- ✓Checking battery data on a customer phone for diagnostics
- ✓Recording battery readings for job card documentation
- ✓Retrying a failed battery read after reseating the connector
Compatible Devices
- ✓Verified scope is iPhone 5 through XS Max, used with the iCopy Plus programmer
- ✓iPhone 5, 5C and 5S
- ✓iPhone 6 and 6 Plus
- ✓iPhone 6S and 6S Plus
- ✓iPhone 7 and 7 Plus
- ✓iPhone 8 and 8 Plus
- ✓iPhone X and XR
- ✓iPhone XS and XS Max
- ✓Requires the iCopy Plus programmer for battery data access



