Mijing MJ-217A (35g) Lead-Free BGA Solder Paste
₨ 1
MJ-217A Solder Paste for Clean BGA Joints
The Mijing MJ-217A is a 35g tin paste for high-temperature BGA and SMD work on phone motherboards. It is lead-free and halogen-free, and its silver-bearing formula gives you bright, uniform solder beads on CPU, NAND and other BGA chips. The fine particle grade spreads evenly through a reballing stencil, so you can lay down consistent balls without bridging. The paste resists oxidation, so it stays workable on the bench for longer than thinner pastes. Use it for ball placement, pad re-tinning or touch-up reflow when your job calls for a 217-class paste. Pair it with a stencil, a hot air station and a suitable flux cleaner to complete the process.
Out of stock
MJ-217A Solder Paste: Where It Fits in Your BGA Workflow
The MJ-217A solder paste from Mijing is a higher-temperature option in the 217-class family, and it earns its place when you reball or re-tin a board. If you work on phone motherboards every day, you know a stencil only performs as well as the paste you push through it. This paste is made for that stage of the job, where you lay down clean, consistent solder before the chip meets heat. Whether you handle CPU ICs, NAND flash or other BGA packages, the paste sets the quality of every joint you create. The sections below cover what the paste contains, how it handles on the bench and how to fit it into a standard reballing process.
Composition and Lead-Free Formulation
The MJ-217A is lead-free and halogen-free, so it suits workshops that follow stricter handling and disposal rules. The tin mixture includes silver, which adds conductivity and produces a bright finish on the joint. You can see that difference when a bead reflows into a clean, rounded shape rather than a dull, grainy one. The paste uses a fine particle grade, which helps it flow through small stencil openings without clogging. Its 217-class melting range makes it a good choice when a job calls for a higher-temperature paste instead of a lower-temperature option. Check the container label each time you open a new 35g pack, so you always know which temperature class you are using before you start the job.
Bench Handling and Application
Start by letting the paste reach room temperature before you open the container. Cold paste thickens and spreads unevenly, and that leads to missing or oversized balls. Apply a small amount onto the stencil and spread it with a squeegee or a plastic card until every opening fills completely. Lift the stencil straight up so the pattern does not smear. Because the paste resists oxidation, you can keep it workable a little longer than many budget pastes, but you should still reseal the container tightly after each session. Clean the stencil right away, since dried residue can block the openings on your next job. For precise placement, work with small amounts rather than loading the whole stencil at once.
Reflow and Joint Quality
Reflow decides whether the paste bonds cleanly to the pads. Use a hot air station with a steady, even heat profile, and hold the nozzle at a consistent height so the whole chip reaches temperature together. Watch the solder as it melts. A well-formed joint shows a smooth, shiny surface and round balls that sit evenly on each pad. Dull or grainy joints often point to overheating, too little flux or contaminated pads. Once the board cools, clean it with an appropriate flux remover and inspect the joints under a microscope. A short inspection at this stage saves you from chasing an open connection after the phone is reassembled.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Lead-free and halogen-free formula
- ✓Silver-containing tin paste for bright, strong joints
- ✓217-class high-temperature melting range
- ✓Fine particle grade for stencil printing
- ✓Resists oxidation during bench use
- ✓35g container for repeated reballing sessions
- ✓Produces uniform, rounded solder beads
- ✓Suitable for CPU, NAND and BGA reballing
Specifications
| Brand | Mijing |
|---|---|
| Model | MJ-217A |
| Category | Solder Paste |
| Compatibility | Universal, not device-specific |
| Technology | Lead-free, halogen-free, silver-containing, 217-class high-temperature tin paste |
| Weight | 35 g |
Common Repair Uses
- ✓BGA reballing of CPU ICs
- ✓NAND flash reballing
- ✓Re-tinning pads before chip placement
- ✓Touch-up of cold or lifted BGA joints
- ✓Attaching replacement ICs after removal
- ✓Applying paste through stencils for uniform balls
- ✓Tinning SMD pads on motherboards
- ✓Reflow repair after hot air rework
Compatible Devices
- ✓Universal scope. Applies to BGA and SMD work on mobile phone motherboards, not tied to a specific model.
- ✓Mobile phone motherboard BGA packages
- ✓CPU ICs on smartphone motherboards
- ✓NAND flash BGA chips
- ✓Power management and RF BGA ICs
- ✓Other SMD chips on mobile PCBs
- ✓Stencil-based BGA reballing setups
- ✓Hot air and BGA rework stations
- ✓Universal, not device-specific
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the MJ-217A lead-free?
Can the MJ-217A be used for CPU and NAND BGA reballing?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



