2UUL DA11 Hand Finish Sexy Blades Set for PCB Underfill

₨ 1,800

PCB Underfill Removal Blades

The 2UUL DA11 Hand Finish Sexy Blades Set gives you four purpose-matched PCB underfill removal blades and one sandblasted handle in a single compact kit. Each blade carries a dedicated job: Model S separates the CPU and NAND flash, Model E removes CPU glue, Model X clears chip edge glue, and Model Y cuts black underfill glue without hurting the motherboard. Repair shops stock this set because it covers the glue-removal stage before reballing or chip replacement with one grip and four edges. Order the 2UUL DA11 set from Mechanicpk for board-level phone repair across Pakistan.

In stock

14 People watching this product now!
Description

2UUL DA11 PCB Underfill Removal Blades for Board-Level Glue Cleanup

The 2UUL DA11 Hand Finish Sexy Blades Set delivers PCB underfill removal blades matched to the four glue tasks a phone motherboard throws at you. 2UUL names the blades S, E, X and Y, and each model targets one type of chip-side glue work, from separating the CPU and NAND flash to cutting black underfill without hurting the board. The kit includes four hand-finished blades and one handle, so you carry a single grip and swap edges as the repair demands. Pakistani technicians know the pattern: the chip lifts, the glue stays, and the pads suffer if the wrong tool touches them. Mechanicpk supplies the DA11 set to repair shops, service centers and training labs that handle underfilled CPU and NAND packages every day and need a repeatable, board-safe way to clear glue before and after hot air rework.

Four Blade Models, Four Glue Jobs

Model S separates the CPU and NAND flash, so you reach for it when two packages sit bonded together and need a clean split before either chip moves. Model E handles CPU glue removal on the motherboard IC and works across the package body where glue binds the chip down. Model X serves as the edge glue removal blade and clears the sealing glue that runs along chip borders. Model Y cuts the black underfill glue under and around a package without hurting the board. Splitting these jobs across four edges lets each blade do the task its shape suits, instead of forcing one general-purpose knife through every glue type. Technicians who change CPU or NAND packages weekly notice the difference quickly, because a matched blade shortens the cleanup step and lowers the risk of lifting a pad.

Hand-Finished Blades and a Sandblasted Handle

2UUL polishes each blade by hand to a sharp, smooth edge. The alloy gives the blades high rigidity and useful flexibility, and it resists wear and corrosion, so the edges keep working through repeated glue jobs on your bench. The handle follows a different process. Sandblasting leaves a fine, frosted texture on the alloy surface, and an electric current then builds a colored oxide layer on the metal. That finish gives you a comfortable, non-slip grip, which matters when you clear glue under a microscope for an hour at a stretch. One handle accepts all four blades, so the kit stays compact on a crowded repair bench. Because the handle takes every blade, you never hunt for a second tool mid-job, and your hand keeps the same angle and pressure from one blade to the next.

Where the DA11 Set Fits in Your Repair Workflow

Glue removal sits between chip lift-off and reballing. After a hot air station releases a CPU or NAND chip, leftover glue stays on the solder pads and along the chip edges. The DA11 blades clear that residue so your reballing kit and fresh solder meet clean copper. Clamp the board in a PCB holder, work under a microscope, and cut the glue in small, controlled strokes to protect the pads. Dead phone, hang on logo and boot loop issue jobs that trace back to a damaged CPU or NAND package often end in chip replacement, and clean pads decide whether the new chip seats properly. Pair the DA11 set with a soldering station for pad finishing, and move up to a higher-magnification microscope as your board work gets finer. Workshops that run several technicians on one bench line often standardize on one glue-removal set, so every board gets the same cleaning method and every pad gets the same care. Blades wear with use, so busy workshops keep a spare set on the shelf.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Four blade models in one kit: S, E, X and Y, each aimed at a specific glue task
  • Model S separates the CPU and NAND flash
  • Model E removes CPU glue from the motherboard IC
  • Model X clears glue along chip edges
  • Model Y cuts black underfill glue without hurting the motherboard
  • Hand-finished blade edges with a sharp, smooth cut
  • Alloy blades with high rigidity and flexibility, resistant to wear and corrosion
  • Sandblasted handle with a frosted, non-slip grip and a colored oxide layer

Specifications

Brand Entity2UUL
Product Entity2UUL DA11 Hand Finish Sexy Blades Set (4-in-1 blade set with handle)
Technology EntityHand-finished alloy blades, sandblasted oxide-coated alloy handle
Compatible Device EntitiesMobile phone motherboards, CPU packages, NAND flash chips, BGA chips
Repair Process EntityPCB underfill removal, CPU and NAND glue removal, pre-reballing pad cleaning
Industry EntityMobile phone repair, PCB repair, microsoldering, GSM repair

Common Repair Uses

  • Glue removal and pad cleaning around CPU, NAND and BGA chips on phone boards.
  • Separating the CPU and NAND flash
  • Removing CPU glue from the motherboard IC
  • Clearing edge glue around chips
  • Cutting black underfill glue
  • Cleaning solder pad glue before reballing
  • Preparing boards for CPU or NAND chip replacement
  • Cleaning residue after hot air chip removal
  • Board prep for dead phone, hang on logo and boot loop issue repairs

Compatible Devices

  • Universal, not device-specific. The set suits any mobile phone motherboard with underfilled or glued chips.
  • Mobile phone motherboards
  • Underfilled CPU packages
  • NAND flash chips bonded to the board
  • BGA chips with edge glue
  • CPU and NAND stacks that need separating
  • Boards with glue on solder pads
  • Chips with black underfill glue
  • Boards prepared for reballing

FAQ

What is the product name?
The product name is 2UUL DA11 Hand Finish Sexy Blades Set.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is DA11.
What is this product used for?
This product is used for PCB underfill removal, CPU and NAND glue removal, and chip edge glue cleaning on mobile phone motherboards.
Which devices are compatible with this product?
This product is universal and not device-specific. It suits mobile phone motherboards that carry glued or underfilled chips.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which blade in the 2UUL DA11 set separates the CPU and NAND flash?
Model S separates the CPU and NAND flash. Model E removes CPU glue, Model X clears chip edge glue, and Model Y cuts black underfill glue.
How many blades and handles come in the 2UUL DA11 set?
The set includes four blades and one handle.