Youtools UT-D251 500°C Silicone Heat Insulation Pad

₨ 1,500

Youtools UT-D251 Heat Insulation Mat for Repair Benches

The Youtools UT-D251 gives your repair bench a silicone surface rated to 500°C. It holds up around soldering iron tips and hot air nozzles without bulging. The honeycomb back grips the bench so the pad stays put during fine work. Its flame-retardant, anti-scalding surface protects your table through long sessions. The mat measures 175 x 251 mm and comes in grey, blue, and red.

In stock

14 People watching this product now!
Description

500°C Heat Insulation Soldering Mat for Mobile Repair Work

A stable, heat-safe surface is the first step of any board-level repair, and the Youtools UT-D251 gives you a 500°C heat insulation soldering mat built for that job. Whether you are working on a dead phone, a boot loop issue, or a charging issue board, your bench needs to stay clean and protected around hot tools. This silicone pad keeps stray heat from iron tips and hot air nozzles off your desk, while its honeycomb back holds the mat in place. You get a reliable base for diagnostics, component swaps, and reballing, from the first probe to the final test. Service centers and solo technicians both benefit from a mat that keeps the work area organized. The sections below cover heat resistance, grip and placement, and where the pad fits in your daily workflow.

Heat Resistance and Silicone Construction

The silicone body withstands temperatures up to 500°C, which covers the working range of standard soldering irons, hot air rework stations, and BGA setups. Silicone with this rating stays flexible, so you can roll or stretch the mat for storage without permanent deformation. The surface is flame-retardant, which lowers the risk of damage when a flux spark or a stray iron tip touches the pad. Its anti-scalding finish also helps protect your bench from heat marks during long sessions. You can wipe the matte surface clean after flux and solder residue, which keeps it ready for the next board. For technicians who switch between iron work and hot air work throughout the day, a single heat-rated mat keeps the setup uniform. Choose grey, blue, or red to match the rest of your workstation.

Honeycomb Anti-Slip Back and Stable Placement

The underside uses a honeycomb structure that grips the bench and prevents the mat from sliding during fine work. The double-hole design with square backflow grooves improves suction, so the pad settles flat once you press it down. Small screws, SIM trays, and loose ICs stay in place instead of rolling off the edge, which saves you from hunting for parts across the bench. Because the surface does not bulge, your tweezers and iron tip keep a steady angle during component replacement. This matters most during jumper work, where a shifted board can ruin an otherwise clean joint. Position the mat before you start a board, then check the grip before you apply heat. A pad that stays put gives you more control over every joint you solder.

Where the Pad Fits in Your Repair Workflow

Place the mat at the start of the rework stage, when you clean pads with flux and prepare the board for IC removal. It works alongside your soldering station during component replacement, jumper repair, and trace repair on mobile boards. During reballing, the anti-slip face holds the board steady while you apply paste and heat. After the work, the same surface supports inspection under a microscope before the board moves on to power testing. Replace the mat once the surface shows heavy scoring, so your bench keeps both its protection and its grip. A pad that carries you from diagnosis through final test keeps the whole workflow in one clean space.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Withstands temperatures up to 500°C
  • Honeycomb back structure for slip-free placement
  • Flame-retardant silicone construction
  • Anti-scalding, heat-resistant surface
  • Anti-skid surface that does not bulge
  • Elastic silicone that resists permanent deformation
  • Easy-to-clean matte finish
  • Available in grey, blue, and red

Specifications

BrandYoutools
ModelUT-D251
CategorySoldering Accessories / Insulation Pads
CompatibilityUniversal, not device-specific
TechnologyHoneycomb anti-slip back
MaterialSilicone
Dimensions175 x 251 x 4 mm

Common Repair Uses

  • Verified workflows where the mat protects the bench or holds the board
  • Protecting the bench while iron tips rest between joints
  • Supporting boards during hot air IC removal
  • Keeping small parts from sliding during reballing
  • Holding boards steady during flux application and cleaning
  • Soldering jumper repairs on dead phone boards (jumper lagana)
  • Protecting the workbench during desoldering of mobile ICs (IC change karna)
  • Setting boards on the pad before microscope inspection
  • Working on charging issue boards with iron-based component replacement

Compatible Devices

  • Universal workstation accessory, not tied to any phone model or chipset
  • Soldering stations used for motherboard and IC repair (any brand)
  • Hot air rework stations used for IC removal and replacement
  • BGA reballing and rework tables
  • Microscope maintenance platforms for board inspection
  • Desktop repair stations and workbenches
  • Mobile and tablet motherboard repair benches
  • Flux cleaning and PCB trace repair setups
  • Universal scope, not device-specific

FAQ

What is the product name?
The product name is Youtools UT-D251 Heat Insulation Soldering Mat.
What is the brand of this product?
The brand of this product is Youtools.
What is the model of this product?
The model of this product is UT-D251.
What is this product used for?
This product is used for protecting repair benches during soldering, hot air rework, and reballing.
Which devices are compatible with this product?
This product is compatible with universal soldering and hot air workstations. It is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the UT-D251 handle lead-free soldering on mobile boards?
The 500°C rating covers lead-free soldering, which runs well below that temperature, so the mat stays within its limit during standard rework.
Does the UT-D251 work with hot air rework stations?
The silicone handles the heat of a hot air station when you place boards on the mat during IC removal. Keep the nozzle above the surface rather than resting it directly on the silicone.