2UUL PW31 PortCheck Pro Tail Plug Detector
₨ 4,800
PW31 Tail Plug Detector
The 2UUL PW31 PortCheck Pro is a tail plug detector for mobile repair that tests Type-C and Lightning charging interfaces without opening the device. You plug it into the port and it reads the charging connection automatically. A large colour screen shows the result: blue marks a normal value and red flags an open circuit. The built-in 300mAh battery keeps the unit ready on your repair bench, and the pocket-sized body (77x36x13mm, 25g) fits in a toolkit. Use it on a dead phone, a charging issue or a no-charge complaint to separate a port or tail plug fault from a deeper board fault before you pick up the hot air station.
In stock
Tail Plug Detector for Mobile Repair: PW31 PortCheck Pro
Every charging complaint starts with one question: is the fault in the tail plug, the port, or the board? The 2UUL PW31 PortCheck Pro answers it fast. This tail plug detector for mobile repair plugs into a Type-C or Lightning interface and reports the connection state on its own screen, so you diagnose a charging issue without disassembly. For Pakistani repair shops that handle high volumes of “charging nahi ho raha” jobs, that saves bench time on every ticket.
How the Auto-Detect Workflow Works
You insert the PW31 into the device’s charging interface, and the detector checks the connection automatically. No manual probing, no multimeter leads on tiny pads. The display uses colour to separate results: blue indicates a normal value and red indicates an open circuit. Pull the plug and the unit returns to standby by itself. This plug-and-read routine suits a bench where you test dozens of phones a day and need a consistent first check before any teardown.
Where It Fits in Your Charging Fault Diagnosis
Run the PW31 as your first-line test. A clean blue reading points you away from the port and toward the charging IC, the battery connector or the power path on the PCB. A red reading on an open line tells you to inspect the tail plug flex, the port solder joints or the connector pins. That quick split keeps you from reflowing a port that works fine, and from replacing a tail plug on a board that has a real hardware fault. It also gives you a clear, visible result to show a customer who asks why the repair costs what it does.
Built for the Bench and the Field
The 300mAh built-in battery means the detector needs no cable, adapter or power source at the bench. The body measures 77x36x13mm and weighs 25g net, so it sits in a pocket or a tool tray without taking space. The listed charging input is 5V 2A. The same unit covers both interface types, which suits shops that see iPhone, iPad and Android jobs through the same counter and want one tester for all of them.
Choosing the PW31 Over Other PortCheck Models
The PortCheck line includes other 2UUL units. The PW32 targets Type-C diagnostics with PC display sync and real-time charging detection, and the PW33 PortCheck Pro II adds a built-in battery variant. The PW31 stays the straightforward choice when you want a standalone, screen-based Type-C and Lightning tail plug check with no computer attached. Pair it with a good multimeter and a hot air station from Mechanicpk and you cover the full port-to-board diagnostic chain, from tail plug flex to charging IC.
| Weight | 0.25 kg |
|---|
Key Features
- ✓Disassembly-free automatic detection of charging faults
- ✓Works with both Type-C and Lightning interfaces
- ✓Large screen for clear measurement data
- ✓Colour coding: blue for normal, red for open circuit
- ✓Built-in 300mAh battery for cable-free use
- ✓One-button on/off with plug-and-test operation
- ✓Auto standby after you remove the plug
- ✓Pocket-sized 25g body for bench or field use
Specifications
| Brand | 2UUL |
|---|---|
| Model | PW31 PortCheck Pro |
| Category | Tail Plug Detector / Charging Port Tester |
| Compatibility | Type-C and Lightning interfaces |
| Technology | Automatic plug-in detection with colour display (blue = normal, red = open circuit) |
| Input Voltage | 5V |
| Power Rating | 5V 2A charging rating |
| Dimensions | 77 x 36 x 13 mm |
| Weight | 25 g (net) |
| Battery Capacity | 300 mAh (built-in) |
Common Repair Uses
- ✓Charging fault diagnosis on phones, tablets and laptops
- ✓Checking a charging issue without disassembly
- ✓Finding an open circuit on a charging interface
- ✓Separating tail plug or port faults from board faults
- ✓Dead phone first-check before board repair
- ✓Testing a replacement tail plug before final assembly
- ✓Quick bench triage on iPhone and Android jobs
- ✓Verifying a port after cleaning or reflow
- ✓Spotting damaged or loose charging pin connections
Compatible Devices
- ✓Any device with a Type-C or Lightning charging interface
- ✓iPhone (Lightning models)
- ✓iPad (Lightning models)
- ✓Android phones with Type-C ports
- ✓Tablets with Type-C ports
- ✓Laptops with Type-C ports
- ✓Type-C and Lightning tail plug flex assemblies
- ✓Mobile phones and tablets generally
- ✓Universal tool, not tied to one brand
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the PW31 work on both Type-C and Lightning ports?
What do the blue and red colours on the PW31 screen mean?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



