Qianli Bumblebee Stencil (QS49) SAM10 S7 Exynos 8890
₨ 799
Qianli QS49 BGA Stencil for Samsung S7 CPU Reballing
The Qianli Bumblebee Stencil (QS49) SAM10 gives your bench a dedicated CPU reballing template for Samsung Galaxy S7 boards with Exynos 8890 or Qualcomm MSM8996 processors. Square holes with rounded angles guide solder balls onto the BGA footprint, so you reball a lifted or reflowed CPU with repeatable alignment. The SAM10 tag in the name is a catalog code, not a Galaxy S10 reference: this stencil matches S7 hardware (G9300, G9350, G9308, G930F). Mechanicpk supplies it to Pakistani repair shops and service centers that handle Samsung board-level work.
In stock
Qianli QS49 BGA Stencil for Exynos 8890 and MSM8996 Boards
The Qianli QS49 BGA stencil gives you a ready-made reballing template for Samsung Galaxy S7 main boards, and the Qianli Bumblebee Stencil (QS49) SAM10 listing on Mechanicpk points to exactly that model. Qianli designed it around the Exynos 8890 and Qualcomm MSM8996 processors found in the S7 and S7 Edge, so the aperture pattern matches the package footprint you work on. You clean the CPU pads, lay the stencil over the package, and place solder balls through the openings with a fixed layout instead of freehand spacing. For a technician who handles Samsung board-level jobs every week, that consistency saves bench time and cuts rework.
Read the Model Code Before You Order
Catalog codes cause mix-ups, so check this one first. The SAM10 tag in the product name does not mean Galaxy S10. QS49 belongs to Qianli’s S7 range and covers Galaxy S7 and S7 Edge boards with Exynos 8890 or MSM8996 processors, including model numbers G9300, G9350, G9308 and G930F. Galaxy S10 boards need a different stencil, because a stencil only aligns with the ball map it was cut for. Open the phone, read the CPU marking under your microscope, and confirm the chip family before you add the stencil to your cart. That quick check prevents a wrong order and a wasted trip back to the market. If your bench also handles newer Galaxy boards, keep each Qianli stencil in its own labeled slot so the right model reaches the right board.
Square Holes, Round Angles: What the Design Gives You
Qianli cuts this Bumblebee stencil with square holes and rounded angles, a layout aimed at BGA packages. That layout makes the Qianli QS49 BGA stencil a practical match for the CPU footprint on S7 boards, where ball placement decides whether the joint holds. Rounded corners generally let paste or balls release more cleanly than sharp corners, which helps you keep ball height even across the array. Qianli’s product description also lists an updated treatment and newer materials that make the stencil easier to use and more precise, and it calls the sheet sturdy and durable over time. You still need steady hands and clean pads, but the stencil removes the alignment variable from the job. Pair it with quality solder paste or balls and a controlled hot air profile, and your reflowed CPU sits on a uniform joint pattern.
Where It Sits in a Samsung CPU Reballing Workflow
A Galaxy S7 that arrives as a dead phone, hangs on logo, or falls into a boot loop after a drop can trace back to cracked or lifted joints under the CPU, and reballing becomes the fix once your diagnosis confirms the processor package. You lift the CPU with a hot air station, clean the pads with a soldering station and flux, and inspect the footprint under a microscope. Clamp the board in a PCB holder so it stays flat, set the Qianli QS49 BGA stencil over the pads, and apply the balls or paste. After reflow, check continuity and rails with a multimeter before you close the phone. Skipping that last check risks a second teardown.
Build the Bench Around It
Reballing sits inside a wider Samsung repair routine, and the right neighbouring tools make it faster. Stock your bench with Hot Air Stations and Soldering Stations for removal and cleanup, Reballing Kits for paste, balls and flux, Microscopes for inspection, and PCB Holders for stable work. Multimeters confirm your results after reflow. Once the hardware passes, Test Boxes handle the software side of the job, while ISP Pinout Tools, eMMC Programmers and UFS Adapters cover storage-level recovery when the fault goes beyond the processor. This page states the verified model, chip family, and device scope up front, so you order the correct stencil the first time. Mechanicpk stocks these categories for Pakistani repair shops and service centers, so you can match the stencil with the rest of your setup in one order.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated Qianli Bumblebee stencil, model QS49
- ✓Square holes with rounded angles for BGA reballing
- ✓Covers Exynos 8890 and Qualcomm MSM8996 CPU boards
- ✓Fits the Samsung Galaxy S7 series, including S7 Edge
- ✓Fixed aperture layout removes freehand ball spacing
- ✓Sturdy build that holds precision over repeated use
- ✓Updated treatment and newer materials for easier, more precise work
- ✓Slim stencil sheet for board-side reballing on your bench
Specifications
| Brand | Qianli |
|---|---|
| Model | QS49 |
| Category | BGA Reballing Stencil |
| Compatibility | Samsung Galaxy S7 series, Exynos 8890 and Qualcomm MSM8996 CPU Universal Series |
| Supported Devices | Samsung Galaxy S7 and S7 Edge (G9300, G9350, G9308, G930F) |
| Technology | Square holes with rounded angles, BGA stencil |
Common Repair Uses
- ✓Samsung Galaxy S7 series CPU reballing and board-level rework.
- ✓CPU reballing after lifting a Samsung S7 processor
- ✓Restoring ball layout after CPU removal with a hot air station
- ✓Pad preparation before CPU re-installation
- ✓Reballing work on a dead phone after diagnosis points to the CPU
- ✓Repair attempts on hang on logo and boot loop faults tied to CPU joints
- ✓Exynos 8890 board rework on S7 and S7 Edge
- ✓MSM8996 board rework on S7 series variants
- ✓Repeat reballing jobs in repair shops and service centers
Compatible Devices
- ✓Verified scope is the Samsung Galaxy S7 series, built for Exynos 8890 and MSM8996 CPU boards.
- ✓Samsung Galaxy S7 (Exynos 8890 board)
- ✓Samsung Galaxy S7 Edge (Exynos 8890 board)
- ✓Samsung SM-G930F
- ✓Samsung SM-G9300
- ✓Samsung SM-G9308
- ✓Samsung SM-G9350
- ✓Exynos 8890 CPU family
- ✓Qualcomm MSM8996 CPU family
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the QS49 stencil for Galaxy S10 because the name says SAM10?
Does the Qianli QS49 cover both Exynos 8890 and MSM8996 boards?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



