Mijing BX-11 Universal Multimeter Probe
₨ 1
Mijing BX-11 Multimeter Probe Pen
The Mijing BX-11 multimeter probe pen gives your digital multimeter a finer, more flexible contact point for mobile board work. A low-resistance pure copper core, a gold-plated probe tip, and a soft anti-bend silicone lead keep your readings stable on crowded smartphone mainboards. Four replaceable ultra-fine needles sit inside the probe, so a bent tip never ends your session. The universal plug fits most multimeters, and the double-layer insulation protects your hands during live checks. Use it for continuity, voltage, and resistance tests on charging lines, battery connectors, and SMD pads.
Out of stock
Mijing BX-11 Multimeter Probe for Precision Board Testing
The Mijing BX-11 multimeter probe upgrades the weakest link in most repair benches: the contact point between your meter and the board. Mijing builds this probe pen around a pure copper core, a gold-plated tip, and a soft silicone lead, so your measurements stay consistent when you work on dense smartphone mainboards. If you search for a multimeter probe for mobile repair Pakistan technicians can trust on a daily bench, the BX-11 delivers fine-point access without forcing you to replace your existing meter.
Conductor and Insulation Design
The pure copper core keeps internal resistance low, which matters when you read small resistance values on power rails and when one weak reading decides whether a board survives. Double-layer insulation wraps the conductor and shields your hands during live checks. The super-soft silicone jacket resists bending and kinking, so the lead stays flexible after months of bench use. The lengthened wire gives you room to park the meter away from your hot air station and soldering area while you probe the board.
The plug end follows a universal design that suits most digital multimeters. Mijing fits it with a ceramic round head and a safety-minded internal structure, so the plug slides into and out of your meter jack smoothly. Check your meter’s jack style before you order, since the probe targets standard universal sockets.
Ultra-Fine Needle Tip for SMD Pads and Test Points
The gold-plated probe tip reaches the tight spots where standard meter probes fail: capacitor pads, battery connector pins, and test points between neighbouring components. Four replaceable ultra-fine needles come built into the probe. When a needle bends after hard probing, you swap it and keep working instead of buying a new probe. Pair the BX-11 with a microscope and a PCB holder, and you can land the tip on a single pad without bridging its neighbours.
Where the BX-11 Fits in Your Repair Workflow
Every hardware fault diagnosis starts with measurement. On a dead phone, you check the battery connector voltage, follow the charging line, and test continuity from the connector to the PMIC area. On a charging issue, you probe the charging port pads and the nearby capacitors for shorts. On a display problem, you verify the backlight and display supply lines before you commit to a hot air session. After an IC change, you confirm continuity on the replaced part before you reassemble the phone.
The BX-11 sits between the multimeter and the board, so it supports every other bench tool you own. You use it alongside your soldering station to confirm joints, with your hot air station to verify rework results, and with a test box or ISP pinout tool to probe pads before you connect them. If your current meter probes feel thick or stiff, this pen gives you a clear upgrade path from basic leads to a fine-point setup.
Why Technicians Choose a Dedicated Probe Pen
A multimeter body costs far more than its leads, yet the leads decide how accurately you reach the board. A dedicated probe pen with a replaceable needle gives you repeatable contact, a comfortable grip, and a flexible cable that does not fight your hands. For repair shops that handle many boards per day, the BX-11 keeps your measurement habit fast and your tip replacement cheap. Mechanicpk supplies it as part of a complete mobile repair tool range, so you can add it to the same order as your microscope, PCB holders, and soldering accessories.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Low internal resistance pure copper core
- ✓Gold-plated ultra-fine probe tip
- ✓Four built-in replaceable ultra-fine needles
- ✓Double-layer insulation for safer live checks
- ✓Super-soft silicone lead with anti-bend design
- ✓Lengthened wire for flexible bench placement
- ✓Universal plug that suits most digital multimeters
- ✓Ceramic round plug head for smooth insertion and removal
Specifications
| Brand | Mijing |
|---|---|
| Model | BX-11 |
| Category | Multimeter Probes and Test Leads |
| Compatibility | Universal plug for most digital multimeters |
| Technology | Pure copper core with double-layer insulation |
| Material | Pure copper core, soft silicone insulation, gold-plated probe tip, ceramic round plug head |
Common Repair Uses
- ✓Fine-point voltage, resistance, and continuity testing on mobile PCBs.
- ✓Battery connector voltage checks on dead phones
- ✓Charging line tracing and charging port pad testing
- ✓Continuity testing between ICs, connectors, and pads
- ✓Short-circuit hunting on power rails
- ✓Resistance checks on SMD components
- ✓Backlight and display supply line testing
- ✓Post-rework verification after IC change
- ✓Probing ISP and eMMC pads before tool connection
Compatible Devices
- ✓Universal, not device-specific. The probe works with digital multimeters that accept a universal plug and tests any smartphone mainboard with accessible pads or test points.
- ✓Digital multimeters with universal plug sockets
- ✓Samsung smartphone mainboards
- ✓Oppo and Vivo smartphone mainboards
- ✓Infinix and Tecno smartphone mainboards
- ✓Xiaomi and Realme smartphone mainboards
- ✓iPhone logic boards
- ✓Tablet and laptop PCBs with exposed test points
- ✓Phone charging boards and battery connector pads
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I replace the needle tip on the Mijing BX-11 when it bends?
Is the BX-11 suitable for probing SMD pads on a dead phone board?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



