2UUL PW03 9V Electro-Release Alligator Clip
₨ 900
9V Electro-Release Alligator Clip for iPhone Batteries
The 2UUL PW03 is an electro-release alligator clip that loosens electrically activated battery adhesive without prying. It draws power through a Type-C input, delivers 9V at the clip end, and grips the battery’s release contacts with dual alligator jaws. Pair it with a 5–20V power bank or bench supply and you have a compact iPhone 16 battery removal tool for your bench. The flat 100 mm lead weighs 18 g, so it sits in any tool tray beside your tweezers and PCB holder. Mechanicpk stocks the PW03 for technicians and service centers across Pakistan.
In stock
2UUL PW03 Electro-Release Alligator Clip for Battery Adhesive Removal
The 2UUL PW03 electro-release alligator clip converts a standard Type-C power source into a 9V feed built for debonding electrically activated battery adhesive. Prying a glued battery risks a bent frame or a punctured cell, so this clip gives you a cleaner route: connect the jaws, apply voltage, and let the adhesive release. The dual alligator design and Type-C input suit bench setups where a power bank or bench supply is already within reach.
How the 9V Electro-Release Process Works
The PW03 takes power through its Type-C connector and outputs 9V at the alligator clips. Feed it from a power bank or power supply rated at 5–20V, because the clip needs a source in that range to work. You attach the two jaws to the battery’s adhesive-release contacts, and the current weakens the electro-release adhesive bond. The battery then lifts with far less force than a dry pry, which protects the frame, the flex cables, and the cell itself. The flat lead layout keeps the cable low on the bench, so it stays clear of your microscope stand and hot air nozzle.
Where the PW03 Fits in Your Repair Workflow
Battery separation sits at the start of most iPhone 16 and iPhone 16 Plus jobs. When a customer brings in a charging issue, fast battery drain, or a swollen cell, you remove the battery first, then move on to board work. The PW03 handles that first step. After release, you continue with your normal sequence: inspect the board under a microscope, check rails with a multimeter, rework with a soldering station or hot air station, and clamp the board in PCB holders. Technicians who run battery swaps all day save the most time, because every swap starts with the same clean release instead of a slow, careful pry.
Specifications That Matter at the Bench
The PW03 measures 100 mm and weighs 18 g net, so you carry it in a pocket or drawer without thinking about it. The 9V output and Type-C input match the power sources most workshops already own. Supplier information ties the tool to iPhone 16 and iPhone 16 Plus battery adhesive removal. Confirm the adhesive type before you use it on any other model, since the clip releases electrically activated adhesive only.
Mechanicpk supplies the 2UUL PW03 to Pakistani repair shops, service centers, and training institutes that want a precise, repeatable battery removal step. If you build out your bench with ISP pinout tools, test boxes, reballing kits, and soldering equipment, this clip completes the battery-handling side of that kit.
| Weight | 0.18 kg |
|---|
Key Features
- ✓Dual alligator clips grip the battery release contacts
- ✓9V output at the clip end
- ✓Type-C input for easy power connection
- ✓Works with a 5–20V power bank or power supply
- ✓Flat 100 mm lead stays low on the bench
- ✓18 g net weight for easy handling
- ✓Debonds electro-release adhesive without prying
- ✓Compact enough for any technician toolkit
Specifications
| Brand | 2UUL |
|---|---|
| Model | PW03 |
| Category | Mobile Repair Tools – Battery Adhesive Removal |
| Compatibility | Type-C power bank or power supply with 5–20V output |
| Supported Devices | iPhone 16, iPhone 16 Plus |
| Technology | Electro-release (electrically activated adhesive debonding) |
| Input Voltage | 5–20V via Type-C |
| Output Voltage | 9V |
| Dimensions | 100 mm |
| Weight | 18 g (net) |
Common Repair Uses
- ✓Battery adhesive release during phone disassembly
- ✓iPhone 16 battery replacement
- ✓iPhone 16 Plus battery replacement
- ✓Battery removal without prying or peeling by force
- ✓Battery swap for charging issue or fast-drain complaints
- ✓Swollen battery removal before board repair
- ✓Disassembly ahead of PCB-level inspection and rework
Compatible Devices
- ✓iPhone battery adhesive removal, verified for the iPhone 16 series
- ✓iPhone 16
- ✓iPhone 16 Plus
- ✓Any battery that uses electrically activated release adhesive (verify the adhesive type before use)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What power source does the 2UUL PW03 need?
Can I use the PW03 on phones other than iPhone 16 and 16 Plus?
Related products
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



