2UUL SC09 CPU Fever Patch for Mobile Repair (50 Pcs)

₨ 900

2UUL SC09 CPU Thermal Patch

The 2UUL SC09 CPU fever patch for mobile repair gives your bench a pre-cut silicone heatsink pad that sits on a freshly reworked CPU or IC and pulls heat off the chip surface during testing. Each pad measures 17mm x 15mm x 1.5mm, and every box holds 50 pieces. The pad conducts heat and insulates electrically, so it sits safely on a PCB near bare joints. Use it after hot air reflow, CPU reballing and IC change karna jobs, while you run boot, flash and diagnostics checks. One box serves repair shops, service centers and training labs that handle Apple and Android boards every day.

In stock

18 People watching this product now!
Description

CPU Fever Patch for Mobile Repair: Thermal Control After Rework

The 2UUL SC09 CPU fever patch for mobile repair gives your bench a pre-cut silicone heatsink pad measuring 17mm x 15mm x 1.5mm. You lay it over a freshly reworked CPU, memory or power IC, and it draws heat away from the chip surface while you test the board. Each box holds 50 pads, so you can apply a fresh one on every CPU reflow, reball or IC change karna job without rationing stock. Mechanicpk supplies the SC09 to technicians and shop owners who want a repeatable thermal control step after hot air or BGA work.

Silicone Heatsink Pad Construction and Thermal Behavior

The SC09 uses a heatsink silicone pad that fills the tiny gaps between a hot component and the surface above it. That contact lets heat from high-power CPUs and GPUs travel into the pad instead of building up on the die. The material conducts heat and insulates electrically, so a pad resting near exposed traces and solder joints does not open a short path across your PCB. The manufacturer describes the pad as resistant to both high and low temperatures, which helps it keep its shape through repeated bench cycles. Treat it as passive heat spreading, not active cooling. It supports stable thermal conditions during testing and does not replace a correct reflow profile or a clean solder job.

Where the SC09 Fits in Your CPU and BGA Rework Workflow

A typical CPU repair runs in a fixed order: you lift the chip with a hot air station, clean the pads, reball, reflow, and then power the board for testing. The SC09 slots into that last stage. Once the CPU sits on the board, you place a pad on top and run your boot, flash and diagnostics checks. Heat-related symptoms such as hang on logo, random restarts and boot loop issue often surface during this window, and a pad helps you separate a real hardware fault from plain heat buildup. Technicians who revive a dead phone after a CPU change use the same routine: place the pad, power up, watch the behavior, and decide whether the board needs more rework. Pair the SC09 with a stable soldering station, a reballing kit, a microscope for joint inspection and a PCB holder, and you cover the full chain from chip removal to final test.

Pad Size, Pack Count and Bench Handling

Each pad measures 17mm x 15mm x 1.5mm, a footprint that covers common phone CPU packages and many other IC chips. The box contains 50 pieces and weighs about 52g net, so it fits in a workshop drawer next to your other soldering consumables. You apply and remove the pad by hand, which keeps your tweezers free for the next component on the board. Suppliers list the SC09 for Apple and Android phones, tablets, SSD and IC chips, and high-power LED modules, so a single box serves a mixed repair queue. Check the pad against your chip footprint before you place it, and keep it clear of connectors and shield contact points. For repair shops, service centers and training institutes, the 50-piece pack keeps a consistent thermal step available across every technician’s bench.

Additional information
Weight0.52 kg
Q & A
Please login to post questions

Key Features

  • Pre-cut 17mm x 15mm x 1.5mm silicone pad
  • 50 pads per box
  • Fast heat dissipation from CPU and IC surfaces
  • Thermal conduction with electrical insulation
  • High and low temperature resistance
  • Fills tiny gaps between chip and contact surface
  • Suits Apple and Android phone boards
  • Applies and removes by hand during testing

Specifications

Brand2UUL
ModelSC09
CategorySoldering Accessories / Thermal Pads
CompatibilityUniversal — not device-specific; suits phone CPU, IC chip and SSD chip applications
TechnologyThermal conductive, electrically insulating silicone heatsink pad
MaterialSilicone
Dimensions17mm x 15mm x 1.5mm per pad; 50 pcs per box
WeightApprox. 52g net per box

Common Repair Uses

  • Post-rework heat control on CPUs and ICs during board testing
  • Cooling a CPU after hot air reflow
  • Thermal control after CPU reballing
  • Heat spreading after IC change karna
  • Boot and flash testing on a freshly reworked board
  • Diagnosing hang on logo after a CPU change
  • Separating heat buildup from a real hardware fault
  • Covering SSD and IC chips during repair testing
  • Insulated heat spreading near bare PCB joints

Compatible Devices

  • Universal scope — Apple and Android phones and tablets (not limited to specific models)
  • Apple iPhone logic boards
  • Samsung phone and tablet boards
  • Xiaomi phone boards
  • Huawei phone boards
  • Google Pixel boards
  • Other Android phone CPU and IC chips
  • SSD controller and IC chips
  • High-power LED modules and integrated chips

FAQ

What is the product name?
The product name is 2UUL SC09 CPU Fever Patch.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC09.
What is this product used for?
This product is used for spreading heat away from a CPU or IC chip after repair, during board testing.
Which devices are compatible with this product?
This product has universal compatibility and suits Apple and Android phone CPU and IC chips, tablets and SSD chips.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What size is each SC09 pad and how many come in a box?
Each pad measures 17mm x 15mm x 1.5mm, and each box contains 50 pads.
Does the SC09 pad conduct electricity on a bare PCB?
No. The pad conducts heat and insulates electrically, so it can sit near exposed traces and solder joints.