Sunshine SS-C210-I Soldering Iron Tip for T210 Handle
₨ 800
Sunshine C210-I Soldering Tip for T210
The Sunshine C210-I soldering tip gives your T210, T26 or S210 handle a straight, fine-point integrated cartridge for micro-soldering. The heating core and tip share one body, so heat reaches the joint fast and recovers quickly between pads. Multilayer nano-electroplating resists oxidation, and the stainless steel housing limits heat loss along the shaft. You fit it to a compatible handle and start working. On the mobile repair bench, it handles jumper wires, trace repair, SMD passives and connector pin touch-ups on dead phone boards. Mechanicpk stocks it as a direct consumable replacement for technicians who run C210-interface stations every day. Pair it with a microscope and a hot air station for complete board-level rework.
In stock
Sunshine C210-I Soldering Tip for Precision Board-Level Work
The Sunshine C210-I soldering tip puts a straight, fine-point integrated cartridge on your T210-class handle. Heating core and tip form one body, so heat travels a short path to the solder joint instead of crossing a separate element-to-tip junction. If you already run a T210, T26 or S210 handle, this tip replaces a worn or oxidized cartridge directly. The SS-C210-I model code identifies the I-type shape within the Sunshine C210 series, which also includes the bent IS tip and the K-type tip.
Integrated Cartridge Design and Plating
Sunshine builds the SS-C210-I as an integrated heating-core cartridge. The stainless steel housing reduces heat loss along the shaft, and the manufacturer-stated heat-up figure is roughly one second to heat and two seconds to tin. Multilayer nano-electroplating coats the working surface. This plating resists oxidation and corrosion, which keeps solder wetting cleanly across repeated heat cycles. The cartridge measures about 80 x 3.5 x 3.5 mm and weighs about 2.5 g, so the handle stays light during long microscope sessions. Distributors also list the tip as lead-free compatible, which matters when you rework newer boards.
Where the I-Type Tip Fits in a Repair Workflow
The fine straight point suits precise, small-area work. You use it for jumper wire soldering, trace repair, SMD resistor and capacitor replacement, and pad cleanup after a component swap. On a charging issue board, you can touch up a damaged pad or rebuild a lifted trace without bridging neighbouring pins. On a dead phone with a hardware fault near a flex connector, the fine point lets you reflow individual pins under a microscope. The I-type tip does not replace a hot air station for BGA and large shielded ICs. It complements one: you remove the chip with hot air, then clean and tin the pads with this tip. A multimeter confirms continuity after the joint cools, and a PCB holder keeps the board steady while you work. If you plan IC-level work, add reballing kits to the same bench.
Handle and Station Compatibility
The SS-C210-I fits Sunshine T210, T26 and S210 handles. Distributors also list it for JBC T210-style handles and for Sugon and GVM stations that use the same C210 interface. Before you order, confirm your handle uses the C210 cartridge format, because T245 and C245 cartridges use a different, larger body and will not fit. Technicians who run several tip shapes keep an I tip for fine work, an IS tip for angled access and a K tip for drag-style joints, then swap them on the same handle. Mechanicpk supplies the full range of soldering stations, microscopes, hot air stations and test tools around this consumable, so you build the complete bench from one source.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Straight fine-point I-type tip shape
- ✓Integrated heating core and tip in one cartridge
- ✓Manufacturer-stated 1-second heat-up and 2-second tinning
- ✓Stainless steel housing to limit heat loss
- ✓Multilayer nano-electroplating for oxidation and corrosion resistance
- ✓Lead-free solder compatible
- ✓Fits T210, T26 and S210 handles
- ✓Lightweight cartridge of about 2.5 g for long microscope sessions
Specifications
| Brand | Sunshine |
|---|---|
| Model | SS-C210-I |
| Category | Soldering Iron Tips |
| Compatibility | T210, T26 and S210 handles (C210 series interface) |
| Technology | Integrated heating core and tip with multilayer nano-electroplating |
| Material | Nano-electroplated copper with stainless steel housing |
| Dimensions | Approx. 80 x 3.5 x 3.5 mm |
Common Repair Uses
- ✓Fine-point micro-soldering on mobile phone mainboards.
- ✓Jumper wire soldering on broken traces
- ✓Trace repair on charging and display lines
- ✓SMD resistor and capacitor replacement
- ✓Pad cleanup and tinning after IC removal
- ✓Charging port pad touch-up
- ✓FPC connector pin touch-up under a microscope
- ✓Through-hole component soldering
- ✓Solder bridge removal between fine-pitch pins
Compatible Devices
- ✓Handle and station compatibility only. The tip is universal across phone brands and not tied to specific phone models.
- ✓Sunshine T210 handle
- ✓Sunshine T26 handle
- ✓Sunshine S210 station handle
- ✓JBC T210 precision handle (C210 interface)
- ✓Sugon T210-style handles
- ✓GVM T210-style handles
- ✓Other soldering stations that use the C210 cartridge interface
- ✓Universal across phone brands, including Samsung, Oppo, Vivo, Infinix, Tecno and iPhone boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the Sunshine C210-I fit JBC T210 handles?
What is the difference between the C210-I, C210-IS and C210-K tips?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



