Mijing GK12 Mini PCB Fixture Toughened Glass
₨ 4,000
Compact Glass Fixture for Hot Air Rework
The Mijing GK12 Mini PCB Fixture holds small mobile boards steady on a toughened insulated glass panel while you work with hot air. MiJing builds the GK series for iPhone, iPad, watch and other PCB mainboard repair, and the Mini model targets small boards and individual ICs. The high-temperature resistant panel wipes clean of flux, rosin and glue. A concealed threaded rod keeps welding oil off the threads. If your bench handles chip removal, glue cleanup and reballing prep, this PCB fixture for mobile repair Pakistan technicians rely on keeps the board locked in place so your hands stay free for the actual rework.
In stock
Mijing GK12 Mini PCB Fixture for Glass-Panel Board Holding
The Mijing GK12 Mini PCB Fixture gives your hot air rework bench a compact, heat-insulated clamping platform built around a toughened glass panel. MiJing positions the GK12 Mini as the small-board model in its GK glass fixture series. That makes it a practical pick when you handle iPhone logic boards, iPad mainboards and smartwatch PCBs. If you already run a hot air station and a soldering station, this fixture closes the gap between a loose board on the mat and a board that stays put while you work. Mechanicpk lists it for Pakistani repair shops that want a spec-driven PCB holder without paying for an oversized frame.
Key Technical Highlights
The glass panel resists high temperature, so the fixture tolerates the airflow you aim at a chip during removal. The GK series design lets angled hot air carry heat toward the underside of the chip, which supports cleaner lifts on CPU and NAND work. Flux, rosin and glue residue wipe off the smooth panel, so your bench stays clean between jobs. MiJing hides the threaded connecting rod inside the body. That keeps welding oil and rosin off the threads and keeps the clamp moving smoothly after months of daily use. These details define the GK range, and the GK12 Mini belongs to it.
Where It Fits in Your Rework Workflow
Clamp the board before you heat anything. You secure the mainboard, position the chip area over the glass, and bring in your hot air nozzle. This setup covers chip removal, glue cleanup around CPU and NAND packages, and the prep stage before reballing. Pair it with a Hot Air Station for controlled airflow, a Soldering Station for pad cleanup, and a Reballing Kit once the chip comes off. Test Boxes and Multimeters handle the diagnosis first, so the board reaches the fixture with a confirmed fault. A dead phone or a stubborn charging issue often ends in an IC change karna, and a firmly clamped board stops the hand drift that lifts pads. When a job needs a wider platform, a standard PCB Holder from the same category extends your reach.
Choosing the Mini Within the GK Range
The GK range runs from compact models like the GK12 Mini up to larger models like the GK17, so you match the fixture to your board size. Pick the GK12 Mini when your daily work centers on small boards and individual ICs. Move up the series when your bench regularly handles larger logic boards. The Mini also suits workshops that run several fixtures side by side, one per active repair, so each board stays clamped while you move to the next job. For a distributor-grade buying decision, the value sits in the glass panel, the concealed rod and the series-proven clamping layout rather than in extra accessories.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Toughened insulated glass panel
- ✓High-temperature resistant working surface
- ✓Compact GK12 Mini size for small boards and ICs
- ✓Glass surface wipes clean of flux, rosin and glue
- ✓Concealed threaded connecting rod
- ✓Design that supports angled hot air heating toward the chip underside
- ✓Suits iPhone, iPad and watch PCB mainboards
- ✓Part of the MiJing GK glass fixture series
Specifications
| Brand | MiJing |
|---|---|
| Model | GK12 Mini |
| Category | PCB Fixtures |
| Compatibility | iPhone, iPad, smartwatch and other PCB mainboards; general chip clamping |
| Technology | Toughened insulated glass panel, high-temperature resistant |
Common Repair Uses
- ✓Hot air rework and chip-level repair on small mobile boards
- ✓Hot air IC removal
- ✓CPU removal and refit
- ✓NAND chip removal
- ✓Glue removal around chips
- ✓Reballing preparation
- ✓Holding boards during soldering
- ✓Flux and rosin cleanup on the glass panel
- ✓Steady board holding during charging issue and dead phone repairs
Compatible Devices
- ✓Verified scope covers iPhones, iPads, watches and other PCB mainboards, plus chip clamping (universal, not model-specific)
- ✓iPhone logic boards
- ✓iPad mainboards
- ✓Smartwatch PCBs
- ✓Android phone mainboards
- ✓General PCB mainboards
- ✓CPU chips
- ✓NAND chips
- ✓Individual ICs during clamping
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the Mijing GK12 Mini handle hot air chip removal?
Does the Mijing GK12 Mini work for both iPhone and Android boards?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



