YCS MY-CK01 Mr.Yang CPU Degumming Knife Set (10 Pcs)

₨ 800

YCS MY-CK01 Degumming Knife Set

The YCS MY-CK01 from the Mr.Yang range puts ten CPU degumming knives on your repair bench in one set. You use them to cut underfill glue around CPU and BGA chips, scrape old tin from pads, and pry ICs loose on mobile phone and tablet motherboards. Ten pieces mean you swap in a fresh blade when one wears down, so a glue-heavy board does not stall your queue. Pair the set with a hot air station and a microscope for controlled work on dead phone boards. Mechanicpk supplies the MY-CK01 to technicians, repair shops, and service centers across Pakistan.

In stock

18 People watching this product now!
Description

CPU Degumming Knife Set for Mobile Repair: YCS MY-CK01 Overview

A CPU degumming knife set for mobile repair earns its place on the bench the moment a board arrives with black underfill glue around the processor. The YCS MY-CK01, sold under the Mr.Yang name, packs 10 degumming knives into one set, so you stop sharing a single worn blade across every job. Mechanicpk stocks it for Pakistani technicians who handle CPU, BGA, and IC work on mobile phone and tablet motherboards, from a quick chip lift to a full glue clean-up before reballing.

Where the MY-CK01 Fits in Your Rework Workflow

Underfill glue sits between the chip and the PCB, and you clear it before you lift a CPU or memory IC. The usual sequence runs in four moves. You warm the chip area with a hot air station, cut and scrape the edge glue with the knife, work the blade under the chip edge, and lift the IC once the solder softens. After the chip comes off, you scrape leftover glue and old tin from the pads so the board is ready for reballing or a replacement IC. The MY-CK01 covers the glue and tin stages of that sequence, which is where careless blade work can lift pads. Mount the board in a PCB holder and keep a microscope above it, so your hand stays steady and you see every pad you clean.

What the 10-Piece Set Gives Your Bench

Hardened epoxy wears an edge quickly, because you drag the blade across it again and again. A set of ten lets you rotate in a fresh knife instead of forcing a tired one, and you can dedicate separate pieces to glue cutting, tin scraping, and prying so one task never dulls the blade you need for the next. Workshops with several technicians can split the set across benches and keep every station supplied. Service centers that process boards daily can stock the pack as a consumable alongside flux, solder wick, and reballing kits.

Matching the Tool to the Repair

Most jobs that reach this knife start with a symptom: a dead phone, a hang on logo, a boot loop issue, or a charging issue that traces back to a board-level fault. When the diagnosis points to a CPU or a NAND chip, IC change karna begins with glue removal, and the quality of that step decides whether the pads survive. Hold the blade flat against the board, take light passes, and stop to check the pad surface under magnification instead of pushing through stubborn glue. After you clean the pads, test continuity with a multimeter before you place the new chip. If you replace an eMMC or UFS chip, you reprogram it with an eMMC programmer, an ISP pinout tool, or a UFS adapter, so a complete bench pairs the degumming knives with those tools plus a soldering station for the final reflow.

The MY-CK01 suits technicians who want a simple, replaceable-blade approach to glue work without buying a full hand-engraving kit. Start with this set for everyday CPU degumming. As your volume grows, add a stronger hot air station, a stereo microscope, and a dedicated reballing kit to handle the whole chip-off process in-house.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • 10-piece set for continuous bench use
  • Designed for CPU degumming and glue removal
  • Handles tin scraping on motherboard pads
  • Supports IC removal and BGA chip prying
  • Suits mobile phone and tablet motherboard work
  • Sold under the Mr.Yang MY-CK01 model name
  • Replaceable pieces for rotating fresh edges
  • Fits workflows with hot air stations and microscopes

Specifications

BrandYCS (Mr.Yang)
ModelMY-CK01
CategoryCPU Degumming / Glue Removal Knives
CompatibilityUniversal hand tool, not device-specific
Supported DevicesMobile phone and tablet motherboards
Pack Quantity10 pieces per set

Common Repair Uses

  • CPU and IC rework on mobile phone and tablet boards
  • CPU underfill glue removal
  • BGA chip prying and removal
  • IC disassembly
  • Tin and solder paste scraping from pads
  • Motherboard delamination
  • Pad cleaning before reballing or IC replacement

Compatible Devices

  • Universal CPU, BGA, and IC glue removal scope (not tied to a single phone brand or chipset)
  • Mobile phone motherboards
  • Tablet motherboards
  • CPU chips with underfill glue
  • BGA chips
  • IC chips and memory ICs
  • Solder pads after chip removal

FAQ

What is the product name?
The product name is YCS MY-CK01 Mr.Yang CPU Degumming Knife Set (10 Pcs).
What is the brand of this product?
The brand of this product is YCS, sold under the Mr.Yang name.
What is the model of this product?
The model of this product is MY-CK01.
What is this product used for?
This product is used for CPU glue removal, tin scraping, and IC removal on mobile phone and tablet motherboards.
Which devices are compatible with this product?
This product is a universal hand tool for mobile phone and tablet motherboards, and it is not limited to one brand or chipset.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can the MY-CK01 pry a CPU chip, or does it only remove glue?
The set serves CPU glue removal, tin scraping, and IC removal, so you can use it to clear underfill glue and to work under a chip edge once heat softens the solder.
Should I heat the board before using a CPU degumming knife?
Technicians warm the chip area with a hot air station first so the glue and solder soften, then work the blade in with light passes. Set temperature and airflow to suit your board and chip.