RF4 RF-SD35 Screwdriver Pentagon 0.8mm Precision Tool

₨ 999

Precision Pentagon Screwdriver for Phone Teardown
The RF4 RF-SD35 Screwdriver Pentagon 0.8mm is a precision hand tool for opening five-point security screws during mobile phone disassembly. It carries a fixed 0.8mm pentagon tip made from S2 steel with hardness up to HRC 60, a magnetic tip that holds tiny screws, and a bearing handle that turns smoothly under a non-slip grip. You use it at the first step of display, battery, and charging port jobs, before the board comes out for diagnosis. Mechanicpk supplies the RF4 RF-SD35 to Pakistani repair shops and service centers that need a dependable pentagon 0.8mm screwdriver at the bench.

In stock

15 People watching this product now!
Description

Pentagon 0.8mm Screwdriver for Security-Screw Teardown

The RF4 RF-SD35 Screwdriver Pentagon 0.8mm is a pentagon 0.8mm screwdriver for technicians who open five-point security screws every day. RF4 builds the RF-SD35 series around S2 steel bits, and this model carries one fixed 0.8mm tip. The small five-lobe profile seats into the screw recess without wobble, so you open a device frame cleanly and keep the screws in reusable condition. Mechanicpk stocks it for repair benches that need a dedicated driver for this fastener instead of a multi-bit kit that stays in the drawer. Every technician in your shop who handles Apple repairs reaches for the same small driver first, and a tool built for this one job removes guesswork from the opening step. If your daily volume includes iPhone display, battery, and charging issue jobs, this tool covers the first step of every one of them.

S2 Steel Tip and Bearing Handle

RF4 specifies S2 steel for the RF-SD35 series, with bit hardness up to HRC 60. S2 resists chipping and wear at small tip sizes, which matters on a 0.8mm profile where each lobe is thin. A soft bit rounds off after a few dozen screws, and a rounded tip then damages the recess instead of turning the screw. The tip is magnetic, so it lifts and holds tiny screws while you work over an open frame. Embedded metal bearings sit inside the handle and keep the shaft turning smoothly, and the non-slip grip lets you control torque with your fingertips. You apply light downward pressure, turn, and the driver stays centered in the recess from the first rotation to the last. That control matters most on screws that already carry thread-locker residue or light corrosion, where a loose-fitting tip slips on the first turn. Hold the shaft vertically and let the bearing do the turning; forcing a sideways angle wears the lobes and shortens tip life.

Where It Fits in Your Repair Workflow

Five-point 0.8mm screws sit on the bottom edge of iPhone models from the iPhone 4 onward, so this driver handles the opening stage before any board-level work begins. After you open the enclosure, the job moves into diagnosis: you inspect the board under a microscope, isolate a hardware fault with a multimeter, and rework a faulty IC on a hot air station or soldering station. A dead phone that arrives with a suspected power fault, a display problem, or a charging port failure starts with the same step, and a stripped screw at that point costs you time you need for testing. Keep the driver beside your PCB holders so the opening, inspection, and rework stages stay within reach on one bench. Shops that run reballing kits and board-level repair benefit most, because a clean teardown protects the screws, brackets, and shields you refit at the end. Fewer damaged screws also means fewer customer complaints after delivery, which protects your shop reputation in a market where word of mouth drives repeat work.

What This Listing Covers

This listing sells one RF4 RF-SD35 Screwdriver Pentagon 0.8mm. The tip is fixed, so the driver does not accept bit swaps, and the other RF-SD35 tip types, including +1.5, Y0.6, +2.5, T2, and 1.2, are separate models. Many technicians assign one driver per screw type, because a dedicated 0.8mm tool never picks up wear from other fasteners and always sits in the same spot on the bench. If your repair volume grows, a multi-bit precision set gives you an upgrade path, while the RF-SD35 pentagon driver stays the quick-grab tool for five-point screws. Service centers that run several technician stations usually buy one driver per station, so nobody waits for a shared tool during peak hours. Check the screw type on your target device before you order, and match the 0.8mm five-point profile to the fastener you plan to remove.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Fixed 0.8mm pentagon (five-point) tip for security screws
  • S2 steel bit with hardness up to HRC 60
  • Magnetic tip that holds tiny screws
  • Embedded metal bearings for smooth shaft rotation
  • Non-slip handle for fingertip torque control
  • Quiet rotation during use
  • Single dedicated driver, ready to grab at the bench
  • Part of the RF4 RF-SD35 precision screwdriver series

Specifications

Brand EntityRF4
Product EntityRF4 RF-SD35 Screwdriver Pentagon 0.8mm
Technology EntityS2 steel bit, magnetic tip, bearing handle
Compatible Device EntitiesiPhone, pentalobe (five-point) bottom screws
Repair Process EntityPhone disassembly, battery and display replacement, board access
Industry EntityMobile phone repair tools, Pakistan

Common Repair Uses

  • Opening phone enclosures that use 0.8mm five-point security screws
  • Battery replacement access
  • Display and screen assembly removal
  • Charging port repair
  • Speaker and microphone replacement
  • Logic board removal before IC rework
  • Dead phone teardown for board-level diagnosis
  • Cleaning and inspecting the board under a microscope
  • Reassembly and screw refit after repair

Compatible Devices

  • iPhone models that use 0.8mm five-point (pentalobe) bottom-edge screws, iPhone 4 onward
  • iPhone 4 and 4S bottom screws
  • iPhone 5, 5c, and 5s bottom screws
  • iPhone 6 and 6 Plus bottom screws
  • iPhone 6s to iPhone 8 series bottom screws
  • iPhone X to iPhone 11 series bottom screws
  • iPhone 12 and 13 series bottom screws
  • Other iPhone models with 0.8mm five-point bottom screws
  • Any device that uses a 0.8mm five-point fastener (confirm the screw type before removal)

FAQ

What is the product name?
The product name is RF4 RF-SD35 Screwdriver Pentagon 0.8mm.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-SD35.
What is this product used for?
This product is used for removing and refitting 0.8mm five-point security screws during mobile phone disassembly.
Which devices are compatible with this product?
This product is compatible with iPhone models that use 0.8mm five-point bottom screws, from the iPhone 4 onward.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I swap the tip on the RF-SD35 pentagon 0.8mm screwdriver?
No. This version has a fixed 0.8mm pentagon tip. The other RF-SD35 tips, including +1.5, Y0.6, +2.5, T2, and 1.2, are separate models.
What steel does the RF-SD35 pentagon 0.8mm bit use?
The RF-SD35 series uses S2 steel bits with hardness up to HRC 60, which resists wear at small tip sizes.