Relife RL-044 15in1 XM1-XM15 Stencil – Xiaomi CPU Reballing
₨ 8,500
Relife RL-044 Xiaomi Stencil Set
The Relife RL-044 15in1 XM1-XM15 Stencil packs 15 numbered 0.12 mm steel plates into one set for reballing Xiaomi, Redmi and Mi series CPUs. Each plate carries round-square holes cut to a specific ball layout, so you tin a chip in one pass instead of placing balls one at a time. The set covers Qualcomm Snapdragon boards from the MSM8974 and MSM8998 generations up to the Snapdragon 845. Pick the plate that matches your chip, hold the board in your PCB holder, heat with your hot air station, and lift clean, uniform balls. Mechanicpk supplies this Relife RL-044 Xiaomi stencil set to Pakistani repair shops and service centers.
In stock
Relife RL-044 Xiaomi Stencil for Snapdragon CPU Reballing
The Relife RL-044 15in1 XM1-XM15 Stencil gives your bench one set that covers a wide span of Xiaomi, Redmi and Mi boards. This Relife RL-044 Xiaomi stencil set ships 15 individually numbered steel plates, each 0.12 mm thick and cut with round-square holes that follow a specific chip’s ball grid. Instead of hunting for a new plate every time a different model lands on your bench, you match the chip on the board to the plate number and start reballing. The sections below cover what each verified plate fits, where the set sits in a CPU repair workflow, and what to check before you order.
Plate Coverage Across Mi and Redmi Boards
Each plate in the XM1-XM15 range targets one chip footprint, so the plate number decides whether a model fits. XM1 covers the Mi 6 series and Mi Mix 2 with the MSM8998 chip. XM2 covers the Mi 3, Mi 3S, Mi Note and Mi 4 series boards that run MSM8974, MSM8274 or MSM8674. XM6 serves the Redmi Note 5, Redmi Note 5 Pro, Mi Note 3 and Mi 6X on Snapdragon 636 and 660. XM7 handles the Mi 5X, Mi Max 2, Redmi Note 4X, Redmi 4, Redmi 4A, Redmi 5 Plus and Redmi S2. XM8 matches the Mi 5, Mi 5S, Mi 5S Plus, Mi Note 2 and Mi Mix. XM9 fits the Mi 8, Mi 8 SE and Mi Mix 2S, which carry the Snapdragon 845. Check the chip marking and ball layout against the plate before you heat anything.
Where the Stencil Fits in Your CPU Repair Workflow
A dead phone, a boot loop issue or a Redmi that hangs on logo after a drop can trace back to cracked CPU solder joints, and the fix ends with a reball. You lift the chip with your hot air station, clean the pads with your soldering station and desoldering wick, then clamp the board in a PCB holder so nothing shifts. Under your microscope, align the plate with the pads, press solder paste through the holes, and heat until the paste forms balls. Let the board cool, lift the plate, inspect every ball, then place the CPU back and reflow. Check continuity with your multimeter before you reassemble.
Run your diagnostics first. Rule out a software marna or flash fix, check current draw on the dead board, and commit to the hardware fault repair only when the readings point at the CPU or its joints. This stencil handles the tinning stage of that chain, so pair it with a reballing kit, flux and a stable hot air setup to finish the IC change cleanly.
Build and Design Details
Relife cuts this Xiaomi BGA reballing stencil range from steel at 0.12 mm and shapes the holes as round squares, which helps the plate release paste cleanly after heating. The brand calibrates each mesh against real phone drawings, so ball positions follow the chip’s actual layout. Relife rates the RL-044 range for high temperatures without deformation, which matters when you reuse one plate across dozens of boards. Numbered plates keep the set organised: you grab XM7 or XM9 by its marking instead of measuring pitch on every job.
Before you order, list the Xiaomi and Redmi models that cross your bench most often and match them against the plates above. The set suits shops that handle Snapdragon-era Mi and Redmi boards regularly. If you also reball other brands, check your multimeter, microscope and PCB holder stock so the bench stays complete. Mechanicpk supplies the Relife RL-044 Xiaomi stencil set to repair shops, service centers and training institutes across Pakistan.
| Weight | 0.1 kg |
|---|
Key Features
- ✓15 individually numbered steel plates, XM1 to XM15, in one set
- ✓0.12 mm steel construction
- ✓Round-square holes that help paste release
- ✓Plates calibrated against real phone drawings (RL-044 range)
- ✓Covers Xiaomi, Redmi and Mi boards with Qualcomm Snapdragon CPUs
- ✓Works with standard hot air stations and preheaters
- ✓High-temperature rating without deformation (RL-044 range)
- ✓Numbered plates let you pick the right chip layout fast
Specifications
| Brand Entity | Relife |
|---|---|
| Product Entity | Relife RL-044 15in1 XM1-XM15 Stencil |
| Technology Entity | BGA reballing, steel stencil, round-square hole design |
| Compatible Device Entities | Xiaomi Mi series, Redmi series, Qualcomm Snapdragon (MSM8998, MSM8974, 636/660, 845) |
| Repair Process Entity | CPU reballing, IC change, PCB-level repair |
| Industry Entity | Mobile repair industry, Pakistan |
Common Repair Uses
- ✓Verified scope: CPU-level reballing on Xiaomi and Redmi boards
- ✓CPU reballing after chip removal with a hot air station
- ✓Re-tinning pads and chip balls after an IC change
- ✓Repairing dead phone faults caused by cracked CPU solder joints
- ✓Fixing boot loop and hang on logo faults traced to CPU joints
- ✓Reballing Snapdragon CPUs on Mi and Redmi boards
- ✓Restoring ball uniformity after board cleaning
- ✓Workshop-level hardware fault repair on Xiaomi mainboards
- ✓Training technicians on BGA reballing with numbered plates
Compatible Devices
- ✓Verified scope: Xiaomi, Redmi and Mi series boards with Qualcomm Snapdragon CPUs, by plate number
- ✓Mi 6 series and Mi Mix 2 (XM1, MSM8998)
- ✓Mi 3, Mi 3S, Mi Note and Mi 4 series (XM2, MSM8974/8274/8674)
- ✓Redmi Note 5 and Redmi Note 5 Pro (XM6, Snapdragon 636/660)
- ✓Mi Note 3 and Mi 6X (XM6, Snapdragon 636/660)
- ✓Mi 5X, Mi Max 2 and Redmi Note 4X (XM7)
- ✓Redmi 4, Redmi 4A, Redmi 5 Plus and Redmi S2 (XM7)
- ✓Mi 5, Mi 5S, Mi 5S Plus, Mi Note 2 and Mi Mix (XM8)
- ✓Mi 8, Mi 8 SE and Mi Mix 2S (XM9, Snapdragon 845)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Xiaomi chipsets does the Relife RL-044 XM1-XM15 set cover?
Can I use the XM1-XM15 plates with a hot air station?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



