2UUL RS183 Red Skull Solder Paste 183°C 50g

₨ 1,200

183°C Red Skull Tin Paste for Reballing

The 2UUL RS183 solder paste is a mid-temperature Red Skull tin paste with a 183°C melting point, packed in 50g for steady bench use. It targets BGA stencil reballing, pad tinning, and SMD rework on mobile phone motherboards. You get smooth solder flow, strong bonding, and low residue. The paste resists false welding and oxidation. It also tins easily and holds together without cracking. Mechanicpk supplies RS183 to repair shops, service centers, and technicians across Pakistan who need a dependable 183°C grade between the lower-temperature and higher-temperature Red Skull options.

In stock

14 People watching this product now!
Description

Mid-Temperature Solder Paste Built for BGA Reballing Work

The 2UUL RS183 solder paste gives your bench a Red Skull tin paste that melts at 183°C and comes in a 50g pack for repeated stencil work. Technicians use it to reball BGA chips, tin motherboard pads, and rework SMD components. The 183°C grade sits between the 138°C and 148°C Red Skull options and the 199°C option, so you match the paste to the board and the component in front of you. You apply it through a stencil or by hand, then reflow it with your rework equipment until it forms a clean joint.

Why 183°C Matters on the Repair Bench

A 183°C melting point suits mid-temperature reballing. The paste gives you a workable thermal window for forming solder balls without pushing the profile to the upper end. When you reflow it on a stencil, the paste draws together into rounded balls on each pad. The flux system leaves low residue, so you spend less time cleaning the board after the job. You still wipe the area where the board needs it, because a tidy pad gives you a clearer view under the microscope.

The formula resists false welding, which protects you from the cold joints that cause a repaired board to fail after assembly. It also resists oxidation, conducts well, and holds its structure without cracking.

Reballing, Tinning and SMD Rework with 2UUL Red Skull Paste

Stencil reballing is the primary job for this paste. After you remove a BGA chip, you clean the pads, set the stencil, and spread the paste across the apertures. Each aperture fills evenly, and the paste tins easily onto the pad surface. The same paste handles CPU packages on phone boards, smaller SMD parts, and pad re-tinning before you place a new component.

In day-to-day Pakistani repair work, this covers the jobs that arrive as a dead phone or a hardware fault. You use it when IC change karna needs fresh pad tinning, and when you rebuild damaged pads before jumper lagana. Pair it with your reballing kits, a matching BGA stencil, a PCB holder for stable positioning, and a hot air station or soldering station you already trust. A microscope helps you inspect every ball after reflow.

Choosing the Right Red Skull Grade for Your Workflow

2UUL offers the Red Skull series in 138°C, 148°C, 183°C, and 199°C melting points to suit different repair needs and component sensitivities. RS183 works as the middle-of-the-range choice. If you work on boards that need a lower reflow temperature, you step down to the 138°C or 148°C grade. If you need a higher melting point, you step up to the 199°C grade. Keeping one jar of each grade on your bench covers most reballing and tinning situations without compromise.

The 50g pack lasts through many reballing jobs, which makes it practical for a shop that runs stencil work daily. Mechanicpk stocks RS183 so you can restock the grade you rely on and keep your reballing workflow running without gaps.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • 183°C melting point for mid-temperature reballing
  • 50g professional pack
  • Smooth solder flow with strong bonding
  • Low residue flux for easier board cleanup
  • No false welding
  • Good conductivity, no cleaning required
  • Oxidation resistance
  • Easy to tin and resists cracking

Specifications

Brand2UUL
ModelRS183 (Red Skull series)
CategorySolder Paste
CompatibilityUniversal tin paste for BGA, SMD, CPU and PCB repair; not device-specific
TechnologyMid-temperature tin paste, 183°C melting point
Weight50g

Common Repair Uses

  • Reballing, pad tinning and SMD rework on mobile phone boards
  • BGA stencil reballing
  • CPU reballing on phone motherboards
  • Pad tinning after IC removal (IC change karna)
  • SMD component rework
  • Re-tinning damaged pads before jumper lagana
  • Motherboard repair for dead phone and hardware fault cases
  • General PCB soldering where a 183°C paste fits

Compatible Devices

  • Universal — not device-specific; suits BGA, SMD, CPU and PCB repair work
  • BGA chips (stencil reballing)
  • SMD components
  • CPU BGA packages on mobile phone boards
  • Mobile phone motherboards and PCBs
  • Pads that need re-tinning
  • BGA reballing stencil setups

FAQ

What is the product name?
The product name is 2UUL RS183 Red Skull Solder Paste 183°C 50g.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is RS183.
What is this product used for?
This product is used for BGA stencil reballing, pad tinning, and SMD rework on mobile phone motherboards.
Which devices are compatible with this product?
This product is a universal tin paste for BGA, SMD, CPU and PCB repair work and is not specific to any single device.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What is the melting point of 2UUL RS183, and which other Red Skull grades does 2UUL offer?
RS183 melts at 183°C. The Red Skull series also comes in 138°C, 148°C, and 199°C grades.
Can I use 2UUL RS183 for BGA stencil reballing on phone CPUs?
Yes. The paste is listed for BGA stencil reballing, with low residue, no false welding, and easy tinning on pads.