Mijing GK11 Mini PCB Fixture – Toughened Glass Holder
₨ 4,000
Mijing GK11 Mini Glass PCB Holder
The Mijing GK11 Mini PCB fixture holds a mobile motherboard steady on a toughened insulated glass panel while you solder, rework ICs, or remove glue. The Mini format keeps the GK series construction in a compact body that fits tight benches and microscope setups. Glass resists heat, so you can work close to the board without a plastic clamp softening under your hot air gun. Technicians who handle dead phone, charging issue, and hardware fault jobs use it to lock a board in place and keep both hands free for the iron, tweezers, and hot air station.
In stock
Mijing GK11 Mini PCB Fixture for Stable Motherboard Rework
The Mijing GK11 Mini PCB fixture gives your repair bench a compact glass-based clamp for holding mobile motherboards during soldering, IC rework, and glue removal. Mijing builds the GK series around a toughened insulated glass panel, and the Mini version keeps that construction in a smaller footprint. If you handle dead phone and hardware fault jobs every day, a board that stays put lets you work cleanly around heat-sensitive zones and neighbouring components.
Why Toughened Insulated Glass Matters on the Bench
Hot air rework puts a fixture through repeated heat cycles. Plastic and thin metal holders pass that heat straight into your hands or warp over time. The GK series uses a high-temperature-resistant toughened glass panel with heat-insulating properties. The panel keeps the contact area stable and protects the board from the cold, heat-conducting surface of a bare metal plate.
Glass also gives you a flat, clean reference surface. You see the board edge clearly, you position the chip area where your hot air nozzle needs to reach, and you clamp without the board rocking. For technicians who repair iPhone and Android logic boards side by side, that consistency saves setup time on every job.
Where the GK11 Mini Fits in Your Rework Workflow
Place the GK11 Mini between diagnosis and the final test. After you trace a fault with a multimeter and microscope, you clamp the board in the fixture and start the repair. Typical jobs include CPU and BGA chip removal, IC change karna on charging and display faults, tin soldering on pads, and underfill glue removal around a chip before you lift it.
The compact body suits a workshop where space runs short. Pair it with a hot air station for chip removal, a soldering station for pad cleanup, and a microscope for pad inspection. When you move on to reballing, the same fixture holds the board while you clean pads and prepare the surface for your reballing kit.
Choosing Between the GK11 Mini and the Wider GK Series
Mijing sells the GK line in several variants, including GK11 Mini, GK12 Mini, GK11, GK12, GK13, GK14, and larger models. The Mini versions suit technicians who want a smaller clamp for everyday phone boards. Larger models cover more varied board and chip sizes, and some higher models add features such as a rotating base for microscope work. Check the variant you need before ordering, because each model sits at a different point in the range.
Mechanicpk stocks Mijing fixtures for Pakistani repair shops that want a dependable PCB holder without bench clutter. If your workflow also needs ISP pinout tools, test boxes, or eMMC programmers, you can pair this fixture with those categories from the same store. The result is a bench where holding, heating, probing, and programming each have a dedicated tool.
| Weight | 0.35 kg |
|---|
Key Features
- ✓Toughened insulated glass panel
- ✓High-temperature-resistant construction
- ✓Compact Mini format from the Mijing GK series
- ✓Universal fit for mobile motherboards
- ✓Stable base for hot air gun and soldering iron work
- ✓Clamp design with mainboard and chip fixing slots
- ✓Clean, flat surface that keeps the board visible
- ✓Suits dead phone, charging issue, and hardware fault repairs
Specifications
| Brand | Mijing |
|---|---|
| Model | GK11 Mini |
| Category | PCB Holder / Motherboard Repair Fixture |
| Compatibility | Universal mobile phone motherboards |
| Technology | Toughened heat-insulating glass panel |
| Material | Toughened insulated glass |
Common Repair Uses
- ✓Holding boards and chips during heat-based repair work
- ✓Motherboard soldering
- ✓BGA IC rework
- ✓CPU chip removal
- ✓Glue and underfill removal around chips
- ✓Tin soldering and pad cleanup
- ✓Board holding under a microscope for inspection
Compatible Devices
- ✓Universal fixture scope for mobile phone motherboards (not locked to one brand or chipset)
- ✓iPhone logic boards
- ✓Android smartphone motherboards
- ✓Tablet (pad) motherboards
- ✓Smartwatch motherboards
- ✓Small-format PCBs that fit the clamp
- ✓BGA IC and CPU chip areas on mobile boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Mijing GK11 Mini suitable for hot air rework?
What is the difference between the GK11 Mini and the standard GK11?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



