2UUL RS148 Red Skull Solder Paste 148°C 50g

₨ 1,100

148°C Red Skull Solder Paste

The 2UUL RS148 solder paste brings a 148°C melting point to your BGA stencil reballing and SMD rework jobs. It belongs to the Red Skull range, which 2UUL builds in 138°C, 148°C, 183°C and 199°C grades, and RS148 sits between the low and mid-range options. The 50g pack suits technicians who reball CPUs, eMMC chips and other BGA ICs on dead phone boards. The paste targets clean ball formation with low residue, good conductivity and oxidation resistance. Mechanicpk supplies it to repair shops and service centers across Pakistan that need a dependable low-temperature paste at board level.

In stock

17 People watching this product now!
Description

2UUL RS148 Solder Paste for Low-Temperature BGA Reballing

The 2UUL RS148 solder paste gives your reballing bench a 148°C melting point inside the Red Skull series, which 2UUL builds in 138°C, 148°C, 183°C and 199°C grades. You choose RS148 when a board calls for a lower working temperature than the 183°C and 199°C pastes, and the grade sits above the 138°C option. Mechanicpk stocks the 50g pack for technicians who run BGA stencil reballing, SMD rework and motherboard-level repair every day, and who want a spec they can match to the job instead of one paste for everything.

Low-Temperature Behaviour in BGA Reballing

2UUL designed the Red Skull range for BGA stencil reballing. You press the paste through the stencil, lift the stencil away, and heat the pattern until the paste draws into clean spheres on each pad. The range is listed with four traits that decide whether a reballed IC seats properly or returns as a hardware fault: no false welding, low residue, good conductivity and oxidation resistance. A 148°C melting point also lowers the thermal demand compared with 183°C and 199°C grades, which helps when you work on heat-sensitive boards and want less thermal load on the parts around the IC.

Where RS148 Fits in Your Repair Workflow

On a typical bench, the paste enters the process after IC removal and pad cleaning, and before final placement and reflow. If you handle IC change karna on a dead phone, you can pair RS148 with a hot air station for controlled heating, a reballing kit with matching stencils for ball alignment, and a microscope for pad inspection. A PCB holder keeps the board steady while you apply the paste, and a multimeter confirms continuity once the chip is back on the board. The same paste also serves SMD component rework and general motherboard repair, so one 50g pack covers several job types on a busy day.

Choosing Between the Red Skull Temperature Grades

The four grades in the 2UUL Red Skull series let you match melting point to the component and the board. RS148 covers the low-temperature end for work where you want less heat than a 183°C paste demands. RS183 and RS199 cover jobs where a higher-melting paste suits your process, and RS138 sits at the lowest end of the range. If you run a repair shop with mixed workloads, you can stock more than one grade and pick per job. Technicians who also keep soldering stations, hot air stations and reballing kits on the bench usually build their paste choice around the heat profile of the station they use.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 148°C melting point within the Red Skull range
  • 50g pack for repeated reballing jobs
  • Designed for BGA stencil reballing
  • No false welding
  • Low residue
  • Good conductivity
  • Oxidation resistance
  • Suits SMD, CPU and motherboard-level rework

Specifications

Brand2UUL
ModelRS148
CategorySolder Paste
CompatibilityBGA stencil reballing, SMD rework, motherboard repair
TechnologyRed Skull low-temperature solder paste, 148°C melting point
Weight50g (net content)

Common Repair Uses

  • BGA stencil reballing and SMD rework at board level, in repair shops and service centers.
  • BGA stencil reballing
  • CPU reballing on phone boards
  • IC change karna on dead phone boards
  • SMD component rework
  • Motherboard-level repair for hardware faults
  • Pad tinning on cleaned PCB pads
  • Rework after pad cleaning and IC removal
  • Low-temperature soldering where a lower melting point helps

Compatible Devices

  • Universal — not device-specific. RS148 works on BGA, SMD and CPU-package soldering for mobile phone motherboards and PCBs, with no limit to a particular phone brand or chipset family.
  • Mobile phone motherboards (universal, not model-specific)
  • BGA ICs reballed with a stencil
  • CPU BGA packages
  • SMD components on phone PCBs
  • Boards needing a lower melting point than 183°C paste
  • Phone PCB pads prepared for reballing
  • General PCB repair boards
  • Electronics repair boards using BGA components

FAQ

What is the product name?
The product name is 2UUL RS148 Red Skull Solder Paste 148°C 50g.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is RS148.
What is this product used for?
This product is used for BGA stencil reballing, SMD rework and motherboard-level repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works for BGA, SMD and CPU-package soldering on mobile phone motherboards and PCBs.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of the 2UUL RS148 Red Skull solder paste?
The RS148 paste has a melting point of 148°C. It sits between the 138°C and 183°C grades in the 2UUL Red Skull range.
Is RS148 solder paste suitable for BGA stencil reballing?
Yes. The Red Skull range is designed for BGA stencil reballing, and it is listed with no false welding, low residue, good conductivity and oxidation resistance.