RF4 RF-SD35 Y0.6 Tri-Wing Screwdriver for iPhone Repair
₨ 999
RF4 RF-SD35 Y0.6 Tip for Phone Teardown
The RF4 RF-SD35 Y0.6 tri-wing screwdriver gives you a dedicated tip for the Y-shaped screws inside iPhone and Android handsets. RF4 builds the RF-SD35 as a mini precision screwdriver for phone disassembly, and this model carries a magnetic S2 alloy steel bit that grips micro screws while you lift them out of tight recesses. A laser-engraved label marks the size, so you pick the right tool from your bench without testing bits on a screw head. Use it for screen replacement, battery replacement, and general phone opening before board-level work. Mechanicpk supplies it to repair shops across Pakistan.
In stock
Y0.6 Tri-Wing Screwdriver Built for Precision Phone Repair
The RF4 RF-SD35 Y0.6 tri-wing screwdriver gives you a purpose-built tip for the small Y-shaped screws inside modern iPhone and Android handsets. RF4 positions the RF-SD35 as a mini precision screwdriver for phone teardown, and this Y0.6 model targets the tri-wing fasteners that a standard Phillips bit cannot grip. A mismatched bit rounds a screw head within seconds, so a dedicated tip protects the screw, the bracket, and the board underneath. Mechanicpk stocks this tool for technicians who open phones every day and need a bit that seats cleanly on the first turn.
Tip Geometry and Bit Material
Tri-wing screws, also called Y-type or tri-point screws, use three wings that meet at the centre of the head. The Y0.6 designation names the tip size, and matching that size to the screw decides whether the bit bites or slips. The RF-SD35 series uses magnetic S2 alloy steel bits, a tool-steel grade chosen for hardness, which helps the tip hold its profile across repeated screw removal and installation. The magnetic tip picks up the micro screw and holds it while you lower it into a tight recess, so you stop chasing loose screws across the bench. A laser-engraved label on the tool marks the size, which lets you identify the Y0.6 at a glance on a crowded workstation.
Where the Y0.6 Tip Fits in Your Repair Workflow
RF4 describes the RF-SD35 for phone disassembly, screen replacement, and battery replacement. In practice, you reach for the Y0.6 once the outer case is open and internal brackets or covers block access to the display connector or battery. You back out the tri-wing screws, lift the bracket, and carry on with the job. The same opening step starts many hardware fault repairs, such as charging issue, display problem, and dead phone cases, because you cannot inspect the board until the covers come off. Pair the screwdriver with a microscope and a PCB holder, and you can inspect the board closely before you decide on the next move. When the fault points to a component, you finish opening the phone with this tool, then move to your soldering station or hot air station for IC change karna work. Keep the Y0.6 in your daily roll, because a clean teardown keeps the screws, brackets, and flex connectors undamaged and ready for reassembly.
Why Technicians Choose a Dedicated Y0.6 Model
Multi-bit kits force repeated bit swaps, and every swap costs time and risks a lost bit. A dedicated Y0.6 model keeps the right tip in your hand for the job. RF4 builds the RF-SD35 family around single-purpose models, with +1.5, Y0.6, +2.5, 0.8, T2, and 1.2 options, so you can assemble a bench set that matches the screws you meet most often. If you service iPhone and Android in volume, you mix the models to cover each screw type without compromising on fit. The mini form factor suits the close, precise movements that phone repair demands, and it slips into a workshop tool roll without bulk.
Buy the RF4 RF-SD35 Y0.6 from Mechanicpk if your bench handles regular phone teardowns and you want a clearly labelled tri-wing tip that you identify instantly. Check your target model’s screw type before ordering, and add the matching RF-SD35 sizes for the other fasteners you expect to meet.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Y0.6 tri-wing tip for Y-type phone screws
- ✓Magnetic tip holds micro screws during removal and installation
- ✓S2 alloy steel bit
- ✓Laser-engraved label for quick size identification
- ✓Mini screwdriver form for iPhone and Android phone repair
- ✓Suited to disassembly, screen replacement, and battery replacement
- ✓Belongs to the RF-SD35 family, with +1.5, +2.5, 0.8, T2, and 1.2 sibling models
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-SD35 (Y0.6 model) |
| Category | Precision Screwdrivers, Mobile Repair Hand Tools |
| Compatibility | iPhone and Android phones with Y0.6 tri-wing screws |
| Supported Devices | iPhone and Android phones |
| Technology | Magnetic tip, laser-engraved size label |
| Material | S2 alloy steel bit |
| Tip Size | Y0.6 (tri-wing) |
Common Repair Uses
- ✓Phone teardown and reassembly where tri-wing screws secure internal brackets and covers
- ✓Phone disassembly before board inspection
- ✓Screen replacement
- ✓Battery replacement
- ✓Bracket and cover removal
- ✓Opening dead phone and charging issue cases
- ✓Display problem repairs
- ✓Pre-work before IC change karna jobs
- ✓Reassembly after hardware fault repair
Compatible Devices
- ✓iPhone and Android phones that use Y0.6 tri-wing (Y-type) screws; the tool is not device-specific, so check the screw type on your target model
- ✓iPhone models with Y-type tri-wing internal screws
- ✓Android phones with Y-type tri-wing internal screws
- ✓Phone brands serviced in Pakistan, where the internal screw is tri-wing Y0.6
- ✓Other electronics that use Y-type tri-wing screws of matching size
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Y0.6 bit magnetic?
Can the Y0.6 tip remove Phillips screws?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



