TE-172 4-in-1 360° Rotary Universal Repair Fixture
₨ 6,500
TE-172 Universal Rotary Fixture
The TE-172 gives your repair bench a 4-in-1 multi-purpose holding platform with full 360-degree rotation. You lock a device at the exact angle the job demands, then keep both hands free for the iron, tweezers or hot air nozzle. The universal layout skips model-specific holders, so one fixture covers back cover work, inspection under the microscope and soldering setups across most phone sizes that fit the clamp opening. If your workshop handles dead phone, charging issue and display problem jobs every day, the TE-172 cuts repeated hand-holding and speeds up each setup. Mechanicpk supplies the TE-172 to technicians, repair shops and service centers across Pakistan.
Out of stock
TE-172 Rotary Fixture for Bench-Level Phone Repair
The TE-172 universal rotary fixture for mobile repair puts a single holding platform on your bench that rotates through 360 degrees and combines four holding functions in one body. You stop tilting a phone by hand while you work. You set the device at the angle the repair needs, lock it, and keep your hands on the soldering iron, tweezers or pick. For technicians who run a steady flow of hardware fault jobs, that stability separates a clean repair from a slipped component.
360-Degree Rotation and the 4-in-1 Layout
The TE-172 pairs a full rotary action with a four-in-one multi-purpose layout, and that combination defines its value on a busy bench. You rotate the held device to face the iron, the hot air nozzle or the microscope, then lock it in place. Rotation removes the awkward wrist angles that cause slipped tweezers and burnt fingers during IC change karna jobs. The vice-clamp style grip keeps the device steady while you apply pressure, so your hands stay free for the actual repair. Because the fixture works as a universal tool, you skip the separate holder for each phone family. You adjust the clamp to the device in front of you and move to the next job.
Repair Workflow Fit
Every repair starts with a stable position, and the TE-172 sits at that first step. You hold a phone body during back cover separation, steady a housing or board assembly that fits the clamp opening, or angle a device under the microscope for close inspection. When the job moves into soldering or rework, you pair the fixture with your hot air station or soldering station and keep the work zone predictable. Technicians who handle dead phone, charging issue, display problem and hang on logo cases daily gain the most, because repeated setups add up across a full shift. A workshop that sees Samsung, Oppo, Vivo, Infinix and Tecno devices in the same afternoon covers that range with one tool, as long as each device fits the clamp opening.
Rotation helps most on tight corners, edge components and flex connector areas. You turn the device toward your line of sight instead of leaning over the bench, which reduces neck strain and improves accuracy on small parts. The four-in-one design also saves bench space, which matters in compact Pakistani repair shops where every inch already carries a microscope, a station or a programmer.
Buying and Bench-Setup Notes
Check your most common device sizes against the clamp opening before you order, since the fixture holds what fits and nothing beyond it. Tighten the clamp evenly, support the device before you release the lock, and rotate slowly while flux or solder paste sits on a board so nothing shifts. Keep the clamp surfaces clean so grit never scratches frames or housings.
The TE-172 completes a bench alongside reballing kits, hot air stations, soldering stations, multimeters and microscopes. When your work moves toward glue removal and cleaning on CPU and NAND chips, add a dedicated PCB holder to your setup and keep the TE-172 for general holding, back cover work and inspection. Mechanicpk supplies the TE-172 to technicians, service centers and training institutes across Pakistan, so you can stock the same fixture for every bench in your workshop.
| Weight | 1.0 kg |
|---|
Key Features
- ✓360-degree rotary action
- ✓4-in-1 multi-purpose design
- ✓Universal fixture layout for mixed-brand workshops
- ✓Vice-clamp style holding grip
- ✓Frees both hands for soldering and rework
- ✓Reduces awkward wrist and neck angles on small parts
- ✓Saves bench space with one multi-function tool
- ✓Suits repair shops, service centers and training institutes
Specifications
| Model | TE-172 |
|---|---|
| Category | Fixture & PCB Stand |
| Compatibility | Universal multi-purpose fixture, not locked to a single phone model |
| Technology | 360-degree rotary action, 4-in-1 multi-purpose design |
Common Repair Uses
- ✓Holding and angling devices during bench-level repair work
- ✓Back cover separation and reassembly
- ✓Holding a device steady during soldering setups
- ✓Positioning a device under the microscope for inspection
- ✓Hot air rework on components within reach of the clamp
- ✓Board cleaning and tin removal setups
- ✓Charging port and connector repair access
- ✓Display problem and screen-side repair positioning
- ✓General multi-angle holding during hardware fault diagnosis
Compatible Devices
- ✓Universal scope — any phone, housing or board assembly that fits the clamp opening
- ✓Universal fixture, not locked to one phone model
- ✓Android smartphone bodies that fit the clamp opening
- ✓iPhone bodies that fit the clamp opening
- ✓Back covers and housings within the clamp opening
- ✓Motherboard assemblies that fit the clamp opening
- ✓Small tablets that fit the clamp opening
- ✓Devices from mixed brands on the same repair bench
- ✓Devices needing angled access under a microscope
FAQ
What is the product name?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the TE-172 rotate a full 360 degrees?
Can I use the TE-172 for different phone brands on the same bench?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



