Relife RL-223-OR Flux Paste 100g – Lead-Free BGA Flux

₨ 2,000

Lead-Free No-Clean BGA Flux

Relife RL-223-OR flux paste gives your bench a 100 g jar of lead-free flux for soldering and reballing BGA, PGA and SMD components on phone mainboards. High viscosity keeps the paste on the pad under hot air, and high activity drives fast, clean tinning with minimal smoke. The no-clean formula leaves no residue, so you move straight from reflow to testing. Use it for IC rework, pad repair and reballing jobs on dead phones, charging issue boards and general hardware faults. Mechanicpk supplies the RL-223-OR to workshops and service centers that need a dependable mainboard-level soldering consumable.

Out of stock

14 People watching this product now!
Description

Relife RL-223-OR Flux Paste for Lead-Free BGA Rework

Relife RL-223-OR flux paste ships in a 100 g jar and targets lead-free soldering and reballing of BGA, PGA and SMD components on phone mainboards. High viscosity keeps the paste in place on the pad, and high activity pulls solder into a clean, wetted joint. The formula leaves no residue, so you skip the cleaning pass after reflow. The 100 g size gives shops that reball boards every day enough stock to work through many jobs before reordering. Mechanicpk stocks it for technicians who need a dependable consumable at mainboard level, not a device-specific accessory.

Technical Profile: Viscosity, Activity and Residue

The RL-223-OR combines two properties that matter at board level. Viscosity controls how the paste behaves under hot air: a thicker paste resists slumping and drifting, so a thin layer stays on the pad while you place a stencil or a chip. Activity controls wetting: the paste reduces oxidation on pads and solder surfaces, which lets lead-free solder flow and tin quickly. Relife lists the paste as lead-free and no-clean, and it produces little smoke while you work. Fast tinning shortens heat exposure on each pad, which protects the board and the chip from unnecessary thermal stress. A clean finish also keeps your microscope view clear, because a leftover film hides small defects on dense mainboards. The paste suits PCB work broadly, so the same jar covers a reballing job in the morning and a pad repair in the afternoon.

Relife RL-223-OR Flux Paste in the Repair Workflow

Most technicians reach for flux paste at the same points in an IC job. After you lift a BGA or CPU with a hot air station, you tin the pads with a soldering station and braid, spread a thin coat of RL-223-OR, and reball through a stencil. Apply the paste sparingly: a thin, even layer beats a heavy blob, because excess paste spreads under heat and pushes small parts out of position. Hold your airflow low and keep the nozzle moving so the paste activates evenly. During reflow, the paste holds each ball in position and helps it collapse onto its pad. The same jar supports PGA work and SMD replacement, from small passives on a charging circuit to larger chips tied to a dead phone, a boot loop issue or a hardware fault. Pair it with a reballing kit and a PCB holder, and keep a microscope on the board to check ball alignment before you heat. After reflow, a multimeter check on the affected lines confirms continuity before you close the device.

Why Technicians Stock the 100 g Jar

A 100 g jar suits workshops that reball daily, because you stop reordering small syringes mid-week. You take what you need with a spatula, so you control the amount on every pad. Keep the lid closed between jobs to protect the paste from dust. Shops that handle a steady mix of charging issue, display problem and network issue repairs touch boards every day, and each rework job needs flux. The RL-223-OR gives you high viscosity, high activity and no-clean behavior in one jar, which makes it a practical default for volume work. If your jobs move toward finer pad pitches or a different flux type, browse the other Relife flux and solder paste options in the soldering consumables category alongside our hot air stations, soldering stations and test boxes.

Additional information
Weight0.100 kg
Q & A
Please login to post questions

Key Features

  • Lead-free flux paste formula
  • No-clean formula with no residue
  • High viscosity holds position under hot air
  • High activity for fast, clean wetting
  • Quick tinning with minimal smoke
  • Suits BGA, PGA and SMD soldering and reballing
  • 100 g jar for daily workshop volume
  • Works on phone mainboards and general PCBs

Specifications

BrandRelife
ModelRL-223-OR
CategoryFlux Paste / Soldering Consumables
CompatibilityBGA, PGA and SMD components on phone mainboards and PCBs
TechnologyLead-free, no-clean, high viscosity, high activity
Weight100 g (net)
Dimensions65 × 75 × 60 mm (package)

Common Repair Uses

  • Reballing, tinning and component re-soldering at mainboard level
  • BGA reballing
  • PGA component soldering
  • SMD component replacement
  • IC change karna on phone mainboards
  • Pad tinning after IC removal
  • Reflowing cold or weak solder joints
  • Hardware fault repair on dead phone boards
  • Charging circuit component rework

Compatible Devices

  • Universal mainboard-level consumable — not device-specific; suited to phone mainboards and PCBs carrying BGA, PGA and SMD parts
  • Mobile phone mainboards (all brands, not device-specific)
  • BGA components
  • PGA components
  • SMD components
  • General PCBs
  • Lead-free soldering workflows
  • Hot air station rework
  • Stencil reballing setups

FAQ

What is the product name?
The product name is Relife RL-223-OR Flux Paste 100g.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-223-OR.
What is this product used for?
This product is used for lead-free soldering and reballing of BGA, PGA and SMD components on phone mainboards and PCBs.
Which devices are compatible with this product?
This product works as a universal mainboard-level consumable for phone mainboards and PCBs with BGA, PGA and SMD components. It is not tied to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is Relife RL-223-OR flux paste lead-free?
Yes. The RL-223-OR is a lead-free flux paste designed for lead-free soldering and reballing.
Do I need to clean the board after using Relife RL-223-OR flux paste?
The RL-223-OR is a no-clean formula that leaves no residue, so it does not require a cleaning pass after soldering.