C115 Sugon/Aifen/JBC Handle Only – Soldering Station Handle
₨ 3,000
Replacement C115 Handle for Sugon and Aifen Stations
The C115 Sugon/Aifen/JBC Handle Only is a replacement grip for C115 fine-tip soldering on mobile boards. It has a metal shell with 304 stainless steel construction and comes in 5-pin and 6-pin connector versions for Sugon and Aifen 115-series stations. Use it for SMD components, fine-pitch IC pads and small-joint rework where tip control matters most. Swapping in a new handle restores accurate tip placement without replacing the whole station. This is a handle-only part, so it ships without tips or a stand. Confirm your station’s connector and tip series before ordering.
Out of stock
C115 Soldering Handle for Sugon Aifen Stations
The C115 Sugon/Aifen/JBC Handle Only is a soldering station handle built for the C115 tip series, the fine-tip range used for precision SMD work and small-component rework on mobile boards. For a technician who already runs a 115-series station, the handle carries the heat to the joint, so its fit and tip-to-grip geometry decide how accurately you place the iron. This handle is supplied as a standalone replacement, so you buy it when the original handle cracks, loses its cable connection or wears through its grip. You keep your station running without replacing the whole unit. Sold as handle only, it contains no tips, stand or station, so confirm your tip series before ordering.
Where This Handle Fits in Your Repair Workflow
Within mobile repair, the C115 range sits in the middle of the workflow. A technician reaches for these fine tips after the board has been inspected under a microscope, when IC pins, capacitors, resistors and connector pads demand careful heat control rather than brute force. Your repair bench uses this handle most during SMD component replacement, fine-pitch IC removal and pad cleaning. Charging port rework and small-joint reflow on logic boards also rely on this level of control. Precision matters more here than raw wattage, so a handle that sits steadily in your hand helps you keep each joint clean.
Connector Styles and Station Matching
The shell is metal with 304 stainless steel construction, which suits regular bench use. Two connector styles are offered, a 5-pin version and a 6-pin version, and the connector type must match the socket on your station before you buy. Check your station model against the compatibility notes. Supplier listing data states that the AIFEN C115 handle is intended for Sugon and Aifen 115-series stations and is not a substitute for JBC 115-series handles. Count the pins on your existing handle and compare them with the listing before you confirm your order. If your station uses a different connector layout, choose the version that fits the socket rather than forcing a fit.
Tip Selection and Bench Care
Your choice of tip shape affects how the handle performs, so match a blade or chisel C115 tip to the component and pad layout you are working on. Keep the cable in good condition, since a loose or damaged cable causes intermittent heating that is hard to trace on a board. Inspect the cable after long sessions and replace it if the insulation shows wear. Store the handle in a holder when not in use so the tip seat and cable stay protected. This handle is a practical, specification-led replacement for technicians who need a fit-for-purpose grip rather than a full station change.
| Weight | 0.25 kg |
|---|
Key Features
- ✓Replacement handle for the C115 tip series
- ✓Metal shell with 304 stainless steel construction
- ✓Available in 5-pin and 6-pin connector versions
- ✓Handle-only part, with no tips or station included
- ✓Built for Sugon and Aifen 115-series stations
- ✓Suited to fine SMD and small-joint soldering
- ✓Supports precise tip placement on dense boards
- ✓Supplied as a standalone replacement part
Specifications
| Brand Entity | Sugon, Aifen, JBC (station ecosystems) |
|---|---|
| Product Entity | C115 soldering station handle |
| Technology Entity | C115 tip series, 5-pin and 6-pin connector styles |
| Compatible Device Entities | Sugon and Aifen 115-series soldering stations |
| Repair Process Entity | SMD soldering, fine-pitch IC rework, pad cleaning |
| Industry Entity | Mobile repair tools, PCB repair equipment |
Common Repair Uses
- ✓Fine-pitch SMD component soldering and replacement
- ✓Small IC pin rework and removal on mobile boards
- ✓Pad cleaning and resoldering on connector pads
- ✓Charging port rework on logic boards
- ✓Small-joint reflow and jumper work
Compatible Devices
- ✓Sugon and Aifen 115-series stations, C115 tip series, 5-pin and 6-pin connector stations
- ✓C115 series soldering tips
- ✓Sugon 115-series soldering stations
- ✓Aifen 115-series soldering stations
- ✓5-pin connector soldering stations
- ✓JBC-style 6-pin connector soldering stations
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does this handle work on a genuine JBC 115-series station?
Which tips does this handle use?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



