2UUL SM01 Dual SIM Checker for Mobile Repair
₨ 1,100
Dual SIM Slot Testing Board
2UUL SM01 Dual SIM Checker gives technicians a fast way to confirm whether both SIM channels on a dual-SIM phone are reading correctly. The board seats in the SIM tray and its test routes let you check each slot without any software setup, which makes it a quick first step before you open a device. It measures 49.6 × 16 × 4.3 mm and weighs about 12.5 g, so it fits easily in a tool roll or on a bench. Use it to screen SIM slot and reader faults, verify route continuity after board work, and check refurbished handsets before they leave your counter.
In stock
The 2UUL SM01 Dual SIM Checker is a dual SIM checker for mobile repair built around one job: confirming that both SIM channels on a handset read the card correctly before you commit time to deeper diagnostics. Many no-service and “SIM not detected” complaints come from the SIM tray, the connector, or the signal route to the baseband rather than from the baseband itself, and a dedicated tester lets you separate those possibilities quickly. Insert the board into the card tray, follow the test routes, and you get a direct read on whether signal passes through both slots. Because the board needs no software installation or driver setup, it works at a service counter or on a bench while a customer waits. Its compact footprint of 49.6 × 16 × 4.3 mm and roughly 12.5 g weight means it adds almost nothing to your tool roll. The same test board is also marketed for route-level short circuit screening, which helps when a SIM fault looks like a shorted line rather than a failed chip. In a board-level workflow, the checker belongs at the front end of triage. Run it before removing shields, before reballing a SIM connector, or before replacing a SIM IC, so you do not swap parts that were never faulty. After repairing a dual-SIM phone, run it again to confirm that both slots work, not only the one you were working on. Refurbished and second-hand phones are another natural fit. Resellers and buyback operations need a fast pass or fail on SIM functionality before they grade a device, and this board delivers that without a full diagnostic session. Pakistani service centers handling a mix of local and imported dual-SIM handsets face the same screening problem every day, and a repeatable test at intake removes guesswork from the first decision on each job. The tool is simple, and its value comes from using it consistently at the start and end of every job. Keep one on each bench, add it to your intake checklist, and log any slot that fails so you can separate tray wear from board faults over time. Technicians who run board-level SIM work often pair it with Microscopes for inspecting tray pads, Multimeters for continuity checks on suspect lines, and PCB Holders to keep the handset stable during probing. When a dual SIM fault traces back to the chipset or to power rails, move on to Test Boxes and ISP Pinout Tools for the next level of diagnosis. Used this way, the 2UUL SM01 shortens diagnosis, reduces unnecessary part swaps, and gives your team a repeatable first test for every dual-SIM device that crosses the bench.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Tests both SIM channels of a dual-SIM slot on a single board
- ✓Includes route signal short circuit testing according to the product listing
- ✓Runs without software installation or driver setup
- ✓Compact board measuring 49.6 × 16 × 4.3 mm
- ✓Weighs approximately 12.5 g, easy to carry in a tool roll
- ✓Supplied as a single tester board under the 2UUL brand
- ✓Suits intake screening of second-hand and refurbished phones
- ✓Designed for quick bench use at a service counter or in the workshop
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL SM01 Dual SIM Checker |
| Technology Entity | Dual SIM card slot route testing board |
| Compatible Device Entities | Dual-SIM smartphones (general scope, not device-specific) |
| Repair Process Entity | SIM slot and SIM reader fault screening, route continuity check |
| Industry Entity | Mobile phone repair tools, SIM card tools |
Common Repair Uses
- ✓Checking SIM slot and SIM reader circuits on no-service or “SIM not detected” complaints
- ✓Verifying both SIM channels after board-level repair on dual-SIM phones
- ✓Testing SIM tray signal routes for open or short circuits
- ✓Screening second-hand and refurbished phones before resale or grading
- ✓Narrowing a SIM fault to the tray, connector, or board before replacing an IC
- ✓Confirming SIM functionality at intake before a customer approves a repair
Compatible Devices
- ✓Dual-SIM smartphones with dual SIM card trays (general scope, not device-specific)
- ✓SIM slot and card tray circuits in dual-SIM handsets
- ✓iPhone SIM tray circuits, as referenced in the marketplace product title (no model-level list published by the supplier)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this tool test both SIM slots on a dual SIM phone?
Does this checker need software or drivers to run?
Related products
Flash 64 Ultra Tool Box full set – UFS eMMC ISP Programmer
In stock
UFI UFS-Prog UFS and eMMC Programmer for Mobile Repair
In stock


