RF4 RF-SD35 Convex Cross 2.5 Screwdriver
₨ 850
RF4 RF-SD35 Convex Cross 2.5 Driver
The RF4 RF-SD35 convex cross screwdriver gives your repair bench a dedicated 2.5 convex cross tip for precision phone teardown. RF4 builds the bit from S2 steel with a magnetic tip, so each small screw stays on the driver while you work. Embedded metal bearings keep the rotation stable and quiet, and the non-slip colored handle holds steady during long sessions. Use it for smartphone disassembly, screen replacement, battery replacement, and motherboard repair on iPhone and Android devices. Mechanicpk supplies this RF-SD35 driver to technicians, repair shops, and service centers across Pakistan who want the right bit for every screw head.
In stock
RF4 RF-SD35 Convex Cross Screwdriver for Precision Phone Teardown
The RF4 RF-SD35 convex cross screwdriver puts a dedicated 2.5 convex cross tip on your repair bench. Convex cross screws sit inside certain smartphones, and a mismatched bit rounds the screw head within seconds. A purpose-matched driver removes that risk before you start any display problem, charging issue, or hardware fault job. RF4 designs the RF-SD35 range around S2 steel bits, a magnetic tip, and a bearing-supported handle, so every screw leaves and returns to the board under control. Mechanicpk stocks this model for technicians who need the 2.5 convex cross size at the bench.
Key Technical Highlights
The bit uses S2 steel, a tool steel that RF4 rates up to HRC 60 hardness. That hardness lets the tip resist wear across repeated screw cycles, and the steel’s toughness lowers the chance of the tip snapping under torque. The magnetic tip grips each screw, which matters when you work with fasteners the size of a grain of rice above an open board.
Embedded metal bearings sit inside the handle. They keep the shaft turning smoothly and quietly, so you apply downward pressure with your palm and rotate with your fingertips without wobble. The non-slip handle and colored surface finish make the driver easy to find on a crowded bench, and the RF-SD35 range carries laser-engraved identifiers that help you separate tip types at a glance.
Repair Workflow Fit
Every phone repair starts with opening the device, and the screws decide how clean that first step goes. You use the 2.5 convex cross tip at the teardown stage for screen replacement, battery replacement, and mid-frame access. Once the shield and connectors lie exposed, the same driver supports motherboard-level work: you remove the board, clamp it in a PCB holder, and move to the microscope, hot air station, or soldering station for the actual fault. When a dead phone arrives with a charging issue or a hang on logo, a precise screwdriver keeps the case, screws, and threads intact, which protects the rest of the repair.
After rework, the same bit reinstalls the board and shields without cross-threading. A magnetic tip also helps when you carry small screws from the bench to the device. Pair it with a multimeter for pre-assembly checks and a reballing kit for board work, and you cover the full path from teardown to final assembly with dedicated tools at each step.
Why Technicians Choose This Driver
Matching the bit to the screw head protects the screw, the thread, and your reputation with the customer. A generic cross bit can slip in a convex cross head, so a dedicated 2.5 convex cross driver saves time on every job. Because RF4 sells the RF-SD35 tips as separate models, you replace only the tip that wears out instead of buying a full kit again. That approach suits shop owners who track tool cost per repair.
The RF-SD35 also works as a step up from unbranded drivers. You get S2 steel hardness, bearing-supported rotation, and a magnetic hold in a compact tool built for iPhone and Android teardown. Technicians who open phones daily notice the difference in grip and screw retention within the first few repairs. Keep one at each workstation and you stop sharing a single driver across benches, which keeps your workflow moving.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated 2.5 convex cross tip
- ✓S2 steel bit with hardness up to HRC 60
- ✓Magnetic tip for screw retention
- ✓Embedded metal bearings for stable rotation
- ✓Silent, non-slip operation
- ✓Colored surface finish
- ✓Laser-engraved identifier across the RF-SD35 range
- ✓Built for iPhone and Android teardown
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-SD35 |
| Category | Precision Screwdriver |
| Compatibility | Convex cross 2.5 screws; designed for iPhone and Android phone repair |
| Technology | Magnetic S2 steel bit with embedded metal bearings |
| Material | S2 steel bit |
Common Repair Uses
- ✓Verified workflows for the RF-SD35 range
- ✓Smartphone disassembly
- ✓Screen replacement
- ✓Battery replacement
- ✓Mobile motherboard repair
- ✓Precision screw removal and installation
- ✓Electronics repair
- ✓Computer precision maintenance
Compatible Devices
- ✓Verified scope is iPhone and Android smartphones with convex cross screws (2.5 size); the tool is screw-head-specific, not model-specific
- ✓iPhone devices with 2.5 convex cross screws
- ✓Android phones with 2.5 convex cross screws
- ✓Other precision electronics with 2.5 convex cross screws
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use a standard cross screwdriver instead of a convex cross 2.5 tip?
Does the RF-SD35 screwdriver have a magnetic tip?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



