YCS Maintenance Home Blade 3 Size Blade (9PCS)

₨ 1,200

YCS Blade Set for CPU Glue Removal

The YCS Maintenance Home Blade 3 Size Blade (9PCS) puts nine hand-polished blades in three sizes on your bench for CPU and NAND chip glue removal. You lift cured adhesive from the chip edge, clear residue from the board, and prep the area for reballing or IC change karna without scraping nearby components. The manufacturer builds the blades from imported material for a sharp, durable edge, and they pair with the YCS 9G handle. Mechanicpk supplies this set to Pakistani repair shops, service centers, and board-level technicians who need a dependable glue removal option for motherboard work.

In stock

20 People watching this product now!
Description

YCS Blade Set for CPU Glue Removal: 9 Blades in 3 Sizes

The YCS Maintenance Home Blade 3 Size Blade (9PCS) is a YCS blade set for CPU glue removal and NAND chip cleanup on smartphone motherboards. You get nine hand-polished blades across three sizes, so you match the edge to the gap instead of forcing one blade into every job. Mechanicpk supplies this set to Pakistani repair benches that handle IC-level work daily, from a dead phone with a glued CPU to a routine eMMC swap. The set gives you range for both fine control near small passives and bulk removal along thick corner glue. Clean glue removal protects the solder mask, the pads, and the capacitors sitting next to the chip.

How the three blade sizes fit your CPU and NAND rework workflow

Glue around a CPU or NAND chip never behaves the same way twice. Some boards carry a thin bead along the package edge, while others hold thick corner glue that has cured for years. Three blade sizes let you open a path with the narrowest edge, then step up to a wider blade to push through bulk adhesive. You heat the board with your hot air station first, soften the glue, and then work the blade along the chip perimeter in short, shallow strokes. This stage comes right before IC change karna: you clear the perimeter, lift the chip, and scrape the residue before you reball or reflow. Prepping this way protects the pads you still need for reballing. Start from a corner of the chip, because corner glue holds the package the longest. Once the first edge lifts, slide along the side and keep the cut shallow. If the blade drags, reheat the area instead of leaning harder. Check your progress under a microscope when the chip sits close to small capacitors.

Why technicians pick a mobile phone CPU glue removal blade set like this

The edge decides everything in glue removal. The manufacturer builds each blade from imported material with a hand-polished edge for durability, so you start every job with a sharp blade. Nine blades in one pack means you rotate to a fresh edge mid-session rather than push a dull one through underfill. That matters on a busy bench where one blade can handle CPU lifting in the morning and NAND cleanup in the afternoon. You also cover adjacent jobs with the same pack: motherboard CPU delamination, glue cleanup on storage chips, keyboard maintenance, and general electronic circuit repair. A dead phone, a hang on logo fault, or a charging issue that traces back to a glued IC all start with the same step: clear the adhesive cleanly and see the chip edge before you commit more heat. Handling stays simple. Hold the blade by its handle, anchor your wrist on the bench, and feed the edge into the glue line with small movements. Wipe the blade clean between passes so residue does not drag across the pads. Store the blades flat after the session so the edge stays ready for the next board.

Where this set sits in your repair bench

Use the blades alongside your Hot Air Stations and Soldering Stations for the heat step, and under a Microscope for edge-clearance checks near small passives. After the chip lifts, move to Reballing Kits and PCB Holders to keep the board steady. When the job involves eMMC or UFS recovery, the same bench pairs with eMMC Programmers, UFS Adapters, ISP Pinout Tools, and Test Boxes, and a Multimeter confirms rail continuity before you power the board. As a NAND chip glue removal tool, this set fills the first step of that chain. The YCS 9G handle, a 9-gram handle with a non-slip textured finish, suits long sessions where a heavier holder tires your hand. Buyers who build a workshop from scratch often start with blades, a handle, and a hot air station, then add programmers once IC change karna work grows.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Nine blades in one set
  • Three blade sizes for different glue gaps
  • Hand-polished blade edge
  • Imported material for a durable edge
  • Built for CPU and NAND chip glue removal
  • Handles hard drive glue and motherboard CPU delamination
  • Pairs with the lightweight YCS 9G handle
  • Suits shops, service centers, and board-level technicians

Specifications

BrandYCS
ModelMaintenance Home Blade 3 Size Blade (9PCS)
CategoryMobile Repair Tools – Glue Removal Blades
CompatibilityUniversal – not device-specific; pairs with the YCS 9G handle
Supported DevicesSmartphone and tablet motherboards, electronic circuit boards
MaterialImported material, hand-polished blade edge

Common Repair Uses

  • Glue removal and board prep before and after chip-level rework
  • CPU chip glue removal before lifting
  • NAND and eMMC chip glue removal
  • Underfill and residue scraping around BGA chips
  • Motherboard CPU delamination
  • Board cleaning after chip removal
  • Pad prep before reballing
  • Hard drive glue removal
  • Keyboard maintenance and general electronic circuit repair

Compatible Devices

  • Universal – not device-specific; suited to board-level work on chips with cured glue or underfill
  • Smartphone motherboards with glued CPU chips
  • Smartphone motherboards with glued NAND and eMMC chips
  • Tablet motherboards
  • Electronic circuit boards with glued ICs
  • BGA chips with hard glue or underfill around the package
  • Hard drive boards with glue residue
  • Keyboard assemblies needing maintenance cleanup
  • Other digital device PCBs requiring controlled glue removal

FAQ

What is the product name?
The product name is YCS Maintenance Home Blade 3 Size Blade (9PCS).
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is Maintenance Home Blade 3 Size Blade (9PCS).
What is this product used for?
This product is used for glue removal around CPU and NAND chips on phone motherboards and other electronic circuit boards.
Which devices are compatible with this product?
This product is universal and not device-specific. It works on any board where you need to remove glue or residue around chips.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can this blade set remove glue around CPU and NAND chips?
Yes. The manufacturer lists this blade set for mobile phone CPU and NAND chip glue removal, along with motherboard CPU delamination and other electronic circuit repair.
Does this blade set work with the YCS 9G handle?
Yes. YCS sells these blades alongside the YCS 9G handle, a 9-gram handle with a non-slip textured finish. This listing covers the 9-piece blade set.